2011 Toyota 4runner Sport on 2040-cars

Auto blog

How to fix a $4,000 hybrid battery problem with vinegar and baking soda

This is one of those 'Don't try this at home if you don't know what you're doing' DIY tales. Two weeks after imgur user "scoodidabop" bought a used Toyota Camry Hybrid with no warranty, he got the Christmas Tree dash display with warnings like "Check VSC System," "Check Hybrid System," and the Check Engine light. After some Internet sleuthing he figured it could be a faulty brake actuator, assuming the hybrid system warning was a false alarm. But it wasn't the actuator, it was the battery, a Toyota dealer telling him that his battery had "gone bad," and he'd need $4,457 to replace it. Then he had a brainstorm: it could be one of the cells that's gone bad, not the whole battery. Scoodidabop has some experience as an electrician, so he figured he could test it and replace any bad cells for about $45 apiece. He removed the battery unit from the trunk and over the course of two hours tested all 68 cells four times. He found nothing wrong. So he devised another type of test and checked every cell again. He couldn't find a problem with any of them. Turns out the problem wasn't in the cells, but with the dirty and corroded copper connectors at the ends of the high-voltage cables. He pulled the 34 connectors and their steel nuts, soaked them in vinegar, gave them a light steel wool scrub, soaked them in baking soda and water to counteract the vinegar, applied an anticorrosive and reinstalled them. That took an hour. When he replaced the battery, the warning lights had all gone out and the battery worked perfectly. Skill level: experience. Cost: less than $10. Perhaps it's time for hybrids to be able to test their own cells individually. Dealers, too.

Toyota Camry, Lexus RX to get aluminum parts

Ah, aluminum. The lightweight, strong material has long held a following within the premium ranks, but as Ford prepares to launch an aluminum F-150, the material is gaining acceptance among more mainstream automakers. Toyota is one such brand, with a new report indicating that the Japanese giant will add aluminum bits and bobs to some of its upcoming vehicles.
These won't be full, aluminum-intensive treatments like the F-150, however. Automotive News reports that an aluminum hood and liftgate will be coming to the 2016 Lexus RX, and following that, the Camry will get a bonnet built from Element 13 for model year 2018.
As AN points out, Toyota is no stranger to aluminum, using it in Japanese-built models like the Prius and Scion FR-S. The RX and Camry, though, will mark the first time the company's North American factories will use the material, and they'll do so on a significantly larger scale, owing to the higher volumes that the Camry and RX represent.

Sports 800 is a progenitor of Toyota performance

There's an automotive axiom that claims it's more fun to drive a slow car fast, than a fast car slow. If that's the case, then pushing a Toyota Sports 800 around must be one of the most exhilarating experiences behind the wheel in the world. With just 800cc of displacement from a two-cylinder boxer engine, the focus is on finesse over outright speed. Still, it's a fantastic page in Toyota's performance history, and Petrolicious takes a ride with a man who owns a meticulously restored 1967 example in its latest video.
The Sports 800 used the classic cost-saving strategy in the auto industry of taking parts from a standard model in the lineup and modifying it into a sports car. In this case that meant borrowing the engine from the plebian Toyota Publica, beefing it up for more power and clothing the whole thing a in beautifully shaped, wind-tunnel-honed body.
The look of these lithe, targa roadsters is the exact opposite of the rather dull styling sometimes associated with Toyota today. Everywhere you look there are louvers, vents or curves to draw the eye. Check out the latest Petrolicious video for a detailed look at the history of this rare model that's largely unknown on this side of the Pacific.