1997 Toyota 4 Runner Sr5 No Reserve on 2040-cars

Auto blog

Toyota shows a smoother autonomous Lexus for CES

Toyota is bringing a new research vehicle to CES. The TRI-P4 autonomous driving test vehicle, based on the Lexus LS500h, is a major step ahead, according to Toyota, as it has improved computing power and additional cameras for better reaction times. Earlier test mules have also used the LS as a basis, and the shift to the new, fifth generation LS brings chassis and steering-control benefits, so the vehicle's movements are smoother in automated mode. The camera tech has also been better integrated into the vehicle design, courtesy of CALTY in Ann Arbor, Michigan. Development has been swift, as the TRI's P2.1 car was unveiled in 2017. The P4 car will be used for Toyota Research Institute's Guardian and Chauffeur mode development. The two tiers differ somewhat, as TRI's Ryan Eustice explains: "Our Chauffeur development is focused on full autonomy, where the human is essentially removed from the driving equation, either completely in all environments, or within a restricted driving domain. Guardian, on the other hand, is being designed to amplify human performance behind the wheel, not replace it. The introduction of the new P4 platform will help us accelerate the development of both tracks when it joins our fleet this spring." The vehicle's situational awareness is boosted by two extra cameras facing on the sides, and a new imaging sensor both forward and rearward. Toyota says the P4's lidar setup is a carryover from the previous platform, but that its machine learning is much improved by its more powerful computer setup. The electricity required by the P4's computing power also comes from the hybrid battery, and as the computer "brain" is now housed vertically against the rear seat's backing, actual trunk space has been freed. More LS500hs will begin to be modified into TRI-P4 vehicles during spring 2019. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Question of the Day: What (non-Skyline) JDM car to import?

I have been looking into the idea of bringing a four-wheel-drive kei van over from Japan, something like a Honda Street or perhaps even a Mitsubishi Minicab Bravo Route 66, and so I have been researching the various bureaucratic hoops I must jump through in order to bring such a car into my state (Colorado). When I finally tracked down the state official who knew the answers, his very first words were "OK, so what year Skyline do you want to register here?" Yes, Nissan's not-sold-over-here factory-hot-rod of the 1980s and 1990s is what gets shipped over most often, but there are other worthy JDM vehicles. Say, for example, a stunning 1990 Mitsuoka Le Seyde (above), which was far classier than the Excalibur and based on the sporty S13 Nissan Silvia, aka 240SX. Of course, the king of JDM cars is the mighty Toyota Century, and you can get nice legal-to-import examples for reasonable prices. No, you can't get the V12 Century legally – yet; the V12-powered cars don't hit the 25-year-old mark until 2022. So, what's your choice for a 1991 or earlier Japanese-market car to import, assuming that the Skyline is off the table? Related Video: Auto News Honda Nissan Toyota Car Buying nissan skyline questions

The 2021 F-150 elevates Ford's bed game

The new 2021 Ford F-150 is ushering in a new era of pickup capability, but there's more to it than the introduction of the PowerBoost hybrid. While that new powertrain is certainly the truck's headlining element, the supporting electrical architecture enables a level of utility that hasn't been offered in past consumer half-tons. The true party trick is Ford's new "Pro Power Onboard" feature, which is essentially a built-in generator that provides juice for the 2021 F-150's rather robust in-bed power station. This system is available even on gasoline-engine models, but its utility is maximized with the electrified powertrain. ICE models equipped with the option max out at 2.0 kilowatts, while the PowerBoost hybrid can be had with either a 2.4- or a whopping 7.2-kilowatt inverter.  The idea here is that the F-150 can essentially stand in for a high-output portable generator. In a worksite example provided by Ford, a PowerBoost model with the 7.2-kW upgrade and a single tank of fuel could provide 32 hours of power for an 1,800-watt compound miter saw, a 1,000W circular saw, a 1,200W battery charger, a 1,200W hammer drill, and a 1,000W air compressor with hundreds of watts to spare for lighting and other accessories. But even without the Pro Power Onboard option, Ford's new bed setup enables more versatility than in previous models. The new Tailgate Work Surface option adds a flat work area with integrated rulers, recesses for pencils or small tools, and even a stand for a personal device.  Ford is neither the first to offer an auxiliary power outlet in a half-ton pickup bed, nor was Ford the first to introduce a more feature-rich tailgate. GMC's MultiPro tailgate was a major innovation on that front, and while it is geared mostly toward improving the cargo utility of the bed, it can also be customized with 12-volt power and even an accessory speaker system. The Ram 1500 is also offered with both a multi-function tailgate and AC power in the bed, though the latter option is limited to models with the RamBox cargo package.  As half-ton pickups approach levels of towing and hauling capability that begin to blur lines with heavy-duty offerings, it's clear that automakers are looking for ways to differentiate themselves without stepping on their own bigger trucks' toes. These new bed and tailgate innovations may yet be the tip of the iceberg when it comes to full-size pickup versatility. Related Video: