2006 Subaru Wrx Salvage on 2040-cars

Auto blog

2017 Subaru BRZ gets more power, optional Performance Pack

Most of the recent action with Toyobaru sports cars has centered around the Toyota side, which saw the Scion FR-S replaced by the updated and rebranded 2017 Toyota 86 for our market. Now, Subaru's version of the rear-drive coupe is getting a similar set of updates. It gets to keep its name, though. Like its Toyota-badged twin, the BRZ sees some engine updates – changes to the shared 2.0-liter, flat-four's internals are aimed at reducing friction. A new aluminum intake and a redesigned exhaust bump output up from 200 horsepower and 151 pound-feet of torque to 205 ponies and 156 lb-ft on manual-transmission models. To go along with that, the manual's final-drive ratio has been changed from 4.1:1 to 4.3:1, so there should be an improvement in acceleration. (Incidentally, this must have been Toyota meant when it said the 86 gets different manual gear ratios for 2017.) It's not the turbocharged engine some have been craving, but we can all agree that a little extra output is better than none. Those paying for the automatic transmission are left out, though. The Subaru has also gotten a small set of suspension updates. There are new springs and dampers, a larger rear sway bar, and some adjustments to structural braces to increase rigidity, so nothing too dramatic. Subaru has reprogrammed the stability-control system to allow drivers more freedom, which has led to a showy rebranding of the Sport mode to a new Track setting. A new option is the Performance Package, which includes Brembo brakes with upsized rotors fore and aft, new Sachs-branded shocks, and black 17-inch wheels. The Performance Pack is only available on Limited models with a manual transmission, further strengthening the argument against the auto. The Performance Pack also helps differentiate the Subie from its Toyota pal, as those items aren't available on the 86. There are some subtle aesthetic changes too, similar to those on the 86. (Noticing a pattern?) Subaru restyled the front and rear fascias, and added LED lamps at all four corners. Limited models come with a new 4.2-inch LCD display that sits to the right of the tachometer; in addition to mechanical info like oil temp, water temp, and battery voltage, it can show a G meter, a steering-angle indicator, gas/brake meters, and a stopwatch. The 2017 BRZ Premium and Limited will hit dealers in September. You'll have to wait until winter of 2017 to get your hands on a car equipped with the Performance Pack.

Subaru will reveal the Ascent 3-row crossover at the L.A. Auto Show

After about a year of concepts and spy photos, we finally know when we'll see the Subaru Ascent, the company's upcoming three-row crossover. Subaru announced on Twitter that the Ascent will make its debut on November 28 at this year's L.A. Auto Show. The announcement came with a teaser image, shown above, revealing the badge, rear taillight, and part of the bumper. We can tell that the Ascent will have a pretty upright hatch, and the rear bumper looks suitably "tough" with a brushed aluminum sill and black plastic cladding. View 17 Photos But really, we know quite a bit about what the crossover will look like, since we've seen two concepts, the Viziv-7 and Ascent Concept. Each was a progressively more conservative imagining of what the production model would be like. The basics involved a generally boxy shape with chiseled, exaggerated fenders, much like every other production Subaru. The Ascent Concept also previewed a possible powertrain for the vehicle, a turbocharged 2.4-liter flat-4. View 9 Photos We've also had a good look at the production version in some recent spy shots showing a nearly production-ready Ascent wrapped in just vinyl camouflage. Some of the more extreme lines have been further toned down compared with the concepts. But the theme of it being a bigger, boxier Subaru stuck around. In fact, it looks very much like a puffed up Outback, with which the Ascent will share a factory in Lafayette, Ind. Related Video:

Some 2019 Subaru Outbacks and Legacys recalled, owners could get new cars

Update: Subaru provided us with some updated details pertaining to this recall. Here's what the company had to say: "The cars in question can be and will be repaired; they will not be junked or scrapped. We are offering a replacement vehicle as to not inconvenience the owners. We expect the number of affected cars actually in owners hands to be between 12-20. We are checking the entire population, but the defect rate is low and we estimate just 200 cars are affected." Subaru is recalling a total of 2,107 brand-new vehicles due to faulty welds located on the duct below the cowl panel that could compromise the vehicle’s body strength, increasing the risk of injury in a crash. The 2019 Outback and 2019 Legacy are the two models involved with the recall. However, there are only 142 Legacys impacted, whereas 1,965 Outbacks are being called back. Subaru says customers will have a few options if they have one of the affected vehicles. YouÂ’ll be able to exchange the vehicle, let Subaru buy it back, or return the car for some intensive repairs. Perhaps this recall reminds you of the situation the Ascent was in last year. The large Subaru SUV was recalled due to it missing a series of spot welds on the B-pillar, weakening the structure. Subaru said it planned to destroy all 293 Ascents that were thought to be affected at the time. These new faulty welds are described differently than the ones we saw previously. HereÂ’s SubaruÂ’s explanation for what went wrong: “During the manufacturing process at the supplierÂ’s factory, the spot-welder tip is cleaned and re-shaped by a dresser (grinding machine). During production of potentially affected parts, the grinding machine may have been blocked by excess metal chips/powder, thus reducing the effectiveness of the welder.” Subaru reportedly told Consumer Reports that most of the vehicles being recalled havenÂ’t even reached the dealerships yet, with fewer than 20 of the vehicles in customer hands. That makes sense, as Subaru says the affected vehicles were built between May 31 and June 6, 2019. Subaru said a bodyshop employee initially noticed the defect on June 6, which prompted an internal investigation, leading to the recall. We asked Subaru if it could provide any more detail about the recall beyond what the official documents show — the latest information can be found at the top of the post. If you have a 2019 Outback or Legacy affected by this issue, expect to receive a letter in the mail soon.