1993 Subaru Impreza 4x4 Sedan 4-door 2.2 Liter on 2040-cars

Auto blog

New-gen 2020 Subaru Outback carries on its rugged legacy

The Outback is Subaru's best-selling vehicle, and for good reason. It's capable, it's versatile, it wears inoffensive looks, and it offers plenty of modern tech in a relatively affordable package. So when it came time to rework the model and introduce a new generation, Subaru took the less-is-more approach to the aesthetic redesign, which only has subtle tweaks. The major changes come inside the cabin and beneath the sheetmetal by introducing a more premium interior, and an all-new XT trim with a torquey new 2.4-liter turbocharged boxer engine. Similar to the approach used to update the 2020 Legacy, Subaru refined the Outback at every level. That started with the car's bones and the Subaru Global Platform. Subaru says the 2020 Outback is 70 percent stiffer in torsional and front-suspension rigidity and 100 percent stiffer in front lateral flex and rear subframe rigidity. The improved structure is also said to be 40 percent more absorbent in front and side crashes. More exciting is the introduction of multiple XT trims, which come standard with a 2.4-liter turbocharged boxer engine. Like the Legacy, the Outback is getting rid of the 3.6-liter six-cylinder engine in favor of the model's first turbocharged offering since 2009. It makes 260 horsepower at 5,600 rpm and 277 lb-ft of torque at 2,000 rpm, four more horsepower and 30 more lb-ft than the six-cylinder. Subaru notes the 2.4-liter engine offers a 3,500-pound towing capacity, which is an 800-pound improvement and the Outback's highest tow rating ever. It is estimated to get 23 mpg city and 30 mpg highway, compared to the 3.6's 20 mpg city and 27 mpg highway. All Outbacks come standard with permanent symmetrical all-wheel drive and a Lineartronic continuously variable transmission (CVT) that offer an "eight-speed" manual mode and paddle shifters. Base-model Outbacks continue to use a 2.5-liter naturally aspirated boxer engine, which Subaru says has 90 percent new parts. Its specs increase to 182 horsepower at 5,800 rpm and 176 lb-ft of torque at 4,400 rpm from 175 horsepower and 174 lb-ft in the previous model. With the slight increases in power comes a lighter and more agile suspension. Up front the Outback will have MacPherson struts with an internal rebound spring and a new 0.9-inch hollow stabilizer bar. In the back, a double wishbone setup with coil springs and a 0.75-inch hollow stabilizer bar. Overall, the Outback maintains its impressive 8.7 inches of ground clearance.

With the Subaru Viziv Performance Concept, be careful getting your hopes up

Subaru fans have reason to be excited. The company revealed the Viziv Performance Concept at the Tokyo Motor Show, and it's pretty obvious that it's a preview of a future WRX. The big vents, hood scoop, fenders, and its sedan profile all shout WRX. Someone from Subaru's design department even confirmed that the study could influence the next model. While admiring the concept's lines and imagining the next model, we, as well as some of our commenters, realized that we should keep our hopes and expectations low. The reason for this is that Subaru pulled a bit of a bait-and-switch with WRX styling before, back in 2013. That year, the company revealed the WRX Concept. It, like the Viziv Performance Concept, was a vented, scooped, flared, low-roof interpretation of the next WRX. Everyone loved it, and they were psyched to see a Subaru that could truly be described as beautiful, rather than say, unique, or interesting, or different, or any other kindhearted euphemism. View 11 Photos Then Subaru unveiled the production WRX for 2015. To the company's credit, it did manage to include design cues from the concept such as the fender flare lines and fascia shape, and it shared very few exterior panels with the Impreza. Unfortunately, it was still based on the Impreza platform, and those lines had to be pulled in and compressed onto the tall and narrow economy car. Without the low roof, ultra-wide fenders, and long, defined trunk, the car lost a lot in translation. The result thoroughly disappointed, and on occasion infuriated, fans. Basically, we've been burned before by Subaru's concepts. Heck, if you want more proof, take a look at the Subaru BRZ STI Performance concept that had a turbocharged engine. And yet, we still have no turbo BRZ on the market. But just because we're trying to be realistic doesn't mean Subaru won't surprise us with a close-to-concept WRX in the future. And the company is showing some signs that its concepts are more realistic. Looking at the evolution of the Viziv-7 concept into the Ascent concept and production prototypes, it seems a lot of the original design has survived. So hope isn't lost, just tempered. Related Video: Featured Gallery Subaru Viziv Performance Concept Tokyo Motor Show View 12 Photos Tokyo Motor Show Subaru Concept Cars Performance Sedan 2017 tokyo motor show subaru wrx concept subaru viziv perfromance concept

Subaru Ascent three-row SUV set for 2018 launch

Subaru revealed a three-row SUV concept Wednesday at the New York Auto Show in a surprise move that signals its return to the large utility segment in 2018. Called the Ascent concept, the show car had a turbocharged boxer 2.4-liter four-cylinder engine and will be revealed in production trim next fall at the Los Angeles Auto Show. The Ascent will be built in Lafayette, Ind., and is exclusive to the North American market. It will have room for up to eight passengers, offer all-wheel drive, and will be based on a modified version of Subaru's latest global platform. A hybrid is possible on those underpinnings, but a Subaru spokesman wouldn't comment on that prospect. Subaru has not had a three-row ute since the Tribeca was killed off in 2014. View 17 Photos With Volkswagen adding the Atlas and existing SUV makers like Ford, Chevrolet, Toyota, Honda, and others all putting greater emphasis on the large utility segment, Subaru felt compelled to respond. The company also expects the Millennial generation to make up a significant portion of Ascent buyers. "This is a product that allows that generation that grew up liking Subaru to stay with us," Subaru of America president Tom Doll said at the show. The Ascent concept's styling cues have evolved from the previous Visiv-7 concept and offer a better look at what the production model will look like. The Ascent concept measures 198.8 inches long, 78.3 inches wide and 72.4 inches tall. The wheelbase is 117 inches - signaling Subaru is serious about competing with large SUV producers. Subaru is spending $140 million and adding more 1,200 jobs at Lafayette to support the Ascent and bolster its US manufacturing footprint. Related Video: