2003 Subaru Baja ... Manual ..awd ..new Clutch on 2040-cars

Auto blog

2019 Subaru Crosstrek Hybrid PHEV electric range, according to CARB

Subaru's first plug-in vehicle is coming, and it's coming soon. The end of 2018 is upon us already, and the 2019 Subaru Crosstrek Hybrid is almost ready for primetime. This time around, it has a plug, a feature that is notably absent from the car's nomenclature, a la the Chrysler Pacifica Hybrid. It will also borrow its PHEV technology from Toyota and now, we have California Air Resources Board ( CARB) documents that suggest the Crosstrek Hybrid's all-electric range. According to the document (which can be seen in PDF form here), CARB rates the Crosstrek Hybrid's Urban Dynamometer Driving Schedule electric range at 25.650 miles. For what it's worth, the Toyota Prius Prime with which this Subaru shares powertrain tech, has an EPA-estimated all-electric range of 25 miles and a highway electric range of 21.9 miles. The document also lists an "equivalent" all-electric urban range of 26.273 miles and "equivalent" all-electric highway range of 27.381 miles. ("Equivalent" range calculations come into play when PHEVs use a mix of electric and gas power at the same time.) The Crosstrek, which will use Subaru's own 2.0-liter gasoline engine, doesn't appear to suffer a reduction in electric range compared to the Prius Prime despite its size, elevated ride height or all-wheel-drive system, which raises a lot of questions. The reasons are still unclear, as we don't have a lot of details about the underpinnings of the 2019 Crosstrek Hybrid, and we can't help but be skeptical about those figures. Will it have a bigger battery than the Prime's 8.8-kWh pack? Will the electric motor drive all four wheels, or will it only power one axle under all-electric power? What other mitigating factors could add efficiency and, in effect, range to this Subaru? Are these calculations, in fact, indicative of the yet-to-be-announced official figures? Of course, we'll have to see how the EPA's final estimated driving range shakes out before we draw our official comparisons. We'll know a lot more when the 2019 Crosstrek Hybrid gets its official debut before the end of this year, plug and all. Related Video: News Source: California Air Resources BoardImage Credit: Subaru Green Subaru Fuel Efficiency Crossover Electric Hybrid PHEV

2019 Subaru Forester Long-Term Update | It's gold wheel time!

Our long-term 2019 Subaru Forester is heading into the new year with a new set of shoes. Subaru’s all-wheel-drive system works perfectly fine, but all-wheel power is no replacement for a set of winter tires. And so our search for winter rubber began. However, the search didnÂ’t take that long, as a set of wheels and tires that fit our Forester happened to be laying around Autoblog HQ collecting dust. The wheels just so happened to be lightweight, gold 17-inch Sparco wheels we had previously fitted to our 2015 Subaru WRX long-term tester. Imagine our glee when we pulled these bad boys out of storage.  ItÂ’s only fitting that the blue Subaru in our long-term test fleet is also fitted with gold wheels as a tribute to all the gold-wheeled Subaru rally legends. The new Forester is nothing like a WRX or STI, but this setup has us smiling every time we walk out to the car. Take a nice, long scroll through the gallery above. We canÂ’t stop obsessing over how much better they make the new Forester look. Maybe a special edition package Â… just a thought, Subaru. Mounted on these wheels are new Michelin X-Ice winter tires. WeÂ’ve already driven it through a couple snowfalls in the midwest region, and the tires make this crossover a nearly unstoppable winter force. We hope to get some serious snow this winter that allows us to really take advantage of the new tires and the ForesterÂ’s high 8.7-inch ground clearance. More on that and the ForesterÂ’s performance to come. Unfortunately, the spare set of wheels we had lying around didnÂ’t have tire pressure monitoring sensors for the Forester sitting next to them. Until the little yellow light in the dash starts annoying us, weÂ’re going to forego the expense of buying a new TPMS at the Subaru dealer — we imagine many owners skip the extra $150 or so for the sensors and check their tire pressure the old-fashioned way with winter wheels, too. After all, the tire pressure gauge still exists, and it works splendidly. Watch out for another Forester update soon, as we get into some of the things weÂ’ve liked and disliked over the past few months. Related video:

Some 2019 Subaru Outbacks and Legacys recalled, owners could get new cars

Update: Subaru provided us with some updated details pertaining to this recall. Here's what the company had to say: "The cars in question can be and will be repaired; they will not be junked or scrapped. We are offering a replacement vehicle as to not inconvenience the owners. We expect the number of affected cars actually in owners hands to be between 12-20. We are checking the entire population, but the defect rate is low and we estimate just 200 cars are affected." Subaru is recalling a total of 2,107 brand-new vehicles due to faulty welds located on the duct below the cowl panel that could compromise the vehicle’s body strength, increasing the risk of injury in a crash. The 2019 Outback and 2019 Legacy are the two models involved with the recall. However, there are only 142 Legacys impacted, whereas 1,965 Outbacks are being called back. Subaru says customers will have a few options if they have one of the affected vehicles. YouÂ’ll be able to exchange the vehicle, let Subaru buy it back, or return the car for some intensive repairs. Perhaps this recall reminds you of the situation the Ascent was in last year. The large Subaru SUV was recalled due to it missing a series of spot welds on the B-pillar, weakening the structure. Subaru said it planned to destroy all 293 Ascents that were thought to be affected at the time. These new faulty welds are described differently than the ones we saw previously. HereÂ’s SubaruÂ’s explanation for what went wrong: “During the manufacturing process at the supplierÂ’s factory, the spot-welder tip is cleaned and re-shaped by a dresser (grinding machine). During production of potentially affected parts, the grinding machine may have been blocked by excess metal chips/powder, thus reducing the effectiveness of the welder.” Subaru reportedly told Consumer Reports that most of the vehicles being recalled havenÂ’t even reached the dealerships yet, with fewer than 20 of the vehicles in customer hands. That makes sense, as Subaru says the affected vehicles were built between May 31 and June 6, 2019. Subaru said a bodyshop employee initially noticed the defect on June 6, which prompted an internal investigation, leading to the recall. We asked Subaru if it could provide any more detail about the recall beyond what the official documents show — the latest information can be found at the top of the post. If you have a 2019 Outback or Legacy affected by this issue, expect to receive a letter in the mail soon.