2013 Subaru Xv Crosstrek 2.0i Limited on 2040-cars

Auto blog

Subaru teasing STI surprise for NYC show?

Subaru is no stranger to the Special Edition car, least of all where its vaunted WRX and STI are concerned. From Spec C to Prodrive to 22B, more than a handful of STI's around the world have been released as limited-run editions, often with stirring results. So, while we were more than a little bit surprised to see that big-wing crop up on the Subaru Twitter page today, we can't say as though its not true to the brand's history.
However, while most of the interesting WRX STI variants have been offered to Europe and Japan only, whatever is wearing that carbon-fiber-lipped wing is set to debut at the New York Auto Show this week.
We don't have a clue as to the precise nature of the car in front of that wing, save to say that it's likely based on the STI. We can guess, however that the extra vertical supports and the use of carbon fiber indicate a higher-performance version than currently exists. Anything from a racing application to some new goodies for the aftermarket are in the realm of possibility.

2020 Subaru Outback Suspension Deep Dive | More than meets the eye

The 2020 Subaru Outback is a completely redesigned car. It has a lot to offer in terms of new convenience features, and the driving experience is much improved. A good deal of that comes from chassis improvements, and indeed a lot of work went into making the body shell and suspension subframes more rigid so the suspension attachment points could be more robust and stable. Don’t let all of that rigidity talk make you think the ride itself is stiff. It isnÂ’t. Any suspension tuning engineer will tell you that a stable platform is necessary even if a smooth ride is the goal. Rigid attachment points make it easier to control ride motions and road imperfections within those components designed for that very job – the springs, dampers and suspension bushings. So letÂ’s take a look at what Subaru has done under the new Outback. What weÂ’re about to see doesnÂ’t just apply to the Outback wagon, but to the closely-related and also-redesigned 2020 Legacy sedan as well.   ItÂ’s no surprise that a vehicle like the Subaru Outback uses strut front suspension, but from here, a couple of details do look curious.   Like any strut suspension, the steering axis (yellow line) is defined by the pivot bushing at the top of the strut and the center of the lower ball joint. The entire affair will pivot about this line when the wheels are turned. The lower control arm (red) of the newly redesigned 2020 Outback is now a lightweight aluminum piece instead of the steel hunk that was used last year. As before, thereÂ’s a “direct-acting” stabilizer bar link (green) that attaches to the strut housing, an arrangement that maximizes the efficiency of the stabilizer bar because the motion ratio is 1-to-1 motion with respect to wheel movement. As for the stabilizer bar itself, itÂ’s now hollow to save a bit of weight.   This spacer (yellow) raises the body relative to the suspension. The Outback has one, but the lower-riding Legacy sedan does not. The spacer pushes the arm down (or the body up - take your pick), so that means the OutbackÂ’s reinforcing bracket (green) will also differ from that of the Legacy. While weÂ’re here, look at the round rubber bushing just below the spacer. That void space and square nub you see pointing directly at you will make sense in a short while.   Subaru couldnÂ’t simply put a spacer on the OutbackÂ’s rear lower control arm pivot and call it good. They had to do something of similar magnitude at the front.

Subaru profits fall by half last year among recall maladies

Subaru took a financial beating last year, according to its freshly released earnings report. During the full fiscal year, which ended March 31, the carmaker's operating profits effectively halved. Net income dropped 33% to 147.81 billion yen, or $1.33 billion, and revenue fell 2.2% to 3.16 trillion yen ($28.5 billion). Subaru states that its operating income declined by 48.5% to 195.5 billion yen, or to about $1.78 billion. According to Subaru, this was not only due to a decrease in sales, but also due to recall campaigns. Total production decreased nearly 6% to 989,000 units, and production stoppages at the Gunma plant were partially to blame for that — but Impreza, XV and Levorg sales also sank. The redesigned Forester did start out well in the summer, but sales in the first half of 2018 were more modest with the outgoing generation still in the showrooms. The Gunma manufacturing plant, Subaru's sole factory in Japan, ground to a halt in January 2019 to remedy issues with Forester, Crosstrek and Impreza electric power steering units, and that cost Subaru nearly 10 days of production, corresponding to around 30,000 vehicles. Earlier, there was a 500,000-vehicle recall in Japan due to fraudulent final inspections. Automotive News also lists other recent Subaru maladies, such as a low-fuel warning recall and stop-sale for all U.S-market Outbacks and Legacys, and the earlier, global recall to repair valve springs on the boxer engines of 411,000 vehicles. This particular recall hasn't been problem-free, as there have been cases where subsequent engine failures on BRZ models have been suspected of having been caused by slapdash recall work. There is also a new, large-scale recall in the horizon for Subaru, as a brake light issue on 2008-2017 vehicles necessitates the recall of some 2.3 million vehicles. However, it's not all bleak for Subaru, as U.S. sales are going strong. The carmaker predicts 2019 will be the 11th straight record year, and U.S. retail sales climbed 7.7 percent in April, which was the 89th consecutive month with increased sales. But still, not all Subaru markets are equal: On the North American market, Subaru sold 717,000 vehicles during the past fiscal year, an enormous percentage of its total sales. News Source: Subaru via Automotive News Plants/Manufacturing Recalls Subaru