2020 Subaru Outback Premium Wagon 4d on 2040-cars

Auto blog

2020 Subaru Legacy spied with significantly revised styling

The current Subaru Legacy has been roughly the same car since it was introduced for the 2015 model year, with just a very light restyle for 2018. As such, it makes sense that Subaru is preparing a much more comprehensive redesign. One of our spy photographers caught the next Subaru Legacy midsize family sedan with that very update hidden by a thin vinyl wrap. From the looks of it, the new car will still be built off the existing platform. The entire greenhouse and glass area is practically identical to that of the current model. Aside from that, it every other panel has been massaged in some way. Up front, the grille looks a little shorter in height, but also stretched wider. The sides have more slant to them, too. The headlights have more of an upward sweep to them, as well. Overall, these changes give the Legacy more of a friendly smile as opposed to the blunt, chunky look of the current model. The lower grille and fascia have also been updated. Along the sides, the deep creases of the current model have been softened. The shoulder line that rises up over the rear wheel also gets a little bit of a dip at the leading edge near the front wheel. While the glass area is pretty much the same, the fake window trim on the C-pillar has been elongated to match a slightly more drawn out roof line. Finally at the back, the trunk lid looks more upright than that on the current model. The taillights have more molded shaping to them. Also noteworthy is the fact that this version has no exposed exhaust tips. The rear bumper is smooth all the way across. Subaru has already revealed the 2019 Legacy and Outback, both of which are basically unchanged except some new feature content. As such, the soonest this car will be out will be for the 2020 model year. That seems fairly probable, too, considering how close this car looks to being production ready and the age of the current Legacy. Related Video: Featured Gallery 2020 Subaru Legacy View 18 Photos Image Credit: SpiedBilde Spy Photos Subaru Sedan

2019 Subaru Forester: Refined by evolution

Here it is, the all-new 2019 Subaru Forester, a lot like it was before, and a lot different. Spy shots clued us in to evolutionary exterior on this fifth generation, which Subaru dubs "a more rugged style." Taking cues from the Ascent, instead of bodysides decorated with a couple of character lines, Subaru designers stressed the sculpture of the entire span. In front, A larger, black gloss-finish grille cuts deeper into the bumper from the top. The headlight housings carry over in shape, but now hold LED lamps standard on all trims. Along the sides, punched-out wheel arches frame an angled shoulder that cuts into the C-pillar and wraps around the side glass. Design tweaks and the move to Subaru's Global Platform bring a 1.2-inch longer wheelbase and 1.4 more inches of rear legroom. Occupants up front sit in new, more comfortable seats and enjoy more space in the center tunnel thanks to an electronic parking brake. In back, wider rear door openings and a steeper C-pillar allow easier ingress. The tailgate opening increases by 5.3 inches in width, onto a squarer cargo area with a flatter floor and a standard cargo tray. An interior LED illuminates the load bay when the tailgate's open, an exterior floodlight shines outside the rear of the crossover. Lower the rear seats and access 76.1 cubic feet of loading room, 1.9 cu. ft. more than before. The carmaker says you can put golf bags in the car sideways without needing to tilt them, an arcane, yet commendable, achievement. A trim shakeup adds a new variant, the lineup being Base, Premium, Limited, Touring, and a new Sport model. Base and Premium ride on 17-inch wheels, the others get 18-inchers. All Foresters are powered by an "enhanced" version of the present 2.5-liter boxer four-cylinder with direct injection, higher compression, and active exhaust valve control. The engine now makes 182 horsepower, a 12-hp improvement, and 176 pound-feet of torque, a 2-lb-ft improvement. For you Forester experts, that means yes, the 250-hp, 2.0-liter turbocharged engine vacates the premises. Every trim gets a Lineartronic CVT and stop/start. Touring and Sport models get a manual mode and paddle shifters, mimicking a seven-speed gearbox. The Subaru Intelligent Drive (SI-DRIVE) offers Intelligent and Sport drive modes (Sport Sharp on the Sport trim); Intelligent prioritizes fuel economy, Sport maximizes thrills. Fuel economy reaches as high as 33 miles per gallon on the highway, depending on trim.

2020 Subaru Outback Suspension Deep Dive | More than meets the eye

The 2020 Subaru Outback is a completely redesigned car. It has a lot to offer in terms of new convenience features, and the driving experience is much improved. A good deal of that comes from chassis improvements, and indeed a lot of work went into making the body shell and suspension subframes more rigid so the suspension attachment points could be more robust and stable. Don’t let all of that rigidity talk make you think the ride itself is stiff. It isnÂ’t. Any suspension tuning engineer will tell you that a stable platform is necessary even if a smooth ride is the goal. Rigid attachment points make it easier to control ride motions and road imperfections within those components designed for that very job – the springs, dampers and suspension bushings. So letÂ’s take a look at what Subaru has done under the new Outback. What weÂ’re about to see doesnÂ’t just apply to the Outback wagon, but to the closely-related and also-redesigned 2020 Legacy sedan as well.   ItÂ’s no surprise that a vehicle like the Subaru Outback uses strut front suspension, but from here, a couple of details do look curious.   Like any strut suspension, the steering axis (yellow line) is defined by the pivot bushing at the top of the strut and the center of the lower ball joint. The entire affair will pivot about this line when the wheels are turned. The lower control arm (red) of the newly redesigned 2020 Outback is now a lightweight aluminum piece instead of the steel hunk that was used last year. As before, thereÂ’s a “direct-acting” stabilizer bar link (green) that attaches to the strut housing, an arrangement that maximizes the efficiency of the stabilizer bar because the motion ratio is 1-to-1 motion with respect to wheel movement. As for the stabilizer bar itself, itÂ’s now hollow to save a bit of weight.   This spacer (yellow) raises the body relative to the suspension. The Outback has one, but the lower-riding Legacy sedan does not. The spacer pushes the arm down (or the body up - take your pick), so that means the OutbackÂ’s reinforcing bracket (green) will also differ from that of the Legacy. While weÂ’re here, look at the round rubber bushing just below the spacer. That void space and square nub you see pointing directly at you will make sense in a short while.   Subaru couldnÂ’t simply put a spacer on the OutbackÂ’s rear lower control arm pivot and call it good. They had to do something of similar magnitude at the front.