2014 Subaru Outback 2.5i Limited on 2040-cars

Auto blog

2016 Subaru Outback, Legacy recalled for driveshaft problem

The Basics: Subaru is recalling 3,251 examples of the 2016 Legacy built between Oct. 24, 2015, and Nov. 16 2015, and the 2016 Outback manufactured between Oct. 24, 2015, and Nov. 17, 2015. The Problem: The driveshaft could separate from the rear differential because the securing nuts aren't tight enough. If this happens, the driveshaft could hit the gas tank, leading to a fuel leak. Injuries/Deaths: Subaru spokesperson Michael McHale confirms to Autoblog there are no reports of accidents, injuries, or fires. The fix: Subaru dealers will inspect the nuts and tighten or replace them as necessary. If you own one: Subaru expected the recall to begin on December 10, so owners should receive notification very soon. Related Video: RECALL Subject : Drive Shaft May Detach From Differential Report Receipt Date: NOV 24, 2015 NHTSA Campaign Number: 15V794000 Component(s): POWER TRAIN Potential Number of Units Affected: 3,251 All Products Associated with this Recall Vehicle Make Model Model Year(s) SUBARU LEGACY 2016 SUBARU OUTBACK 2016 Details Manufacturer: Subaru of America, Inc. SUMMARY: Subaru of America, Inc. (Subaru) is recalling certain model year 2016 Legacy vehicles manufactured October 24, 2015, to November 16, 2015, and Outback vehicles manufactured October 24, 2015, to November 17, 2015. Due to the improper tightening of the securing nuts, the drive shaft may separate from the rear differential. CONSEQUENCE: If the drive shaft detaches from the rear differential, it may strike the fuel tank and result in a fuel leak, increasing the risk of a fire. REMEDY: Subaru has notified owners, and dealers will inspect the fastening nuts, and tighten or replace them, as necessary, free of charge. The recall began on December 10, 2015. Owners may contact Subaru customer service at 1-856-488-8500. Subaru's number for this recall is WQV-57. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Subaru Legacy pitted against Roadkill project cars

There's an evergreen debate among auto enthusiasts about whether they would prefer to have the latest and greatest car of today or a certified classic from yesteryear. What if you had to further define that, though, and the choice was between a brand new 2015 Subaru Legacy or a turbocharged Datsun 240Z with a hatch that wouldn't close? Roadkill aimed to find out that and more in one of its best videos to date.
According to the hosts, Subaru came to them, handed over some money and challenged Roadkill's project cars against its latest Legacy. The result is every bit as good (or better) than any automotive-themed show you could find on television.
Things start simple with a figure-eight race in a rodeo arena with the Subaru taking on Roadkill's 1968 Ford Ranchero, originally built for ice racing. From there the Legacy races a 1968 Dodge Charger with no windows around and off-road rally stage. Finally, the Subie goes head-to-head against the Rotsun, the aforementioned turbocharged 240Z, through an abandoned neighborhood. Plus, there's a bonus drag race challenging them all.

Subaru Crosstrek gets an injection of Baja racer DNA from Crawford Performance

Subaru's idea of updating the Crosstrek is dropping a bigger, 2.5-liter flat-four engine in the engine bay. American tuner Crawford Performance has other plans for the city-friendly crossover. It turned the model into an off-roader enhanced with a lift kit, skid plates, and extra lights reminiscent of Subaru's rallying past, among other add-ons. California-based Crawford Performance knows what it takes to improve a Subaru. It's one of the companies responsible for the Crosstrek Baja Racer introduced in 2019, and it's the only aftermarket parts manufacturer ever factory-backed by Subaru. The suspension lift it developed for the second-generation Crosstrek adds 2 inches of ground clearance to the front axle and an extra inch and a half to the rear. For context, the Crosstrek sits 8.7 inches off the ground when it rolls off the assembly line, so the lift alone raises it above the 10-inch mark. Subaru didn't develop the Crosstrek for hardcore off-roading, so Crawford added tubular bumper overriders on both ends and over both rocker panels, aluminum skid plates that protect vital mechanical components from oily (and expensive) encounters with boulders, and additional lights mounted in front of the door mirrors. Spot lights and 15-inch alloy wheels wrapped by beefy tires ensure you can see what's ahead and effortlessly drive over it. Crawford kept the stock, naturally-aspirated 2.0-liter flat-four engine but Top Gear learned it installed an air-oil separator and intake spacers to increase its output from 152 to 167 horsepower. That's not a huge bump, but it should be enough to make the Crosstrek a little peppier. The four-cylinder still spins the four wheels through a continuously variable transmission (CVT), and it exhales through an upgraded exhaust for a rally car-like sound. Adventurers who want to build a lifted Crosstrek need to set aside $550 for the kit, which includes aluminum strut spacers, strut extensions, and other bits and pieces like sway bar link extensions. Other parts like the skid plates, the air-oil separator, and the tubular add-ons are sold separately. And, of course, you'll need a good set of tires. If you're not a DIYer, Top Gear reported Crawford plans to sell a fully-assembled model positioned between the production Crosstrek and a purpose-built race car. It will cost approximately $35,000 when it goes on sale.  Related Video: