2010 3.6 R Limited Used 3.6l H6 24v Automatic Awd on 2040-cars

Auto blog

Junkyard Gem: 2003 Subaru Legacy Outback H6-3.0

Living in Denver and spending a great deal of time in local wrecking yards, I see plenty of discarded Subarus. It's an unwritten law that every Denver resident must own a dog and a Subaru, which means you'll find dog water bowls in front of most businesses and Subarus in most parking spaces. When Outbacks wear out, they end up in local junkyards. With 2 million Outbacks sold, I don't photograph most of them, for the same reason I don't photograph Altimas or F-150s. But a rare H6-3.0 Outback is another story; here's a very clean '03 spotted in a Mile High self-service yard. The six-cylinder Outback debuted for the 2001 model year, and it wasn't cheap. For 2003, the list price on an H6-3.0 wagon started at $26,995 (about $37,000 in 2018 dollars), versus $23,770 for the four-cylinder version with five-speed manual tranmsission. You couldn't get a three-pedal version of the H6-3.0, but fewer and fewer Outback shoppers wanted manual transmissions by that time, anyway. With 212 horsepower, these cars were gratifyingly quick compared to the four-cylinder versions. I own a 2004 Outback with the 2.5-liter H4 and 5-speed manual, and it requires a great deal of patience on freeway onramps and steep grades. Subaru was very proud of the H6 engine at this time, so this car is covered with badges boasting of the six pistons lying sideways under the hood. There's one on the grille, one on the hatch, one on the center console, and a couple under the hood. This car was so clean that I considered buying the seats for my own somewhat battered '04. The original paperwork and manuals were still inside, showing that the original purchaser didn't go too crazy with the options. The car was sold just a few miles from its final resting place. The digital odometer made it impossible for me to determine total mileage, but I'm guessing this is a well-cared-for high-mile car that got traded in on a new Outback, then wasn't worth selling as a used car due to some expensive mechanical problem. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. "Ah, the rugged outdoorsy type. Nice choice."

2020 Subaru Outback Suspension Deep Dive | More than meets the eye

The 2020 Subaru Outback is a completely redesigned car. It has a lot to offer in terms of new convenience features, and the driving experience is much improved. A good deal of that comes from chassis improvements, and indeed a lot of work went into making the body shell and suspension subframes more rigid so the suspension attachment points could be more robust and stable. Don’t let all of that rigidity talk make you think the ride itself is stiff. It isnÂ’t. Any suspension tuning engineer will tell you that a stable platform is necessary even if a smooth ride is the goal. Rigid attachment points make it easier to control ride motions and road imperfections within those components designed for that very job – the springs, dampers and suspension bushings. So letÂ’s take a look at what Subaru has done under the new Outback. What weÂ’re about to see doesnÂ’t just apply to the Outback wagon, but to the closely-related and also-redesigned 2020 Legacy sedan as well.   ItÂ’s no surprise that a vehicle like the Subaru Outback uses strut front suspension, but from here, a couple of details do look curious.   Like any strut suspension, the steering axis (yellow line) is defined by the pivot bushing at the top of the strut and the center of the lower ball joint. The entire affair will pivot about this line when the wheels are turned. The lower control arm (red) of the newly redesigned 2020 Outback is now a lightweight aluminum piece instead of the steel hunk that was used last year. As before, thereÂ’s a “direct-acting” stabilizer bar link (green) that attaches to the strut housing, an arrangement that maximizes the efficiency of the stabilizer bar because the motion ratio is 1-to-1 motion with respect to wheel movement. As for the stabilizer bar itself, itÂ’s now hollow to save a bit of weight.   This spacer (yellow) raises the body relative to the suspension. The Outback has one, but the lower-riding Legacy sedan does not. The spacer pushes the arm down (or the body up - take your pick), so that means the OutbackÂ’s reinforcing bracket (green) will also differ from that of the Legacy. While weÂ’re here, look at the round rubber bushing just below the spacer. That void space and square nub you see pointing directly at you will make sense in a short while.   Subaru couldnÂ’t simply put a spacer on the OutbackÂ’s rear lower control arm pivot and call it good. They had to do something of similar magnitude at the front.

2018 Subaru Ascent three-row crossover SUV spotted showing off its shape

These images give us our best look so far at the Subaru Ascent, a new-for-2018 three-row crossover to fill the hole in Subaru's product lineup since the unloved Tribeca was discontinued after 2014. This prototype is lightly coated in a body-hugging camouflage wrap and appears to take its design from the Highlander-on-steroids Viziv-7 Concept that debuted at November's Los Angeles Auto Show. An exec from Subaru's parent company said at the time that "the next three-row from Subaru will be the biggest Subaru vehicle ever." That's for sure: The wheelbase is 117.7 inches and the overall vehicle measures 204.7 inches - a bit longer than a Chevy Tahoe. Subaru may well debut the production Ascent at the New York Auto Show in April. In the meantime, check out the spy shots above. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. View 14 Photos Related Video: