2001 Subaru Outback Base Wagon 4-door 2.5l on 2040-cars

Auto blog

Some 2019 Subaru Ascent owners will get brand-new cars due to recall [UPDATE]

UPDATE: After inspection, it turns out that the issue of missing welds on Subaru Ascent models built between July 13 and July 21, 2018, was much smaller than initially thought. A Subaru spokesperson informs us that "none of the customer vehicles included in the recall were affected." According to Subaru, 293 brand-new 2019 Ascent crossovers built between July 13 and July 21, 2018, are missing a series of spot welds on the B-pillar. These welds add strength to the shell of the car right where the rear doors attach, which makes them extremely important to the overall structure of the vehicle. The issue was caused by improper programming of the robots that add these welds as the vehicle rolls down the assembly line. What makes this recall particularly interesting is that 9 of these 293 affected Ascent models are already in the driveways of paying customers, and those owners are going to get brand-new replacement vehicles. The other 284 affected Ascents are either sitting on dealer lots or in transit. All 293 models without the proper B-pillar welds will be destroyed and replaced. If you're the owner of a 2019 Ascent that may be affected by this recall, you can contact your local dealer with your VIN number, or check online to find out if your vehicle is one of the 293 with missing welds. And since it's a very real safety issue, we'd recommend you check your VIN immediately, because the missing welds cannot be identified just by a visual inspection. Related Video:

Subaru recalling 32K Imprezas for potential airbag fault

Following a preliminary evaluation by the National Highway Traffic Safety Administration in April 2015, Subaru is recalling 32,400 examples of the 2012 Impreza sedan and hatchback to repair the Occupant Detection System. The affected vehicles have production dates between April 21, 2011, and February 16, 2012. However, the WRX and STI are excluded from this campaign because they use a different part. The Impreza's problem concerns the front passenger seat's Occupant Detection System. In these models, the part uses capacitance to determine if someone is present and activates the airbag. According to the documents submitted to NHTSA (as a PDF), if the person sitting there uses a device plugged into the accessory outlet or touches an electrically grounded part like the metal seat adjuster, the ODS recognizes an increase in capacitance. It can then deactivate the airbag. Obviously, this could be a hazard in a crash, but there would be a warning light showing the safety device as off. To solve the problem, dealers will install a modified Occupant Control Unit. The initial investigation was prompted after 26 complaints to NHTSA about the ODS not working properly. In 2012, Subaru also issued a technical service bulletin that attempted to repair the issue. Related Video: RECALL Subject : Front Passenger Air Bag may not Deploy Report Receipt Date: JUL 01, 2015 NHTSA Campaign Number: 15V419000 Component(s): AIR BAGS Potential Number of Units Affected: 32,400 All Products Associated with this Recall Vehicle Make Model Model Year(s) SUBARU IMPREZA 2012 Details Manufacturer: Subaru of America, Inc. SUMMARY: Subaru of America, Inc. (Subaru) is recalling certain 2012 model year Subaru Impreza 4-Door and Station Wagon vehicles (except WRX/STI models) manufactured April 21, 2011, to February 16, 2012. In the affected vehicles, the Occupant Detection System (ODS) may deactivate if a front seat passenger operates a device that is plugged into the power outlet such as a music player or cell phone, or touches a metal part of the vehicle such as the forward/rearward seat adjuster lever. CONSEQUENCE: If the ODS deactivates, the front passenger air bag will be turned off and the front passenger air bag will not deploy in the event of a crash, increasing the risk of injury to the seat occupant. REMEDY: Subaru will notify owners, and dealers will replace the Occupant Control Unit with a modified one, free of charge. The manufacturer has not yet provided a notification schedule.

Toyota GT86 engineers explored shooting brake and sedan variants, are they still in the cards?

According to the Toyota UK blog, engineers for the automaker were so excited developing the GT86 coupe that they investigated producing a whole family of models based on the rear-wheel drive sports car. And at least one engineer - product chief Tetsuya Tada - still hopes it can happen, even if not everyone at Toyota is onboard. Tada: "Actually we tried to do this secretly but the executives found us out. They said: 'What are you doing? Will you please focus on the coupe.'"
Those mooted variants included both a four-door sedan and a shooting brake. Why? Aside from the pure excellence of a lightweight, brilliantly handling hatchback, Toyota was keenly aware of the fact that it may need to spread the cost of development out across several models. Tada says that's part of the reason why it was so easy to create the convertible. The company knew from the outset that a softtop version was in the cards, and built the machine's structure to accommodate having the roof sliced off.
Tada also made mention of the already-announced collaboration between Toyota and BMW. The engineer said that the GT86 was particularly helpful because it demonstrated just how successful a product conceived and designed by two different companies can be. While he didn't say exactly what Toyota and BMW are up to, it's clear the two are looking into a number of possibilities. It's an interesting read with a lot of