2008 Subaru Legacy 2.5i Sedan 4-door 2.5l on 2040-cars

Auto blog

Some 2019 Subaru Ascent owners will get brand-new cars due to recall [UPDATE]

UPDATE: After inspection, it turns out that the issue of missing welds on Subaru Ascent models built between July 13 and July 21, 2018, was much smaller than initially thought. A Subaru spokesperson informs us that "none of the customer vehicles included in the recall were affected." According to Subaru, 293 brand-new 2019 Ascent crossovers built between July 13 and July 21, 2018, are missing a series of spot welds on the B-pillar. These welds add strength to the shell of the car right where the rear doors attach, which makes them extremely important to the overall structure of the vehicle. The issue was caused by improper programming of the robots that add these welds as the vehicle rolls down the assembly line. What makes this recall particularly interesting is that 9 of these 293 affected Ascent models are already in the driveways of paying customers, and those owners are going to get brand-new replacement vehicles. The other 284 affected Ascents are either sitting on dealer lots or in transit. All 293 models without the proper B-pillar welds will be destroyed and replaced. If you're the owner of a 2019 Ascent that may be affected by this recall, you can contact your local dealer with your VIN number, or check online to find out if your vehicle is one of the 293 with missing welds. And since it's a very real safety issue, we'd recommend you check your VIN immediately, because the missing welds cannot be identified just by a visual inspection. Related Video:

2016 Subaru Outback, Legacy recalled for driveshaft problem

The Basics: Subaru is recalling 3,251 examples of the 2016 Legacy built between Oct. 24, 2015, and Nov. 16 2015, and the 2016 Outback manufactured between Oct. 24, 2015, and Nov. 17, 2015. The Problem: The driveshaft could separate from the rear differential because the securing nuts aren't tight enough. If this happens, the driveshaft could hit the gas tank, leading to a fuel leak. Injuries/Deaths: Subaru spokesperson Michael McHale confirms to Autoblog there are no reports of accidents, injuries, or fires. The fix: Subaru dealers will inspect the nuts and tighten or replace them as necessary. If you own one: Subaru expected the recall to begin on December 10, so owners should receive notification very soon. Related Video: RECALL Subject : Drive Shaft May Detach From Differential Report Receipt Date: NOV 24, 2015 NHTSA Campaign Number: 15V794000 Component(s): POWER TRAIN Potential Number of Units Affected: 3,251 All Products Associated with this Recall Vehicle Make Model Model Year(s) SUBARU LEGACY 2016 SUBARU OUTBACK 2016 Details Manufacturer: Subaru of America, Inc. SUMMARY: Subaru of America, Inc. (Subaru) is recalling certain model year 2016 Legacy vehicles manufactured October 24, 2015, to November 16, 2015, and Outback vehicles manufactured October 24, 2015, to November 17, 2015. Due to the improper tightening of the securing nuts, the drive shaft may separate from the rear differential. CONSEQUENCE: If the drive shaft detaches from the rear differential, it may strike the fuel tank and result in a fuel leak, increasing the risk of a fire. REMEDY: Subaru has notified owners, and dealers will inspect the fastening nuts, and tighten or replace them, as necessary, free of charge. The recall began on December 10, 2015. Owners may contact Subaru customer service at 1-856-488-8500. Subaru's number for this recall is WQV-57. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

2015 Subaru Outback offers more room and better econ behind that new face

While its new front fascia makes the biggest obvious impact, Subaru says changes to the entire 2015 Outback package make it roomier, more powerful, more efficient and quieter. The hexagonal grille gets it in line with the corporate template, to go along with a new shape to the lower grille and fog light cladding, a sharp crease for a shoulder line and a faster rake to the windshield. The rocker panel cladding and its 'toothed' molding remain, but it now also doubles as a step for when you want to place items on the roof rack.
Under the aluminum hood will either be a 2.5-liter, four-cylinder boxer engine with 175 horsepower and a carryover 174 pound-feet of torque, or a 3.6-liter inline-six-cylinder with 256 hp and 247 lb-ft exclusively in the 3.6R Limited model. Paired to the lower-friction Lineartronic CVT that is the only shifting choice, and aided by features like the active grille shutter system and electric power steering, Subaru estimates fuel economy for the four-cylinder at 25 miles per gallon city, 33 highway and 28 combined, an increase of 1/3/2 mpg over the outgoing car. The sixer is pegged at 19 city, 27 highway and 22 combined, an increase of 2 mpg across the board.
The Outback has grown in every dimension, but never by more than 0.7 of an inch. The passenger cabin grows by 2.7 cubic feet, though, so occupants have more shoulder, hip, elbow and legroom. The cargo hold is enlarged by 1.2 cu-ft with the rear seats up, by 2.0 cu-ft with them down and the load floor is flatter. Accessing it is made easier by the memory height function on the power tailgate and new release handles for the rear thrones. Cabin ambiance is improved by sound abatement measures like an acoustic windshield, thicker panels and more noise-insulating foam.