No Reserve Auction // Dealer Trade on 2040-cars

Auto blog

Toyota recalls power window switches for 6.5 million vehicles [UPDATE]

UPDATE: There was one incident of someone in the US getting a burn to the hand from this issue Toyota spokesperson Cindy Knight tells Autoblog that. "We have 11 reports where part of the door trim and/or switch was burnt," she said. The company isn't aware of any crashes from the problem, though. Because of a potential short circuit in the driver's side power window switch, Toyota is recalling 6.5 million vehicles worldwide, Reuters reports. Of those, the automaker says around 2 million are in the US. The affected models here are: 2007 and 2009 Camry and Camry Hybrid 2009-2011 Corolla 2008-2011 Highlander and Highlander Hybrid 2009-2011 Matrix 2006-2011 RAV4 2009-2011 Sequoia 2009-2011 Tundra 2006-2010 Yaris 2009-2011 Scion xB 2009-2010 Scion xD According to Toyota, the switch might not have received adequate lubricant grease during manufacturing, and over time this could lead to a short circuit. In a worst-case scenario, the part might even overheat, melt and cause a fire. As a fix, dealers will inspect the component on these vehicles and apply heat-resistant grease to it, and any broken examples will have an internal circuit board replaced. Toyota already issued one recall for this problem in 2012 when it had to repair 7.5 million vehicles globally from the 2007-2009 model years, including 2.5 million in the US. These latest models had the grease applied in a different way. Related Video: Toyota Recalls Certain Vehicles for Power Window Master Switch October 21, 2015 TORRANCE, Calif., Oct. 20, 2015 – Toyota Motor Sales, U.S.A., Inc. today announced that it is conducting a safety recall of approximately 2,000,000 vehicles related to the driver's side Power Window Master Switch. The involved vehicles include certain: 2007 and 2009 Camry and Camry Hybrid 2009-2011 Corolla 2008-2011 Highlander and Highlander Hybrid 2009-2011 Matrix 2006-2011 RAV4 2009-2011 Sequoia 2009-2011 Tundra 2006-2010 Yaris 2009-2011 Scion xB 2009-2010 Scion xD The Power Window Master Switch in the involved vehicles may have been manufactured with insufficient lubricant grease. If not enough grease is applied, under certain conditions the switch may develop a short circuit that can cause the switch assembly to overheat and melt. A melting switch can produce smoke and potentially lead to a fire. Toyota previously recalled certain 2007-2009 model year vehicles for a similar condition.

Toyota C-HR stays sharp from prototype to production

Scion is dead. While the troubled brand was given 13 years to make a case for itself, it never quite succeeded. And that's a shame, because we're pretty confident that this, the production-spec Toyota C-HR would have been one of its biggest hits. Instead, when it arrives in the US, it will be as a Toyota... where it will still likely be a big hit. The new small CUV made its debut after literally years of teasing concepts, the most recent of which was shown late last year in Los Angeles, where it was badged as a Scion. After seeing that car, it's quite clear that Toyota has strained itself to translate its style to the real world. Up front, there's clear inspiration from the Toyota Auris/Scion iM. But aside from the front, the C-HR's biggest inspiration appears to be the Nissan Juke. View 14 Photos It's like Toyota has tried to go even further, though. Its wheel arches are flared even more aggressively and they feed into a strong character line on the lower portion of the doors. In back, Toyota's designers seem to have just rotated the Juke's taillights 180 degrees while they sit below an extremely fast rear window. Said window is integrated into today's latest design trend, a floating roof. Mechanically, the C-HR rides atop Toyota's New Global Architecture, which is Japan's answer to Volkswagen's MQB architecture. Power comes from a hybrid drivetrain, good for a relaxed 120 horsepower. If you don't want hybrid power, Toyota will sell the C-HR with the Euro-market Auris' turbo 1.2-liter engine, but we almost certainly won't see that here in the US. Instead, American drivers will probably be left with nothing but a 2.0-liter, naturally aspirated four-cylinder. That engine will be exclusively paired with a continuously variable transmission that sends power to either the front- or to all four wheels. So there's Juke inspiration, but not in the driving character. Toyota says it will build the C-HR Hybrid in Turkey. We don't know if that facility will handle US-market vehicles or just Europe, but we wouldn't be surprised to see additional facilities come online to produce this stylish little bugger. Related Video: TOYOTA C-HR Toyota's Fresh New Take on the Crossover 2016 Toyota Motorshow Geneva Making its world debut at the 2016 Geneva motor show, the C-HR gives Toyota a powerful new presence in the crossover market.

Production Toyota C-HR to debut in Geneva, has hybrid engine

Toyota now officially confirms earlier reports that the C-HR crossover concept (above) will debut at the Geneva Motor Show in March. The CUV will also be available a European-made hybrid powertrain, but the company won't yet say whether that will be the only engine option. "We are entering the C-segment crossover market with a fantastic product and with a hybrid powertrain from the start," Johan van Zyl, Toyota Motor Europe president and CEO, said. At least for Europe, the company will build the production C-HR at its factory in Turkey. The automaker originally planned the C-HR for the US as a Scion model and even displayed the concept that way at the 2015 Los Angeles Auto Show. However, the brand's demise means the crossover now gets to be a full Toyota product here. The five-door CUV rides on the Toyota New Global Architecture, but test vehicles keep the production version's styling hidden under heavy camouflage. The final vehicle reportedly looks like the concept, though. On this side of the pond, the C-HR will compete against compact crossovers like the Honda HR-V and Jeep Renegade. View 13 Photos Related Video: Toyota Motor Europe confirms European production for future crossover based on C-HR concept Future crossover to be built at Toyota Motor Manufacturing Turkey alongside Corolla, Verso New generation hybrid engine to be manufactured at Toyota Motor Manufacturing, UK in Deeside, Wales Brussels, Belgium - Ahead of the presentation of the highly anticipated production version of the C-HR concept at the Geneva Motor Show in early March, Toyota Motor Europe (TME) shared today its production plans for the model in Europe. The vehicle will be built at Toyota Motor Manufacturing, Turkey (TMMT) in Sakarya, Turkey, in what marks the first time a hybrid-powered vehicle will be produced in the country. This will be TME's third plant to produce hybrid vehicles in the Europe region, after Toyota Motor Manufacturing UK in Burnaston, Derbyshire (Auris Hybrid and Auris Touring Sport Hybrid) and Toyota Motor Manufacturing France (Yaris Hybrid). TME also announced that the hybrid engine for the crossover is to be produced at Toyota Motor Manufacturing UK's engine plant in Deeside, Wales. The production destination for the vehicles will be greater Europe and regions outside Europe. Individual export countries are being considered at this time.