2021 Ram 3500 Big Horn on 2040-cars

Auto blog

Fiat Chrysler to recall 100,000 Ram ProMaster vans over engine fire risk

Fiat Chrysler is recalling nearly 100,000 Ram ProMaster vans sold in the U.S. to address an overheating issue in fan motors. The recall is limited to vans from the 2015 through 2018 model years equipped with air conditioning. The recall affects ProMaster vans equipped with 3.0-liter diesel or 3.6-liter gasoline engines. FCA says the engine cooling fans may seize up and the circuit breaker may not protect them from overheating, presenting a heightened risk of fire. That’s despite a warning-light illumination in the vans. FCA first opened an investigation in July after the U.S. Postal Service reported incidents where the engine compartment caught fire. It says it is not aware of any injuries related to the issue despite 21 complaints of smoke or fire and 13 reports from dealers. A remedy is still under development. The recall is estimated to launch in the first quarter of 2020. Separately, FCA says itÂ’s recalling an estimated 51,788 Fiat 500 compact cars from 2012 and 2013 in the U.S. to replace faulty shift-cable bushings that may degrade over time from exposure to heat and humidity. That could cause the shift cable to separate from the transmission linkage, making the shifter inoperable. The company says itÂ’s aware of three minor accidents that could be related to the issue, but no potentially related injuries. Affected customers may notice looser shifter movement, although the instrument cluster will always indicate the correct gear selected. Service will be provided free of charge, and customers will be notified. Owners with questions can also call 800-853-1403. The Fiat 500 recall also affects an estimated 10,627 models in Canada, 3,520 in Mexico and 6,826 outside North America.

2019 Ram 1500 pickup production problems costing FCA $300M to fix

Fiat Chrysler is spending more than $300 million to fix production issues with the new 2019 Ram 1500 pickup as the plant where it's built is running below capacity and suppliers reportedly struggle to keep up with building it and the 2018 version simultaneously. The truck's ramp-up is well behind schedule, Automotive News reports. FCA's Sterling Heights Assembly plant in Michigan began building the pickup in mid-January but is running at only 60 percent capacity, CEO Sergio Marchionne said on an earnings call last week. Sources told the publication the plant is still undergoing construction and was building about 1,000 trucks per day toward a run rate of 1,400 per day. It's operating two 10-hour shifts per day, seven days a week, with plans to keep the factory running every weekend and holiday through Labor Day to meet production targets. More than 2,500 of the new pickups were reportedly awaiting unspecified electrical repairs before they could be shipped. FCA could use the boost from the heralded new 2019 Ram 1500, which figures prominently in its aggressive annual financial goals. The company is relying on the previous-generation 2018 Ram 1500, demand for which has been sagging. First-quarter sales of the pickup are down almost 13 percent year over year to 103,964, according to carsalesbase.com figures. Meanwhile, sales of Ford's F-Series pickups over the same period rose 4 percent to 214,191, while Chevrolet Silverado sales have climbed 5 percent to 135,545. Dealers have started receiving deliveries of the 2019 Ram 1500, but only the version fitted with the 5.7-liter V8. The EPA has yet to issue fuel economy ratings for the standard 3.6-liter Pentastar V6 paired with the eTorque 48-volt mild hybrid system, nor the same system mated with the V8. As we noted in our recent First Drive review, upgrading to the (non-hybrid) V8 costs $1,195, which is actually $255 cheaper than before. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Image Credit: FCA Plants/Manufacturing RAM Truck sales

Fiat Chrysler dumped 40,000 unordered vehicles on dealers

In a move that echoes recent history, Fiat Chrysler has been making more cars and trucks than dealers in the U.S. are willing to accept, with Bloomberg reporting that at one point the automaker had built up a glut of around 40,000 unordered vehicles. That’s led some dealers to accuse FCA of reviving the dreaded “sales bank” accounting practice of obscuring inventory to improve the balance sheet. The company reportedly began building up its inventory of unordered cars this summer despite an industrywide slowdown in sales and an eagerness by some dealers to thin their inventories because rising interest rates are making it more expensive to hold unsold cars. The inventory build-up also coincided with Fiat ChryslerÂ’s efforts to find a merger partner, first with Renault, which fell through, then last monthÂ’s announcement that it will merge with FranceÂ’s PSA Group. FCA denies any such scheme and tells Bloomberg the rising inventory is down to a new predictive analytics system designed to better square supply with demand from dealers that is helping the company save money and narrow the numbers of unsold vehicles. The company recently agreed to pay a $40 million civil penalty to the U.S. Securities and Exchange Commission to settle a complaint that it paid dealers to report fake sales figures over a span of five years. While no one is suggesting that FCA is in dire financial straits — the company saw higher than expected earnings in the third quarter and record profits in North America — the practice has strong historical precedent by Chrysler, which built up bloated inventories in the run-up to its two federal bailouts, in 1980 and 2009. It was also common at GM and Ford during the 2000s, when all three Detroit automakers struggled with excess manufacturing capacity and plummeting sales in the lead-up to the Great Recession. Back in 2012, CFO Magazine wrote about a report that explained automakersÂ’ rationale for the practice and how it works: Say fixed costs for a given factory are $100, and that the factory can make 50 cars. Consumers, however, demand only 10. Under absorption costing, if the company makes all 50 cars, its cost-per-car is $2. If it makes only up to demand, or 10 cars, the cost-per-car is $10. Although each car adds variable costs for steel and other parts, if those costs are low, the company still has an incentive to make more cars to keep the cost-per-car down.