2014 Tradesman New Turbo 6.7l I6 24v Automatic 4wd on 2040-cars

Auto blog

Ram goes all-in on SAE J2807 tow ratings [w/video]

Thanks to the Society of Automotive Engineers (SAE), when car shoppers look at horsepower and torque figures on vehicles, they know that all the automakers are calculating them the same way. However, that isn't the case when it comes to truck buyers and max towing capacity ratings because each company figures the value differently. That practice finally changes with the SAE's standardized J2807 system, though, and Ram Truck is the first one to apply the new test procedure to its entire light- and heavy-duty pickup range.
All models of the Ram 1500, 2500 and 3500 use the new, standardized rating for the 2015 model year, but buyers might not notice too much difference. According to the company, in 99 percent of cases the max towing weights are unchanged or even improve slightly from last year. That's a strong result compared to the 2015 Chevrolet Silverado and GMC Sierra that are seeing few increases but mostly decreases under the new testing procedure.
"For too long, an uneven playing field existed and towing capacities went unchecked. We're happy to be the only pickup truck manufacturer to align with the SAE J2807 towing standard across our pickup truck lineup," said Mike Cairns, director of Ram Truck engineering, in the company's announcement of the new specs.

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric

2019 Ram 1500 prices released: What pickup will cost, by trim

One of the final pieces of information about the 2019 Ram 1500, and one of the most important, is finally here: the price. A base model Ram Tradesman, which nets a V6, the smaller four-door cab, a 6-foot 4-inch bed and two-wheel drive, starts at $33,340 with destination charge. That's a a bit over $1,000 more than the cost of the same outgoing Ram 1500 Tradesman. But you'll also get new features such as the eTorque mild-hybrid system and a touch-screen infotainment system with Uconnect. At the other end of the spectrum, the top-rung Ram 1500 Limited Crew Cab 4X4 V8 now starts at $59,035, an increase of almost $4,400 over the old model. Although the base price of the most basic and the most opulent Ram 1500s have gone up, some other things have become cheaper. You won't have to pay as much to upgrade to a V8, for instance. The plain 5.7-liter V8 with its 395 horsepower is $255 cheaper now, costing $1,195. To get that engine with the eTorque system costs more at $1,995. The RamBox bed-side storage bins are $300 cheaper now at $995. The Rebel trim has a better entry-level price, too. The base version with the smaller cab, four-wheel drive (the only drivetrain available with the small cab) and V6 with eTorque starts at $46,340. That just slips under the $46,690 price of the outgoing base Rebel with two-wheel-drive, and is over $2,000 less than the old Rebel with four-wheel drive that started at $48,790. Of course, the outgoing model was only available with the larger "Crew Cab" four-door body. Adding that larger body to the new Rebel will probably offset the cost savings. Here's the entire 2019 Ram sheet of base prices by trim/configuration: Related Video: