2012 Ram 3500 Laramie Truck on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

FCA recalling Ram trucks for steering wheel and brake pedal issues

WASHINGTON — Fiat Chrysler Automobiles said this week it would recall 882,000 pickup trucks worldwide in two new recalls to address steering and pedal issues. The Italian-American automaker said it was recalling about 660,000 heavy duty Ram 2500 and 3500 pickup trucks from the 2013 through 2017 model years, including 574,000 in the United States, as drivers could potentially experience steering loss. A nut could come loose and prevent drivers from being able to steer the vehicle, Fiat Chrysler said, adding it had reports of one injury and eight accidents possibly related to the issue. The company will also recall 222,000 2019 Ram 1500 pickup trucks worldwide to better secure brake pedals while the vehicles' adjustable-pedal feature is in use. The brake pedal could get detached if drivers move pedals to the rear-most position, the company said. That could be dangerous if trucks are traveling at highway speeds. Last month, Fiat Chrysler recalled about 180,000 2019 Ram 1500 pickups to tighten a fastener linked to reports of power-steering loss. Fiat Chrysler said the issue could lead to steering problems.

Chrysler recalling over 280k minivans because airbags may deploy on wrong side

Chrysler has issued a recall for some 2013 Town & Country, Dodge Grand Caravan and Ram C/V Tradesman vans built between May 10, 2012 and June 7, 2013. These vehicles may have a software error that would cause the wrong side (opposite side) airbags to deploy in a crash. With this defect, a left-side impact would cause the right-side airbag to deploy, etc.
The recall affects 281,500 vehicles in total: 224k in the US, 49,300 in Canada, 2,900 in Mexico and 5,300 in other locations. Chrysler will notify owners of effected vehicles, and reflash the offending occupant restraint control module to resolve the issue. Scroll down to read the National Highway Traffic Safety Administration press release.