2012 Dodge Ram 3500 4x4 Dually Mega Cab Longhorn 6.7l Turbo Diesel Navigation on 2040-cars

Auto blog

2014 Promaster looks like a Fiat, hauls like a Ram

A new day is dawning, folks. The old-guard vans of our youth are being replaced with a new flock of European-inspired commercial vehicles from the likes of Ford, Nissan (Renault) and Mercedes-Benz. Here in Chicago, Ram pulled the covers off its entry into the reborn commercial van market with the 2014 Promaster, based on the well-known European Fiat Ducato.
Ram makes no bones about the Promaster's Fiat underpinnings, though the company claims it has beefed up the machine for US roads and uses with a re-engineered chassis, a more robust suspension setup, improved brakes (from Brembo), additional corrosion protection, improved climate control and additional safety systems.
Power comes from one of two powerplants options, one gas and one diesel. First up is Chrysler's well-known 3.6-liter Pentastar V6 rated at 280 horsepower and 260 pound-feet of torque mated to a six-speed automatic transmission. For a bit more pulling power and durability, Ram is offering a new 3.0-liter four-cylinder diesel engine pumping out 174 hp and, more importantly, 295 lb-ft of torque at just 1,400 rpm. That engine sends its torquey goodness through a six-speed electronically controlled automated manual gearbox.

Ram wants its midsize truck situation 'fixed soon'

The rumors of a midsize Ram pickup are like a metronome — sometimes in motion, sometimes dead. This week the rumor is alive, so reports Automotive News. Fiat Chrysler CEO Mike Manley admitted during an earnings call that the lack of a mid-sizer is "a clear hole in our portfolio," and that the Ram product development team is "focused on it." Puzzling that out means finding "a cost-effective platform in a region where we can build it with low cost and it still being applicable in the market." But he wants a solution found soon. During the product roadmap presentation FCA made in June last year, late CEO Sergio Marchionne said the middling pickup would be built in Mexico. That tidbit came after years of Marchionne saying the brand would get in the segment, only to have the idea shot down by Ram bosses. At the 2012 Detroit Auto Show, a year after the midsize Dodge Dakota went off the market, Marchionne said the brand would reinstate a new-generation Dakota, with a better-than-50% chance it would be unibody. In 2013, then-Ram president Reid Bigland said the chances were tiny because the numbers didn't add up. The two men got on the same page, in favor of, in 2014. In March 2016, Marchionne said, "I like that space a lot," and "It's a good space to be in." Exactly one month later, then-Ram CEO Bog Hegbloom said the idea was dead because he couldn't make a business case for it. Come early 2018, even Marchionne had joined the naysayers. He told Automobile, "We did not think it was necessary to re-enter that market after our last experience." The snag was, and remains, that a smaller truck has "a cost structure very similar to our Ram 1500. We have not found an economic way to get this done." Four months later, there's a midsize pickup on the product roadmap. Then, at this year's New York Auto Show, Ram Trucks boss Jim Morrison told us Ram had no plans yet for a smaller pickup, although the division continues to look at its options. Last September an Automotive News report forecast the truck to be built in Toledo alongside the Jeep Wrangler and Gladiator pickup. When Car and Driver asked for clarification about Toledo or Mexico, FCA pointed to Marchionne's comments referring to Mexico. It appears that's the angle Manley and his team are still trying to make work. The Saltillo, Mexico, assembly plant now builds Ram's heavy-duty trucks, but observers expect HD production to move to the U.S. to make room for the smaller pickup.

FCA recalls Ram dualie chassis cabs to recalibrate top speed

If you're one of the 1,771 owners of a 2014-15 Ram 4500 or 5500 chassis cab with a 6.4-liter Hemi V8 and a dualie rear axle, you may be hearing soon from Fiat Chrysler Automobiles to bring your truck in to your local dealer. The reason, you ask? To have the speed limiter recalibrated. The problem, according to the statement below, is that while some of these trucks are electronically limited to 106 miles per hour, their tires can't safely maintain that speed. As a result, FCA is having dealers recalibrate the limiter to 87 mph. Of course, that's still well above the speed limit in most places, and "FCA believes it is unlikely that these trucks are operated at such speeds," but that it "is acting out of an abundance of caution." In addition to the 1,771 units in the United States, the company is recalling another 169 in Canada. In an unrelated campaign, FCA is also recalling a handful or two of 2015 Dodge Challengers – 72 in the US, six in Canada and three in Mexico – to secure a side-curtain airbag bolt that may have been improperly installed during assembly over the course of a ten-day period. In both cases, FCA says it is unaware of any complaints, accidents or injuries related to these issues. Statement: Speed Recalibration May 15, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 1,771 trucks in the U.S. to recalibrate their maximum speed. The dual-wheel trucks are currently restricted to a top speed of 106 miles per hour (mph), but an internal specification review revealed top speed should be set at 87 mph, in accordance with their factory-equipped tires. The Company is unaware of any related injuries, accidents or customer complaints. Dealers will recalibrate vehicle speed accordingly. While FCA believes it is unlikely that these trucks are operated at such speeds, and that doing so would exceed posted speed limits in nearly every applicable jurisdiction, the Company is acting out of an abundance of caution. The campaign is limited to certain model-year 2014-15 Ram 4500/5500 Chassis Cabs equipped with 6.4-liter HEMI V-8 engines. An additional 169 vehicles are believed to be in Canada. Affected customers will be advised when they may schedule service. Customers with questions may call the FCA US Customer Information Center at 1-800-853-1403. ### Statement: Bolt May 15, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 72 cars in the U.S.