2024 Ram 2500 Tradesman on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Chevy, GMC and Ram dealers are worried they'll run out of new pickups

One of the unexpected side effects of the ongoing coronavirus pandemic is a shortage of pickups at Chevrolet, GMC and Ram dealers. Supplies are running out, and the factories that build these trucks remain closed. Stores across the nation began increasing incentives in March, when the first stay-at-home orders were issued, in a bid to continue luring buyers into showrooms. They also launched online sales channels, or expanded their existing digital business. Sales nonetheless plummeted in April 2020, but in-demand vehicles, like the Ram 1500 and the Chevrolet Silverado, are still selling relatively well thanks in part to the aforementioned incentives. Pickups outsold sedans for the first time in April 2020, according to The Detroit News, by 17,000 units. The problem is that General Motors, Fiat Chrysler Automobiles (FCA), and Ford temporarily closed their factories in March. "The pipeline is very dry," said Mike Maroone, the CEO of a large dealership group named Maroone USA, in an interview with Automotive News. He told the publication his Chevrolet stores are sitting on a 30-day supply of the Silverado, which is one of America's best-selling vehicles. "That is a problem for us," he concluded. Coronavirus-related lockdowns and factory closures compound problems already faced by dealerships who represent General Motors-owned brands. They entered 2020 with a thinner inventory than a year earlier due to the 40-day United Auto Workers (UAW) strike that paralyzed the company late in 2019, and the 0%, 84-month offers announced in March have sapped supply. Ram wasn't affected by a strike, but it has relied heavily on generous incentives to move trucks off lots. Ford, on the other hand, limited incentives to 2019 models. Inventory levels differ greatly from region to region. The national average for the Silverado stood at an 82-day supply in March 2020, down from 120 in March 2019. Ram stores had a 114-day supply of the 1500 (compared to 134 a year earlier), while Ford bucked that trend with a 111-day supply versus 84 in 2019. Don't panic if you're in the market for a truck; we're not facing a complete drought. Automotive News added that America's light-duty pickup inventory could fall to 400,000 units by the end of May, and drop further to 260,000 units in June. For context, there were about 700,000 light-duty trucks in stock in May and June of 2019. That's unquestionably a sharp drop, but there will still be over a quarter of a million trucks to choose from.

Ram and Jeep Wrangler drive Fiat Chrysler profits up 61 percent

MILAN — Italian American automaker Fiat Chrysler says fourth-quarter net profits rose by 61 percent, powered by North American sales of the all-new Ram 1500 and Jeep Wrangler. Fiat Chrysler Automobiles on Thursday reported quarterly net profits of 1.29 billion euros ($1.46 billion), compared with 804 million euros in 2017. Revenues rose 6 percent to 30.6 billion euros. North America profits grew by 19 percent to 6.2 billion euros, accounting for the lion's share of the automaker's global profits. The carmaker continued to have trouble in Asia, which swung to a loss due to market weakness in China and more competition in Fiat Chrysler's core SUV market. Europe also lost ground, with profits dipping 44 percent on lower shipments and weaker pricing, while Latin America more than doubled. Based on the company's earnings last year, 44,000 unionized U.S. auto workers will get $6,000 profit-sharing checks. That's $500 more than in 2017, but smaller than U.S. rivals Ford and General Motors. On Wednesday, GM announced that workers would get $10,750, while Ford workers will get $7,600.Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.