2024 Ram 2500 Big Horn on 2040-cars

Auto blog

2019 Ram 3500 Regular Cab Big Horn Review | No B.S., just lots of truck

While luxury trucks of all sizes from all makes are growing in popularity, they are particularly prevalent in the heavy-duty segment, where they tow toys worth far more than the truck itself. Want proof? The volume-selling GMC Sierra HD is actually its most expensive version: the Denali, slathered with leather and chock full of convenience features. But the person who buys this 2019 Ram 3500 4x4 Big Horn Regular Cab would say they don't care about any of that crap. This is a dedicated tool for towing and especially hauling — even more dedicated than the Ram 2500 HD that was also overhauled for 2019. It has a regular cab with a three-person bench and no back seat. It has the longest bed available at 8 feet with the heftiest payload. Packing a standard 6.4-liter 410-horsepower Hemi V8, it can tow as much as 17,490 pounds. The 3500 is also the only Ram pickup that doesn't have a coil spring rear suspension. The five-link setup with coils in the 1500 and 2500 are abundantly strong for their respective segments, while providing superior ride and handling to boot, but when you enter 3500 territory, the old-fashioned leaf spring is still required (an auto-leveling rear air suspension that still utilizes the leaf springs is optional, but our truck was not so-equipped). Remember this when you're choosing between 2500 and 3500 trucks, because if you don't need the 3500's extra capability (more on that later), you're going to be suffering when the bed isn't loaded or the tongue isn't attached to something humongous. The ride is quite simply appalling, crashing over bumps and launching you from your seat into the shoulder belt. The 2500's is far superior. But of course, anyone who has ever driven a "1-ton" pickup would find such a comment charming. "No kidding," they'd likely say, "tell us something we don't know." Well, it probably wouldn't be that the ride settled down substantially when I loaded it with a relatively paltry amount of weight. The 500 pounds of mulch I dropped into the bed was quite obviously a light lift for a truck with a 4,660-pound payload, but I can't dump river rock into every truck I test. I also didn't have a 17,000-pound something around to tow. I hereby apologize. Yet, the point of this heaviest-duty regular-cab pickup was still made. If you owned a number of different vehicles or needed something to keep on a ranch for working purposes only, this is exactly the type of truck to keep on hand.

Ram 1500 custom trucks for SEMA go high and low

For SEMA, Mopar only created two in-house custom 2019 Ram 1500 trucks, and they're fairly mild in terms of modifications, many of which are existing Mopar accessories. But at the very least they show two extremely different ways to upgrade a Ram, with one being an off-road-oriented Ram Rebel, and the other being a lowered, street-oriented truck. The latter mod has become a bit unusual in a world dominated by Raptors and ZR2s. We'll start by talking about the street truck, which is the only one of the two with its own unique name: Low Down. Its defining characteristic: It sits two inches lower than a standard Ram 1500. This was done with a concept lowering kit that Mopar does not offer. Another part not yet available is the hood, which features an aggressive scoop. Finally, inside are some concept aluminum pedals. There aren't plans for any of these to come to production yet, but you can be sure Mopar will be paying attention to the public's reaction, and if things go well, they could show up at a dealer near you. The other defining feature of the Low Down is its paint scheme, which is black over silver, with a stripe separating them painted in the same Brass Monkey bronze hue available on some of FCA's wheels. The factory Ram wheels also get a custom paint scheme. Aside from the special parts and custom paint, almost everything else is right out of the Mopar catalog, including the fender flares, bed cover, spray-in bedliner, 5-inch exhaust tips and cold-air intake. The Mopar-customized Ram Rebel doesn't get a fancy name, but it still gets plenty of tweaks. It uses the factory Ram lift kit, so it sits two inches higher than a stock Rebel. It also features 35-inch tires. Up front, there's the concept hood found on the Low Down. At the back of the bed, there's a new flashy matte black decal that will be available for Ram Rebels in the near future. The bed also has an available "Rambar" sport bar, with some Mopar auxiliary lights. The bed has a spray-in bedliner and a concept spare tire carrier. Out the back are the same 5-inch exhaust tips as on the Low Down. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

FCA recalling Ram trucks for steering wheel and brake pedal issues

WASHINGTON — Fiat Chrysler Automobiles said this week it would recall 882,000 pickup trucks worldwide in two new recalls to address steering and pedal issues. The Italian-American automaker said it was recalling about 660,000 heavy duty Ram 2500 and 3500 pickup trucks from the 2013 through 2017 model years, including 574,000 in the United States, as drivers could potentially experience steering loss. A nut could come loose and prevent drivers from being able to steer the vehicle, Fiat Chrysler said, adding it had reports of one injury and eight accidents possibly related to the issue. The company will also recall 222,000 2019 Ram 1500 pickup trucks worldwide to better secure brake pedals while the vehicles' adjustable-pedal feature is in use. The brake pedal could get detached if drivers move pedals to the rear-most position, the company said. That could be dangerous if trucks are traveling at highway speeds. Last month, Fiat Chrysler recalled about 180,000 2019 Ram 1500 pickups to tighten a fastener linked to reports of power-steering loss. Fiat Chrysler said the issue could lead to steering problems.