2022 Ram 2500 Laramie Crew Cab 4x4 6'4" Box on 2040-cars

Auto blog

Three Ram recalls affect more than a million pickups

Millions of Ram pickups across many of its model lines in the US are in need of recall repairs due to three campaigns by the truck maker. The largest of this trio covers 1.06 million examples in the US of the 2012-2014 Ram 1500, 2500, 3500, and chassis cab versions of the 3500, 4500, and 5500 because of potential inadvertent driver-side airbag deployment. In addition to those affected here, there are 235,925 in Canada, 26,543 in Mexico, and 23,635 elsewhere. There are also two related injures from this problem, but no reports of accidents, according to the company. While the recall was mysteriously ignored in the media at the time, the National Highway Traffic Safety Administration announced details of this campaign in late July. The next largest among the three covers 188,000 examples of the 2014 and 2015 Ram 1500 Quad Cab in the US because their side-curtain airbags don't fully overlap the C-pillars when deployed, which is in violation of federal rules. Conceivably, rear passengers not wearing their seatbelt could be more likely to be ejected in a crash. Ram's repair for the issue is still being developed, according to the National Highway Traffic Safety Administration, but the company advises all occupants to be buckled in. The final campaign affects 156,498 the company's heavy-duty trucks in the US, including the 2013 Ram 3500 and 2014 Ram 2500, 3500, and 3500 Chassis Cab. In addition, there are 20,603 in Canada and 3,241 elsewhere. Of the 13,236 in Mexico, a few units of the 2014 Ram 1500 exclusive to that market are also covered. The company found that the welds for some steering parts might have "insufficient fusion." If the part breaks, then vehicles are still controllable but with diminished response. There are no reported injuries but one minor accident. The fix involves installing a reinforcement bracket. Related Video: Statement: Steering-wheel Wiring Harness September 10, 2015 , Auburn Hills, Mich. - FCA US LLC is conducting a voluntary safety recall to inspect and service, as required, wiring harnesses in an estimated 1.06 million U.S.-market trucks. Investigation by FCA US discovered certain trucks may have steering-wheel wiring harnesses that wear because of contact with a spring. Such wear may cause a short-circuit that may lead to inadvertent driver-side air-bag deployment. The Company is aware of two related injuries, but no accidents.

2019 Ram HD Chassis Cab trucks: tough on the outside, comfy on the inside

The past year or so has been big for Ram. FCA's truck division went from having some of the most dated (though still solid) pickups on the market to introducing the 2019 Ram 1500, arguably the new segment leader. A year later, at the 2019 Detroit Auto Show, FCA revealed the new Ram Heavy Duty. Yesterday, Ram announced the 1500 was getting a trick tailgate to compete with the power tailgate on the Chevy Silverado and MultiPro tailgate on the GMC Sierra. Today, at the 2019 Chicago Auto Show, FCA will present the new Ram 4500 and 5500 chassis cab models. Like the Ram 2500 and 3500, the new chassis cab trucks appear to share a lot with the current crop of Ram HD trucks. The cab itself appears to be unchanged from the outside, though the front fascia has been updated to reflect Ram's current design. As with most things, it's what's inside that counts. The chassis cab models get the fantastic interior from the 2019 Ram 1500. It's a handsome and well-appointed cabin. Even base Tradesman models benefit from the new design and packaging. There's new tech, too. The 12-inch infotainment screen is nice to look at, but customers are likely to enjoy features like adaptive cruise control, forward collision warning and automatic emergency braking (with trailer brakes). The safety tech is available on all trim levels. The trucks also pack parking assist and a 270-degree camera view. There are also camera features to help hook up trailers (including fifth-wheel goosenecks). The Ram Chassis Cab 3500, 4500 and 5500 represent Class 3, 4 and 5 GVW ratings. As such they pack some punch under the hood. The standard engine is the 6.4-liter Hemi V8 making 410 horsepower and 429 pound-feet of torque, though 4500 and 5500 models only make 370 horsepower. The Ram 3500 features cylinder deactivation to improve fuel economy. The three trucks are available with a 6.7-liter Cummins turbo-diesel inline-six. The engine makes 360 horsepower and 800 pound-feet of torque. An Aisin six-speed auto is available on V8 models and standard with the diesel. Both engines are available with dual alternators. The trucks are available in four industry-standard frame lengths measured in inches from the cab to the rear axle: 60, 84, 108 and 120. Upgraded brakes should shorten stopping distances and improve pedal feel. Thanks to high-strength steel and aluminum, the truck should weigh about 120 pounds less than before.

Stellantis reports surprising 2020 results, is 'off to a flying start'

MILAN — Low global car inventories and cost cuts should boost Stellantis's profit margins this year, though a shortage of semiconductors and investments in electric vehicles could weigh on results, the newly-formed automaker said on Wednesday. The forecast came as Stellantis, created by the January merger of Peugeot-maker PSA and Fiat Chrysler (FCA), reported better-than-expected results for 2020 that sent its shares up around 3% in morning trading. "Stellantis gets off to a flying start and is fully focused on achieving the full promised synergies (from the merger)," Chief Executive Carlos Tavares said in a statement. Stellantis is the world's fourth largest carmaker, with 14 brands including Fiat, Peugeot, Opel, Jeep, Ram and Maserati. It said 2021 results should be helped by three new high-margin Jeep vehicles in North America and a strong pricing environment there. The U.S. market has driven profits for years at FCA and starts off as the strongest part of Stellantis. The group's guidance assumes no more significant lockdowns caused by the global COVID-19 pandemic, which shuttered auto plants around the world last spring. Stellantis should also get a lift as its starts to implement a plan aimed at delivering over 5 billion euros a year in savings, without closing any plants. Tavares has also pledged not to cut jobs. But a pandemic-related global shortage of semiconductors, used for everything from maximizing engine fuel economy to driver-assistance features, could hurt business. Auto industry executives have said the shortage should ease by the second half of 2021. Stellantis said its "electrification offensive" could also weigh on results this year. Automakers are racing to develop electric vehicles to meet tighter CO2 emissions targets in Europe and this week Volvo joined a growing number of carmakers aiming for a fully-electric line-up by 2030. Stellantis plans to have fully-electric or hybrid versions of all of its vehicles available in Europe by 2025, broadly in line with plans at top rivals such as Volkswagen and Renault-Nissan, although Stellantis has further to go to meet that goal. The carmaker is targeting an adjusted operating profit margin of 5.5%-7.5% this year. That compares with a 5.3% aggregated margin last year: 4.3% at FCA and 7.1% at PSA excluding a controlling stake in parts maker Faurecia, which is set to be spun-off from Stellantis shortly.