2022 Ram 2500 Free Delivery! Tradesman 4x4 Diesel Flat Bed Keyle on 2040-cars

Auto blog

EPA suspected Fiat Chrysler of using 'defeat device' in 2015

U.S. regulators told Fiat Chrysler Automobiles in November 2015 that they suspected some of the automaker's vehicles were equipped with secret software allowing them to violate emission control standards, according to emails disclosed on Friday. The U.S. Environmental Protection Agency and California Air Resources Board accused Fiat Chrysler in January of using the software, known as a "defeat device," to illegally allow excess diesel emissions in 104,000 Jeep Grand Cherokees and Dodge Ram 1500 trucks built between 2014 and 2016. Byron Bunker, director of the EPA's Transportation and Air Quality compliance division, said in a January 2016 email to Fiat Chrysler, obtained by Reuters under the Freedom of Information Act, that he was "very concerned about the unacceptably slow pace" of the automaker's efforts to explain high nitrogen oxide emissions from some of its vehicles. Nitrogen oxide is linked to smog formation and respiratory problems. Bunker's email said the EPA had told Fiat Chrysler officials at a November 2015 meeting that at least one auxiliary emissions control device on the car maker's vehicles appeared to violate the agency's regulations. Mike Dahl, head of vehicle safety and regulatory compliance for Fiat Chrysler's U.S. unit, responded in a separate email that the company was working diligently and understood the EPA's concerns. He added that if the EPA identified Fiat Chrysler vehicles as containing defeat devices it would result in "potentially significant regulatory and commercial consequences." The documents redacted the vehicles named, but two officials briefed on the matter said they referred to diesel models. The EPA's November 2015 meeting with Fiat Chrysler came two months after Volkswagen AG, mired in a major tailpipe emissions scandal, admitted to installing secret defeat device software in hundreds of thousands of U.S. diesel cars to make them appear cleaner than they were on the road.

Discerning Ram owners can now match their truck to their RV

Are you frustrated that the two-tone paint on your new pickup truck doesn't match the RV that it's hauling? We have good news for you. Today, at the Dallas Auto Show, Ram unveiled a new color for the 2017 Laramie Longhorn: the imaginatively named RV Match Brown. In Ram's words, the "Luxurious two-tone premium model displays distinctive design cues" and is "designed to match or complement RV trailer graphics." The new color replaces White Gold in the two-tone lineup and is only available on the Laramie Longhorn trim. In addition to running the bottom length of the truck, the RC Match Brown paint covers the side steps and the spokes on the 20-inch aluminum wheels. All 1500 Laramie Longhorns come with 20-inch wheels, while the 2500 and single-wheel 3500 models come with 18s as standard and offer optional 20s. The color wasn't designed to replicate one specific color, just that general shade of brown that seems to be ubiquitous in the RV industry. The RV Match Brown is available with nine exterior colors. The Laramie Longhorn is the second highest trim level of the Ram 1500, slotting just below the Ram Limited. Features include items like laser-etched leather with complimenting walnut burl inserts. It's no Rolls Royce, but it's hard to find a more decked-out truck on the market. Related Video:

2019 Ram 1500 eTorque First Drive Review | The un-hybrids

Misinformation is already being passed around about the 2019 Ram 1500 eTorque – reports calling the new electrified version of the full-size half-ton pickup truck a hybrid and saying its eTorque system adds torque to the truck's engine increasing payload, towing capacity, and performance. Don't believe a word of it – this isn't a hybrid in the conventional sense of the word. eTorque does not increase the truck's power or capability. Instead, the system feeds in some electric torque at low RPM, which helps with fuel efficiency by spinning up the engine during start/stop operation, smoothing gearchanges, and harvesting some energy from braking – that's basically it. Ram is partially to blame for the hybrid confusion. Although the "h"-word does not appear anywhere on the truck or the vehicle's window sticker, the automaker has chosen to call eTorque a "mild-hybrid system", which implies that it might be able to propel the truck on electric power. But the Ram's small battery pack and single electric motor cannot – it's more similar to the original GM Parallel Hybrid Truck system than the later two-motor, two-mode hybrid system circa 2009. Also, eTorque applies power to the engine and the wheels briefly at very low engine speeds and during gear changes. These applications of power only last for fractions of a second at any given time, some as quick as the blink of an eye. So it's a labeling fiasco, but Ram's explanation of the eTorque system's operation and its benefits, which are significant, can also be perplexing. And the resulting discombobulation is unfortunate, because eTorque is clever, and it really does work. Earlier this week we drove two Rams with the system, one a V6 and one a Hemi, through Kentucky horse country, and came away impressed by its measurable contributions to the truck's fuel efficiency, drivability and smooth operation. We also interviewed Mike Raymond, the Chief Engineer on the Ram 1500, and Brian Spohn, Ram's Vehicle Electrification Manager, Powertrain Engineering, to better understand what it is and how it functions. How eTorque works Ram will offer the 3.6-liter 24-valve V6 with eTorque as the standard engine in most models. The V6 will not be available without eTorque, although we'd be surprised if it wasn't added to the menu at a later date.