2021 Ram 2500 Laramie on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Four Wheeler crowns Ultimate Factory 4x4... who wins?

Nearly every automaker doing business in the SUV or pickup truck segments offers a package designed to improve the off-road capabilities of its wares. But, of course, not all such factory kits are created equal. How, then, to separate the wheat from the chaff? Gather each of them up and put them through their paces, naturally.
The folks from Four Wheeler and PickupTrucks.com joined forces to run just such a comparison test, with the winner named the Ultimate Factory 4x4. A total of seven vehicles showed up to the fight: the 2012 Ford F-150 SVT Raptor, 2013 Jeep Wrangler Rubicon, 2012 Nissan Frontier PRO-4X and Xterra PRO-4X, 2012 Ram Power Wagon, and 2012 Toyota 4Runner Trail and Tacoma TRD T|X Baja Series.
With the contestants in place, the whole crew put each vehicle through a battery of tests that included skidpad and acceleration measurements, a hillclimb, a rocky stairstep course and a rock garden. Considering the nature of the beasts, on-road ride and comfort were not part of the routine.

2020 Ram 3500 heavy duty interior spied

The 2020 Ram 2500 and 3500 trucks continue their steady testing regimen, and the engineers are still keeping the trucks under careful wraps. Or at least they are with the outside. As the photos above show, some test drivers got a little sloppy with interior coverings, and our spy photographer took advantage of the situation. And the good news is that the interior will be basically identical to that of the 2019 Ram 1500. We say good news because the Ram's stylish interior and well-thought-out controls are part of why it's our favorite fullsize pickup right now. This particular model has the 8.4-inch UConnect touchscreen infotainment. Since the entire center stack is the same as the 1500, we wouldn't be surprised if the monster 12-inch display were to be available on high-end trims. The small 5-inch infotainment will probably be the standard option. Another interesting detail is that this test truck does not have the rotary shift dial shared with the Ram 1500 and various other Chrysler products. Instead, it has a traditional steering column-mounted shift lever. As for the outside, nothing new is revealed to us. We shouldn't have to wait too long to see the production truck, though. We expect it to be revealed early next year. What we've seen so far seems to indicate that the heavy duty Rams will have styling a little closer to the old model than to the new 1500. Still, expect grilles and other cues from the lighter duty model, just translated to a slightly different shape. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.