2021 Ram 2500 on 2040-cars

Auto blog

Chrysler recalling 67k trucks with manual transmissions

Earlier this month, Chrysler announced the recall of some 280,000 pickup trucks over concerns that their axles could seize up. Now the automaker has announced an entirely separate recall of another 66,819 trucks over the springs that could break in the clutch ignition interlock switch. The recall affects Dodge Ram 1500, 2500 and 3500 pickups, as well as the Dodge Dakota and Mitsubishi Raider. The issue is relevant only to those trucks fitted with manual transmissions, from the 2006 and 2007 model years and manufactured between July 1, 2005, and July 31, 2006. Since a broken spring could, according to statements issued by the National Highway Traffic Safety Administration and FCA US LLC (previously known as the Chrysler Group) prevent the vehicle from starting, or cause it to move unintentionally once the ignition kicks over, the automaker will begin notifying owners of the affected vehicles just before Valentine's Day to bring their trucks into their local dealers to have the clutch ignition interlock switch replaced. FCA emphasizes, however, that the unintended movement would only occur "in rare cases" and only "if recommended starting procedures are not followed." Only one such case is known to have occurred, but it did regrettably result in a fatality. Statement: Clutch Ignition Interlock Switch December 29, 2014 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary global recall of an estimated 66,819 older-model pickup trucks equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. An investigation by FCA US engineers discovered switches in certain model-year 2006 and 2007 pickups may be equipped with spring wire that differs from wire used in previous switches. The alternate wire may break and, as a result, the vehicles may not start. In rare cases, a vehicle may – if recommended starting procedures are not followed – exhibit unintended movement when its ignition key is turned. The Company is aware of one fatality related to this campaign. It stemmed from the single known accident involving this population of vehicles. The recall covers certain Dodge Dakota, Dodge Ram 1500, 2500, 3500 and Mitsubishi Raider pickups. Switches with the alternate wire were not used in any vehicles produced before July of 2005, or after June of 2006. The Dakota and Raider are no longer in production.

More details on the Hellcat-powered Ram Rebel TRX

We got our last big scoop on the coming Ram Rebel TRX last summer, when Jordan Denhoed caught a pack of prototypes testing in Michigan's Silver Lake Sand Dunes. We'd heard then that as opposed to the TRX concept, the production truck would unlock the full 707 horsepower from its 6.2-liter Hellcat V8, and use a traditional shift lever to work the gears of a 10-speed automatic. Now Mopar Insiders and Allpar have another batch of details that both sides said were gleaned from insiders with knowledge of the product. The looks, which will hew closely to the concept, have apparently already been teased. The Dodge and Ram corners of FCA like to foreshadow future offerings in their press photos and flyers, Ram doing so again on a graphic that advertised the FCA 2020 Drive for Design contest, pictured. We're told to expect the same twin-vented hood and flared arches front and back, as well as a new take on the current Ram Rebel grille that frames headlights from the Laramie Black trim. The side-exit exhaust would be cool, but we doubt it makes production. That extra width necessitates amber marker lights. The Ford F-150 Raptor, which uses the same lights for the same reason, places its markers along the top edge of the grille just below the grille surround. Mopar Insiders says the Rebel TRX's amber markers will lurk inside the large hood scoop. The Hellcat will get plenty of air from additional vents astride the headlights, and vent its heat through extractor vents just ahead of the windshield and ahead of the front doors. In lieu of any Hellcat badging save for on the supercharger, script on the hood in the same font as the Rebel TRX concept will read, "6.2L Supercharged." In back, yet more vents mimic those in the front fascia, this time placed next to the taillights. There will be an LED CHMSL, and larger diameter exhaust tips poking out of the bumper. Inside, Allpar says Ram plans to follow the Dodge SRT template by loading up the interior; the question is whether there will be a base model, or if it's only SRT plus options. The luxury angle means the 12-inch Uconnect infotainment system will be standard, with off-road-specific screens among the Performance Pages. Allpar confirms the conventional shifter, and Mopar Insiders says the lever will be joined by aluminum shift paddles borrowed from the Alfa Romeo Stelvio Quadrifoglio. The paddles will be longer than those in the Italian crossover, and mounted on the steering wheel.

The 2021 F-150 elevates Ford's bed game

The new 2021 Ford F-150 is ushering in a new era of pickup capability, but there's more to it than the introduction of the PowerBoost hybrid. While that new powertrain is certainly the truck's headlining element, the supporting electrical architecture enables a level of utility that hasn't been offered in past consumer half-tons. The true party trick is Ford's new "Pro Power Onboard" feature, which is essentially a built-in generator that provides juice for the 2021 F-150's rather robust in-bed power station. This system is available even on gasoline-engine models, but its utility is maximized with the electrified powertrain. ICE models equipped with the option max out at 2.0 kilowatts, while the PowerBoost hybrid can be had with either a 2.4- or a whopping 7.2-kilowatt inverter.  The idea here is that the F-150 can essentially stand in for a high-output portable generator. In a worksite example provided by Ford, a PowerBoost model with the 7.2-kW upgrade and a single tank of fuel could provide 32 hours of power for an 1,800-watt compound miter saw, a 1,000W circular saw, a 1,200W battery charger, a 1,200W hammer drill, and a 1,000W air compressor with hundreds of watts to spare for lighting and other accessories. But even without the Pro Power Onboard option, Ford's new bed setup enables more versatility than in previous models. The new Tailgate Work Surface option adds a flat work area with integrated rulers, recesses for pencils or small tools, and even a stand for a personal device.  Ford is neither the first to offer an auxiliary power outlet in a half-ton pickup bed, nor was Ford the first to introduce a more feature-rich tailgate. GMC's MultiPro tailgate was a major innovation on that front, and while it is geared mostly toward improving the cargo utility of the bed, it can also be customized with 12-volt power and even an accessory speaker system. The Ram 1500 is also offered with both a multi-function tailgate and AC power in the bed, though the latter option is limited to models with the RamBox cargo package.  As half-ton pickups approach levels of towing and hauling capability that begin to blur lines with heavy-duty offerings, it's clear that automakers are looking for ways to differentiate themselves without stepping on their own bigger trucks' toes. These new bed and tailgate innovations may yet be the tip of the iceberg when it comes to full-size pickup versatility. Related Video: