2013 Laramie Crew 4x4 Navigation Sunroof Leather Heated Cummins Diesel Uconnect on 2040-cars

Auto blog

Ram recalls 2014-2019 1500 EcoDiesel trucks for coolant leaks

Ram will recall 108,000 Ram 1500 EcoDiesel pickup trucks in the United States for coolant leaks tied to reports of some fires and four minor injuries. Another 50,000 trucks will be recalled in Canada, and fewer than 2,000 sold in markets outside of North America. The recall covers trucks from the 2014 through 2019 model years. The automaker said it found microscopic cracks in some Exhaust Gas Recirculation coolers through dealer-service reports and "other data streams." Such cracks may allow coolant to "escape and – in rare circumstances – pose an engine fire risk." The injuries occurred when customers attempted to manually extinguish engine compartment fires. FCA said it is not aware of any crashes tied to the recall. The automaker will alert owners when they can get recall repairs. Until then customers should monitor coolant levels and contact dealers if they are consistently low. The recall does not affect the redesigned, current-generation Ram 1500, nor any gasoline-powered Ram 1500 from any model year. Customers with questions or concerns may call 1-800-853-1403.

Ram ramping up MI truck production, does deal with Texas Rangers

Thanks to a host of upgrades at the Warren Truck Assembly Plant in Michgan, Ram Trucks is boosting production of the already strong-selling Ram 1500 to build 28,585 more of them a year. That works out roughly to five more per hour, or an additional 100 per day. The major key to the improvements was redesigning 353 assembly workstations to allow employees complete their tasks more efficiently. According to Ram, the expansion was done to meet growing demand for the pickup.
These kinds of comprehensive changes can't happen over night, obviously. From the end of 2013 through the summer shutdown in August, the Warren Truck plant received automation tweaks in the body shop and upgrades to the color booths in the paint shop.
However, the biggest shift was working with "UAW-represented team leaders and operators" to examine every workstation for efficiency improvements. In that analysis, the company identified and altered over 100 problems that could have caused an injury. What really helped to boost the production rate so significantly was moving about 300 parts, or grouping them into kits for better ergonomics, and eliminating walks to grab tools. Once everything was done, about 63 percent of workers at the factory got updated training.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.