2012 Ram 2500 Laramie 4x4 Manual Transmission With Only 4,991 Miles!! on 2040-cars

Auto blog

2020 Ram 2500 in minimal camouflage reveals lights, grille

The folks at FCA have kept the next-generation Ram Heavy Duty trucks well-covered up to now. Now, we finally get to see an example of the truck with minimal vinyl wrap camouflage, giving us our best look yet at the 2020 Ram 2500. It has a number of design cues taken from Ram 1500, but it has a number of distinct differences. At the front, we have a pretty clear look at the 2500's fascia. The grille shares the same non-crosshair design of the 1500. It's flanked by wide headlights, and there's a chrome line that runs along the tops of the headlights and wraps around the top of the grille. Unlike the 1500, the 2500's grille is much taller, sticking way up above the headlights. It also retains the slightly trapezoidal shape. The headlights also have turn signals that protrude from below. The rest of the truck is still relatively well-covered. One key detail we can make out is the taillights, which appear to be the same as those used on the 2019 Ram 1500 Tradesman. As such, the bed will likely share cues with the 1500, such as the molded belt line low on the bedsides. Past spy photos have also revealed that the 2500 will also share the 1500's sharp interior. We're expecting to hear more about the heavy duty Ram in the next few months. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery 2020 Ram 2500 View 24 Photos Image Credit: SpiedBilde Spy Photos RAM Truck

2019 Ram 1500 prototype gives us better glimpse of grille

Though we've managed to see most of the 2019 Ram 1500 from previous spy shots, we're still discovering new details here and there in spy photos. The latest batch shown above feature a truck with camouflage that covers most of the body, but curiously leaves the grille practically bare. The grille appears to be a version of what we saw on the nearly uncovered example from a few months ago. This time, that central bar is uncovered. In some ways, it looks like a sleeker version of the grille found on current Laramie Rams; the holes on either side of the emblem area are slimmed way down, and fit a single line. We can also see that those holes line up with the turn signal/daytime running light elements in the headlights. If you're not a fan of this new grille, the good news is that there will probably be a variety of different designs available, just as there are on current Rams. There aren't many other details to glean from this prototype, though. It appears to be the longer of the four-door models and has an impressive amount of glass area. The tailgate is fully covered, so we can't tell if this has a conventional drop-down gate or the split version we've seen on another prototype. We should know much more in about a month when the Ram 1500 is expected to appear at the 2018 Detroit Auto Show. For more about the Ram including renderings of the final truck, check out our post on what we know so far. Related Video:

2019 Ram 1500 spotted with split tailgate

A little over three years ago, we discovered a patent from Fiat-Chrysler that showed a pickup truck tailgate that not only dropped down like a normal one, but was also split into two swing-out halves. It appears to be a reality now, since one of the Ram 1500 prototypes shown above has just such a tailgate. The tailgate above does look a bit different from the one shown in the patent drawings. For one thing, it's not a 50/50 split in the middle. Instead, Ram seems to have opted for something like a 60/40, or maybe 70/30 split. We're not sure exactly why this is, but there could be a few advantages. For one, It probably allows for the use of the same or nearly the same handle as on conventional Rams, as well as the same badging. For another, if the tailgate operates as described in the patent, it might be possible to open just one side without opening the other, and having the shorter piece could offer some flexibility in tight areas where a larger half couldn't open fully. Testing alongside the split tailgate truck were some other Ram 1500s that had their tailgates completely covered. They did reveal some other cargo management features that should show up on the production truck, such as a return of the RamBox bedside storage compartments. One of the trucks also revealed some ribbed bedsides that would allow the positioning of a cargo divider just about anywhere in the bed. We expect to see the new Ram 1500 to be fully revealed at the Detroit Auto Show in January. In the meantime, you can check out what we believe the production truck will look like, as well as everything we know about it, here. Related Video: