2012 Dodge Ram 2500 Crewcab 4x4 Custom Paint on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

2014 Ram Promaster pricing starts at $26,030*

Looking to get back into the thick of things in the commercial van market, Chrysler has set the pricing for the Fiat Ducato-based 2014 Ram Promaster. When it goes on sale by the end of this year, the new Promaster will have prices that range from $26,030 for the Promaster 3500 chassis cab cutaway with a 136-inch wheelbase and topping out at $36,150 for the long-wheelbase, high-roof 3500 cargo van (*prices don't include the $995 destination charge).
While pricing was released for a total of 14 build configurations (including the addition of a 2500 cargo van equipped with rear windows that was not previously announced last month), Chrysler has still not announced how much it will cost to get the optional combination of the EcoDiesel engine and the six-speed automated manual transmission and if it will be available in all styles. To see the full pricing breakdown for each Promaster model and body configuration, scroll down for Chrysler's official press release.

2018 Ram ProMaster Quick Spin Review | Big van, big fan

I've moved a lot over the past decade or so. Since the beginning of 2008, I've held nine different addresses: five in Alabama, two in California and two in Michigan. I've had a lot of experience moving, sometimes multiple times to multiple states in a single year. Simply put, I get around. And f or most of these moves, I made do with SUVs, hatchbacks, borrowed pickups or rented box trucks. After putting more than 2,000 miles on a GMC Savana during my (second) move to from Alabama to California, I was fed up with the headache of it all. The GMC had no cruise control, no sound deadening and a V8 that downed fuel with the gusto of a drunk at an open bar. It was an almost entirely unpleasant experience. Yes, I know that's how trucks used to be, but when there's an alternative, I'll take it. This latest move — all of 2.2 miles — was the shortest I'd had in years. While our long-term 2018 Honda Ridgeline would have sufficed for 90-percent of the move, it isn't quite long enough to move two couches, a shelf and a king-size bed. Sure, I could have gone to U-Haul, but why bother there was a Ram ProMaster in the local fleet that I could put to good use? I wanted to really see how far things have come in recent years. My chariot was a long-wheelbase high-roof van in work-site white. It's as inoffensive and anonymous as they come. The ProMaster is based on the Fiat Ducato, and it's an unfortunate looking machine, though I doubt many people in the market for a good work van give much thought to the van's design. There are a lot of variations of the ProMaster when it comes to wheelbase and cab configurations, but all models have the same standard drivetrains. Power from the 280 horsepower V6, like the one in the van I drove, is sent to the front through a six-speed automatic. A 3.0-liter turbo-diesel V6 is optional, boosting torque from 260 pound-feet to 300 pound feet, but it's paired with a less-than-stellar automated manual transmission that's not nearly as smooth or refined as its torque-converter counterpart. The seating position was high and commanding. It's a bit of a climb to get into, but once you're seated it's actually quite comfortable. Since you're nearly on top of the front wheels, forward visibility is excellent. The passenger area is spartan but packs tons of little cubbies, pockets and cup holders. I found perfect spots to stick extra bungee cords, gaffers tape and ratchet straps. Compared to the old vans I was used to, it was a revelation.