12 Dodge Ram 2500 4x4 Laramie Longhorn Cummins Diesel Navigation Roof on 2040-cars

Auto blog

2019 Ram 1500 eTorque Drivers' Notes Review | Filling in the gaps

When the 2019 Ram 1500 debuted earlier this year at the 2018 Detroit Auto Show, the biggest news was arguably the addition of the 48-volt mild hybrid system. Dubbed eTorque, the system is standard on V6-equipped models and a $1,450 option on trucks with the 5.7-liter Hemi V8. It's not a hybrid in the traditional sense. Despite Ram's claim that the system adds up to 130 pound-feet of torque on the V8, it only does so for a fraction of a second and doesn't actually change the engine's total output. You'd be hard pressed to notice a difference if you didn't know the system was there. But that's kind of the point. There's been a lot of confusion about what eTorque is and how the system works. Much of that falls on FCA's shoulders. The automaker didn't do a great job of explaining the whole thing, leaving us to work out much of it for ourselves. This isn't meant to boost performance, towing or payload. The Ram eTorque can't run on battery power, so don't expect a Toyota Prius with a bed and wood trim. It's here to make the truck just a little bit more efficient by improving areas where conventional internal-combustion engine's fall short. The eTorque system replaces the engine's alternator with a small, belt-driven electric motor. On the V6, the motor is part of the water pump assembly and driven by that belt; the V8 uses a dedicated belt that's separate from the other accessories. A small battery pack is mounted upright behind the rear seats inside the truck's cabin. There's also a DC-to-DC converter to charge the battery and convert 48 volts down to 12 to power the truck's normal systems. Visually, the only difference between an eTorque-equipped model and a standard one is a small metal box at the top of the engine. There's no badging and the battery pack can't be seen, even with the rear seats folded up. The system is designed to be as seamless and innocuous as possible. The auto start/stop system spins up the engine a little quicker. Shifts from the eight-speed ZF automatic transmission are a little smoother as the eTorque system smooths out and fills in the gaps. It does so for a fraction of a second, but it works its magic often. Big gains in fuel economy have already been made. It's going to take things like Ram's eTorque system to improve internal combustion engines from here on out. Editor-in-Chief Greg Migliore: I'd like to say I noticed a huge difference between the Ram eTorque and the regular Ram, but I didn't. That's how it's supposed to work.

FCA recalling 323,000 cars for wiring, software issues

The Basics: Fiat Chrysler Automobiles (FCA) is conducting a voluntary recall for an estimated 323,361 cars in the US. The affected vehicles were built after September 23, 2014 and include: the 2015 Chrysler 200, Ram ProMaster City, Jeep Renegade, and 2014 and 2015 Jeep Cherokees. The Problem: An insufficient crimp in the vehicles' wiring harness may result in a solenoid fault code, which could cause the engine to stop. The loss of power could lead to an accident. Injuries/Deaths: None reported. The Fix: FCA will update the affected vehicles' software and replace wire harnesses, as needed. According to FCA, owners that experience the problem can temporarily resolve the issue by restarting the vehicle. If you own one: FCA is reaching out to owners to schedule a service. Related Video: Statement: Wire Harness Crimp July 22, 2016 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 323,361 vehicles in the U.S. to update certain software and replace wire harnesses, as needed. An examination of warranty data led to an FCA US investigation that discovered an insufficient crimp in a wire harness. Such a crimp may lead to a solenoid fault code that can cause propulsion loss. The Company is unaware of any related injuries or accidents. Most vehicles in the recall population will not experience this fault code over their lifetimes. However, should the condition occur, it can typically be temporarily resolved by stopping the vehicle and re-starting its engine. Accordingly, FCA US urges customers to heed the instructions on their recall notices. Affected are certain model-year 2015 Chrysler 200 midsize sedans, Ram ProMaster City small vans, Jeep Renegade and Cherokee SUVs. Certain model-year 2014 Cherokees are also affected. A change made in the harness-manufacturing process eliminates the need to recall any vehicle built after Sept. 23, 2014. An estimated 35,511 additional vehicles in Canada are included in the campaign; as are 7,067 in Mexico; and 43,927 outside the NAFTA region. Customers will be advised when they may schedule service. Those with questions may call the FCA US Customer Care Center at 1-800-853-1403. News Source: FCAImage Credit: AOL Recalls Chrysler Jeep RAM FCA jeep renegade ram promaster city

Ram boosts Heavy Duty truck claims for 2015 [w/video]

The heavy-duty truck segment boasts some of the tightest competition of any automotive niche in the US. Being able to tout just one best-in-class figure can be a marketing advantage over competitors, and Ram Trucks is adding one more accolade to its tally with a powertrain update for the 2015 Ram 2500 and 3500 Heavy Duty pickups. Ram now claims best-in-class ratings for torque, towing and payload, depending on configuration.
The major change comes for the 3500 HD with a boost in torque for its Cummins 6.7-liter, inline-six diesel engine. It now produces a meaty 865 pound-feet of twist, a boost of 15 lb-ft, which is the best figure in its segment, according to the company. To eek out the extra power, the mill has more aggressive fuel delivery, and the turbo has been recalibrated. Of course, more grunt would be meaningless if drivers couldn't do anything with it, and the tweaks help allow payload to grow to 7,390 pounds, up from a rating of 7,320 pounds last year. The max towing rating remains unchanged at 30,000 pounds, though.
The rest of the powertrain lineup carries over from last year. The base HD mill is the gasoline-fed 5.7-liter V8 with 383 hp and 400 lb-ft and a six-speed automatic. The next step up is a 6.4-liter V8 with 410 hp and 429 lb-ft. There are also three trims of the 6.7-liter Cummins diesel starting with 350 hp and 660 lb-ft with a six-speed manual gearbox. If buyers opt for a the 68RFE six-speed auto, they get 370 hp and 800 lb-ft. Finally, there's the updated, top-rung version with 385 hp and 865 lb-ft with an Aisin six-speed automatic transmission.