12 Dodge Ram 2500 4x4 Cummins Diesel Warranty 20 Inch Xd Wheels Look on 2040-cars

Auto blog

Fiat Chrysler to recall 100,000 Ram ProMaster vans over engine fire risk

Fiat Chrysler is recalling nearly 100,000 Ram ProMaster vans sold in the U.S. to address an overheating issue in fan motors. The recall is limited to vans from the 2015 through 2018 model years equipped with air conditioning. The recall affects ProMaster vans equipped with 3.0-liter diesel or 3.6-liter gasoline engines. FCA says the engine cooling fans may seize up and the circuit breaker may not protect them from overheating, presenting a heightened risk of fire. That’s despite a warning-light illumination in the vans. FCA first opened an investigation in July after the U.S. Postal Service reported incidents where the engine compartment caught fire. It says it is not aware of any injuries related to the issue despite 21 complaints of smoke or fire and 13 reports from dealers. A remedy is still under development. The recall is estimated to launch in the first quarter of 2020. Separately, FCA says itÂ’s recalling an estimated 51,788 Fiat 500 compact cars from 2012 and 2013 in the U.S. to replace faulty shift-cable bushings that may degrade over time from exposure to heat and humidity. That could cause the shift cable to separate from the transmission linkage, making the shifter inoperable. The company says itÂ’s aware of three minor accidents that could be related to the issue, but no potentially related injuries. Affected customers may notice looser shifter movement, although the instrument cluster will always indicate the correct gear selected. Service will be provided free of charge, and customers will be notified. Owners with questions can also call 800-853-1403. The Fiat 500 recall also affects an estimated 10,627 models in Canada, 3,520 in Mexico and 6,826 outside North America.

2019 Ram 1500 prototype gives us better glimpse of grille

Though we've managed to see most of the 2019 Ram 1500 from previous spy shots, we're still discovering new details here and there in spy photos. The latest batch shown above feature a truck with camouflage that covers most of the body, but curiously leaves the grille practically bare. The grille appears to be a version of what we saw on the nearly uncovered example from a few months ago. This time, that central bar is uncovered. In some ways, it looks like a sleeker version of the grille found on current Laramie Rams; the holes on either side of the emblem area are slimmed way down, and fit a single line. We can also see that those holes line up with the turn signal/daytime running light elements in the headlights. If you're not a fan of this new grille, the good news is that there will probably be a variety of different designs available, just as there are on current Rams. There aren't many other details to glean from this prototype, though. It appears to be the longer of the four-door models and has an impressive amount of glass area. The tailgate is fully covered, so we can't tell if this has a conventional drop-down gate or the split version we've seen on another prototype. We should know much more in about a month when the Ram 1500 is expected to appear at the 2018 Detroit Auto Show. For more about the Ram including renderings of the final truck, check out our post on what we know so far. Related Video:

FCA plants skipping summer shutdown to keep up with demand

Hopefully, some FCA US factory employees don't have big plans for the usual summer shutdown, because the automaker is keeping several plants running this year. Demand is so high that the company wants to keep models rolling off the assembly lines. Four FCA US assembly plants, all the engine factories, and some locations that build transmissions are staying open throughout the summer, according to the Detroit Free Press. Usually, these sites would see a two-week shutdown for the company to retool and perform repairs. This year, factories are staying open for FCA to support its strong sales. The lines that remaining humming through the summer show an inclination toward the automaker's popular SUV's and crossovers. They include the Jefferson North Assembly Plant in Michigan that builds the Jeep Grand Cherokee and Dodge Durango; Saltillo Van Assembly in Mexico that constructs the Ram ProMaster; Toledo Assembly Complex in Ohio that produces the Cherokee and Wrangler; and Toluca Assembly in Mexico that makes the Dodge Journey and Fiat 500. Related Video: News Source: The Detroit Free PressImage Credit: Bill Pugliano / Getty Images Plants/Manufacturing Dodge Fiat Jeep RAM FCA dodge journey fca us ram promaster Jefferson North Assembly Plant