2025 Ram 1500 Laramie on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Ram wants its midsize truck situation 'fixed soon'

The rumors of a midsize Ram pickup are like a metronome — sometimes in motion, sometimes dead. This week the rumor is alive, so reports Automotive News. Fiat Chrysler CEO Mike Manley admitted during an earnings call that the lack of a mid-sizer is "a clear hole in our portfolio," and that the Ram product development team is "focused on it." Puzzling that out means finding "a cost-effective platform in a region where we can build it with low cost and it still being applicable in the market." But he wants a solution found soon. During the product roadmap presentation FCA made in June last year, late CEO Sergio Marchionne said the middling pickup would be built in Mexico. That tidbit came after years of Marchionne saying the brand would get in the segment, only to have the idea shot down by Ram bosses. At the 2012 Detroit Auto Show, a year after the midsize Dodge Dakota went off the market, Marchionne said the brand would reinstate a new-generation Dakota, with a better-than-50% chance it would be unibody. In 2013, then-Ram president Reid Bigland said the chances were tiny because the numbers didn't add up. The two men got on the same page, in favor of, in 2014. In March 2016, Marchionne said, "I like that space a lot," and "It's a good space to be in." Exactly one month later, then-Ram CEO Bog Hegbloom said the idea was dead because he couldn't make a business case for it. Come early 2018, even Marchionne had joined the naysayers. He told Automobile, "We did not think it was necessary to re-enter that market after our last experience." The snag was, and remains, that a smaller truck has "a cost structure very similar to our Ram 1500. We have not found an economic way to get this done." Four months later, there's a midsize pickup on the product roadmap. Then, at this year's New York Auto Show, Ram Trucks boss Jim Morrison told us Ram had no plans yet for a smaller pickup, although the division continues to look at its options. Last September an Automotive News report forecast the truck to be built in Toledo alongside the Jeep Wrangler and Gladiator pickup. When Car and Driver asked for clarification about Toledo or Mexico, FCA pointed to Marchionne's comments referring to Mexico. It appears that's the angle Manley and his team are still trying to make work. The Saltillo, Mexico, assembly plant now builds Ram's heavy-duty trucks, but observers expect HD production to move to the U.S. to make room for the smaller pickup.

EV cost burden pushing automakers to their limits, says Stellantis' CEO Tavares

DETROIT — Stellantis CEO Carlos Tavares said external pressure on automakers to quickly shift to electric vehicles potentially threatens jobs and vehicle quality as producers struggle with EVs' higher costs. Governments and investors want car manufacturers to speed up the transition to electric vehicles, but the costs are "beyond the limits" of what the auto industry can sustain, Tavares said in an interview at the Reuters Next conference released Wednesday. "What has been decided is to impose on the automotive industry electrification that brings 50% additional costs against a conventional vehicle," he said. "There is no way we can transfer 50% of additional costs to the final consumer because most parts of the middle class will not be able to pay." Automakers could charge higher prices and sell fewer cars, or accept lower profit margins, Tavares said. Those paths both lead to cutbacks. Union leaders in Europe and North America have warned tens of thousands of jobs could be lost. Automakers need time for testing and ensuring that new technology will work, Tavares said. Pushing to speed that process up "is just going to be counter productive. It will lead to quality problems. It will lead to all sorts of problems," he said. Tavares said Stellantis is aiming to avoid cuts by boosting productivity at a pace far faster than industry norm. "Over the next five years we have to digest 10% productivity a year ... in an industry which is used to delivering 2 to 3% productivity" improvement, he said. "The future will tell us who is going to be able to digest this, and who will fail," Tavares said. "We are putting the industry on the limits." Electric vehicle costs are expected to fall, and analysts project that battery electric vehicles and combustion vehicles could reach cost parity during the second half of this decade. Like other automakers that earn profits from combustion vehicles, Stellantis is under pressure from both establishment automakers such as GM, Ford, VW and Hyundai, as well as start-ups such as Tesla and Rivian. The latter electric vehicle companies are far smaller in terms of vehicle sales and employment. But investors have given Tesla and Rivian higher market valuations than the owner of the highly profitable Jeep and Ram brands. That investor pressure is compounded by government policies aimed at cutting greenhouse gas emissions. The European Union, California and other jurisdictions have set goals to end sales of combustion vehicles by 2035.