2022 Ram 1500 Big Horn Crew Cab 4x4 5'7" Box on 2040-cars

Auto blog

2020 Ram 1500 4x4 Suspension Deep Dive

What is taking everyone so long? That’s what I continually ask myself each time yet another all-new full-size pickup comes out with leaf spring rear suspension. Meanwhile, this 2020 Ram 1500 pickup represents a dozen years since coil spring rear suspension debuted when its prior generation was still being called a Dodge Ram 1500. Ford, Chevrolet, Toyota and Nissan introduced full redesigns of their pickups well after Ram proved that coil springs were the way to go, and yet leaf springs persist with the competition. IÂ’m not just popping off, here. In the 1990s I used to specialize in pickup truck suspension tuning for the Toyota Technical Center. Leaf springs are crude and loaded with compromises, but thatÂ’s all that truck design engineers ever gave us to work with. I was instantly all-in on RamÂ’s move to rear coils after the first few miles of driving a 2009 Ram 1500 pickup. Empty-bed ride comfort and handling were on another level, but it could still tow and haul. In fact, towing stability proved to be frankly incredible on the normally-treacherous downhill leg of my winding tow test grade. I fully expected everyone would copy it immediately. But they didnÂ’t. Others may have doubted the payload aspects. Ram never did. It soon doubled down and put coils under the back of its 2014 2500-series trucks. IÂ’ve developed other theories that seek to explain why no one followed their lead, but theyÂ’re not worth dredging up because I think the dominoes will soon begin to fall. Spy photos suggest that the next Toyota Tundra will switch to coils, and there are rumors that the Ford Raptor is going that way. ThatÂ’s not much of a stretch because the Ranger Raptor (only available outside the U.S.) already has coil spring rear suspension. WhatÂ’s the big deal? LetÂ’s take a look at the underside of a 2020 Ram 1500 Laramie 4x4, the second iteration of the Ram 1500 to employ coil spring rear suspension.   As it has for some time, the front end of the Ram 1500 rides on double wishbone suspension. The truck employs a high-mount upper wishbone (yellow arrow) that positions the upper ball joint up behind the tire sidewall instead of inside the wheelÂ’s barrel. This layout offers improved steering geometry and reduced stress in the upper ball joint, the upper control arm and its mounting points.   Coil-over spring/shock assemblies (green) come standard on all 2019+ (fifth-generation) Ram 1500 pickups whether they have four-wheel drive or not.

2021 Ram 1500 TRX debuts as a Hellcat-powered, desert-running Raptor killer

The 2021 Ram 1500 TRX is here, and Ford’s free ride is over with the F-150 Raptor. Ford has had it good for a long time without any significant competition. Neither GM nor FCA entered the off-road full-size truck market with an offering like the Raptor. Chevy makes the Colorado ZR2, but itÂ’s a midsize truck. With the introduction of the Ram TRX, Ford finally has a proper competitor. Timing of the Ram TRXÂ’s release happens to fall in an in-between time for the Raptor, too. The F-150 is all new for 2021, but Ford hasnÂ’t released any details on the Raptor variant — though, weÂ’ve heard that the wait wonÂ’t be long. Regardless, Ford had better be aiming for the moon if it aims to best the TRX, because RamÂ’s new off-road truck is one hell of a moonshot. There is a lot to take in here, so weÂ’ve divided the chunks of information into a few digestible sections. LetÂ’s start with the underneath bits, which are arguably the most important of all when desert running and jumping is taken into consideration. Ram TRX frame and suspension Ram boasts that the frame underneath the TRX is 75 percent different from a regular Ram 1500. It uses thicker high-strength steel with low torsion attributes for stability and durability. The side rails are fully boxed, and sections of the frame are hydroformed. Ram claims its truck holds up to jumping and high impact events better than the competition, which in this case is simply code for the outgoing Raptor. ItÂ’s designed to handle rough terrain at 100 mph-plus. Compared to a Ram 1500 with the 5.7-liter V8, itÂ’s 600 pounds heavier. Ram is not messing around here. Damping is taken care of by Bilstein Black Hawk e2 adaptive shocks, aided by nitrogen-charged remote reservoirs to ensure maximum durability. The shocks will continuously adjust damping force to best handle the terrain, but you can control them via a number of modes, too. Ram says that in addition to the off-road capability, the shocks make for a smoother ride on pavement. The internals of the shocks feature a “Jounce Cut Off” that has three zones for progressive bottom-out control. You know, for when you take that jump at speed on your way to the office. 2021 Ram 1500 TRX chassis with brakes View 7 Photos Just like the other Ram 1500s, this one uses a five-link coil suspension design for the rear. However, the design is unique to the TRX with different hard points to allow room for a Dana 60 rear axle.

Ram goes all-in on SAE J2807 tow ratings [w/video]

Thanks to the Society of Automotive Engineers (SAE), when car shoppers look at horsepower and torque figures on vehicles, they know that all the automakers are calculating them the same way. However, that isn't the case when it comes to truck buyers and max towing capacity ratings because each company figures the value differently. That practice finally changes with the SAE's standardized J2807 system, though, and Ram Truck is the first one to apply the new test procedure to its entire light- and heavy-duty pickup range.
All models of the Ram 1500, 2500 and 3500 use the new, standardized rating for the 2015 model year, but buyers might not notice too much difference. According to the company, in 99 percent of cases the max towing weights are unchanged or even improve slightly from last year. That's a strong result compared to the 2015 Chevrolet Silverado and GMC Sierra that are seeing few increases but mostly decreases under the new testing procedure.
"For too long, an uneven playing field existed and towing capacities went unchecked. We're happy to be the only pickup truck manufacturer to align with the SAE J2807 towing standard across our pickup truck lineup," said Mike Cairns, director of Ram Truck engineering, in the company's announcement of the new specs.