2021 Ram 1500 Big Horn Crew Cab 4x4 5'7" Box on 2040-cars

Auto blog

2020 Ram 2500 in minimal camouflage reveals lights, grille

The folks at FCA have kept the next-generation Ram Heavy Duty trucks well-covered up to now. Now, we finally get to see an example of the truck with minimal vinyl wrap camouflage, giving us our best look yet at the 2020 Ram 2500. It has a number of design cues taken from Ram 1500, but it has a number of distinct differences. At the front, we have a pretty clear look at the 2500's fascia. The grille shares the same non-crosshair design of the 1500. It's flanked by wide headlights, and there's a chrome line that runs along the tops of the headlights and wraps around the top of the grille. Unlike the 1500, the 2500's grille is much taller, sticking way up above the headlights. It also retains the slightly trapezoidal shape. The headlights also have turn signals that protrude from below. The rest of the truck is still relatively well-covered. One key detail we can make out is the taillights, which appear to be the same as those used on the 2019 Ram 1500 Tradesman. As such, the bed will likely share cues with the 1500, such as the molded belt line low on the bedsides. Past spy photos have also revealed that the 2500 will also share the 1500's sharp interior. We're expecting to hear more about the heavy duty Ram in the next few months. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery 2020 Ram 2500 View 24 Photos Image Credit: SpiedBilde Spy Photos RAM Truck

2014 Ram Promaster recalled over stuck pedal fears

Ram's new, Fiat-derived cargo van, the ProMaster, is set to be recalled over concerns that the accelerator pedals could stick. The issue affects 9,655 ProMasters, with 7,935 vans in the US, 1,437 vehicles in Canada and 283 in Mexico.
There have been no reported injuries or crashes from the issue - according to The Detroit News, there haven't even been any customer complaints. The issue was reportedly discovered while Chrysler was testing the vehicle at its proving ground, which is what prompted the internal investigation. Still, it's unlikely that ProMaster vans will suffer from unintended acceleration issues, as each van is equipped with a brake-throttle override.
As of this writing, there's been no bulletin or activity from the National Highway Traffic Safety Administration.

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.