2014 Tradesman New 5.7l V8 16v 2wd on 2040-cars

Auto blog

Italian coachbuilder wraps a modern-day Citroen van in a retro skin

Italian coachbuilder Caselani resurrected an obscure, often-forgotten model from Citroen's past to offer van buyers an additional retro-styled option. Called Type HG, it's based on the current-generation Citroen Jumpy. One of the French carmaker's best-known vintage vans is the Type H, which was built with only minor changes from 1947 to 1981. It's aged into a sought-after classic that's popular as a food truck and as a camper from Paris to Sydney. Few realize Citroen planned to release a smaller model named Type G which looked almost exactly like the H but used an air-cooled flat-twin engine shared with the 2CV. Several prototypes were made, but the project was canned in favor of the 2CV-based, nine-horsepower AU van released in 1951. It's this little-known prototype that only exists in Citroen's official heritage collection and in the minds of the most indoctrinated French car enthusiasts that Caselani chose to bring into the 21st century. And, because the Type G (shown below) was a shrunken copy of the Type H from a design standpoint, making a body kit that fits the Citroen Jumpy was relatively simple. Caselani liberally borrowed styling cues from its modern version of the Type H, which is based on the larger Citroen Jumper sold as the Ram ProMaster in the United States. It adds a new-look front end with a vertical grille, chromed chevrons, and round headlights positioned as far out of the body as regulations permit, corrugated body panels, and a redesigned rear end. Whitewall tires are optionally available. Caselani offers the Type HG as a passenger van, a crew-cab van, and a panel van. Pricing starts at 29,400 euros before taxes are factored in, a sum that represents about $35,000 and that corresponds to a short-wheelbase panel model powered by a 100-horsepower, four-cylinder turbodiesel engine. Alternatively, motorists who already own a Jumpy can purchase the transformation kit on its own for 14,800 euros (about $17,500). For added peace of mind, Caselani pointed out the conversion was created with Citroen's input, and the brand authorized the kit. We know what you're thinking: what on earth is a Jumpy? Glad you asked! It's a van positioned in the middle of Citroen's commercial range. It slots between the Berlingo, which competes in the same segment as the Ford Transit Connect, and the Jumper, which is marketed as an alternative to the Ford Transit.

2020 Ram Heavy Duty Limited Black Edition answers the call of the void

Ram buyers overcome by the lure of the Sith or the call of the void when configuring their pickups have had a variety of ways to go dark on their trucks, from 1500 to the heavy duty line. Now the 2020 Ram 2500 and 3500 HD's top Limited trim is getting access to all the darkness possible with the Black Edition, creating a truck that says "lights out" in about six different ways. The package blacks out the heavy duty rigs entirely, starting with the black grille with black RAM lettering, black bumpers front and back, black tow hooks, black door handles, black side-view trailer tow mirrors, black bezels around the LED headlights and taillights, dark-tinted taillights, and matte badges. Any colored lenses, such as the clearance lights above the cab, are clear. Because on the Ram Heavy Duty Black Edition, black means black. The Black Edition can be optioned on the Ram 2500 or 3500 in 4x2 or 4x4, in single- or dual-rear-wheel trims. When outfitted with single wheels in back, the Black Edition sits on 20-inch black wheels. When dual wheels hang off the back axle, buyers will find 17-inch black wheels with machined eyelets. Engine choices are the regular trio of 6.4-liter Hemi V8 with 410 horsepower and 429 pound-feet of torque, the normal 6.7-liter Cummins straight-six diesel making 370 hp and 850 lb-ft, or a high-output version of the 6.7-liter restricted to the 3500 that puts out 400 hp and 1,000 lb-ft. The three-quarter- and one-ton darkness rolls into dealerships in a few months starting at $64,440 for the Ram 2500 2,745 after a $1,695 destination charge. That's a $1,095 premium over the standard Limited Trim. Assuming the same premium for the Ram 3500 Black Edition means a starting price of $65,790. Related Video:    

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric