2014 Ram 1500 Tradesman/express on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

FCA recalls Ram dualie chassis cabs to recalibrate top speed

If you're one of the 1,771 owners of a 2014-15 Ram 4500 or 5500 chassis cab with a 6.4-liter Hemi V8 and a dualie rear axle, you may be hearing soon from Fiat Chrysler Automobiles to bring your truck in to your local dealer. The reason, you ask? To have the speed limiter recalibrated. The problem, according to the statement below, is that while some of these trucks are electronically limited to 106 miles per hour, their tires can't safely maintain that speed. As a result, FCA is having dealers recalibrate the limiter to 87 mph. Of course, that's still well above the speed limit in most places, and "FCA believes it is unlikely that these trucks are operated at such speeds," but that it "is acting out of an abundance of caution." In addition to the 1,771 units in the United States, the company is recalling another 169 in Canada. In an unrelated campaign, FCA is also recalling a handful or two of 2015 Dodge Challengers – 72 in the US, six in Canada and three in Mexico – to secure a side-curtain airbag bolt that may have been improperly installed during assembly over the course of a ten-day period. In both cases, FCA says it is unaware of any complaints, accidents or injuries related to these issues. Statement: Speed Recalibration May 15, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 1,771 trucks in the U.S. to recalibrate their maximum speed. The dual-wheel trucks are currently restricted to a top speed of 106 miles per hour (mph), but an internal specification review revealed top speed should be set at 87 mph, in accordance with their factory-equipped tires. The Company is unaware of any related injuries, accidents or customer complaints. Dealers will recalibrate vehicle speed accordingly. While FCA believes it is unlikely that these trucks are operated at such speeds, and that doing so would exceed posted speed limits in nearly every applicable jurisdiction, the Company is acting out of an abundance of caution. The campaign is limited to certain model-year 2014-15 Ram 4500/5500 Chassis Cabs equipped with 6.4-liter HEMI V-8 engines. An additional 169 vehicles are believed to be in Canada. Affected customers will be advised when they may schedule service. Customers with questions may call the FCA US Customer Information Center at 1-800-853-1403. ### Statement: Bolt May 15, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 72 cars in the U.S.

Auto Mergers and Acquisitions: Suicide or salvation?

We love the Moses figure. A savior riding in from stage right with the ideas, the smarts, and the scrappiness to put things right. Alan Mullaly. Carroll Shelby. Lee Iacocca. Andrew Carnegie. Steve Jobs. Elon Musk. Bart Simpson. Sergio Marchionne does not likely view himself with Moses-like optics, but the CEO of Fiat Chrysler Automobiles recently gave a remarkable, perhaps prophetic interview with Automotive News about his interest and the inevitability of merging with a potential automotive partner like General Motors. Marchionne has been overtly public about his notion that GM must merge with FCA. For a bit of context, GM sold 9.9 million vehicles in 2014, posting $2.8 billion in net income, while FCA sold 4.75 million units and earned $2.4 billion in net income, painting a very rosy FCA earnings-to-sales picture. But that's not the entire picture. Most people in the auto industry still remember the trainwreck that was the DaimlerChrysler "merger" written in what turned out to be sand in 1998. It proved to be a master class in how not to fuse two companies, two cultures, two continents, and two management teams. Oh, it worked for the two individuals at both helms pre-merger. They got silly rich. And the industry itself was in a misty romance at the time with mergers and acquisitions. BMW bought Rolls-Royce. Volkswagen Group bought Bentley, Bugatti, and Lamborghini, putting all three brands into their rightful place in both products and positioning. No marriages there, so no false pretense. Finally, Nissan and Renault got married in 1999. A successful marriage requires several rare elements in this atmosphere of gas fumes and power lust. But a successful marriage requires several rare elements in this atmosphere of gas fumes and power lust, the principle part being honesty. Daimler and Chrysler lied to each other. The heads of each unit, the product planners, and finance all presented their then-current and long-range forecasts to each other with less-than-forthright accuracy. Daimler was the far greater equal and no one from the Chrysler side enjoyed that. The cultures were entirely different, too, and little was done to bridge that gap. Which brings me back to the present overtures by Marchionne to GM. "There are varying degrees of hugs," Marchionne stated in the Automotive News piece. "I can hug you nicely, I can hug you tightly, I can hug you like a bear, I can really hug you." Seriously?