2014 Ram 1500 Slt on 2040-cars

Auto blog

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.

Thieves stealing Dodge and Ram vehicles right off factory lots

Stellantis-operated storage lots in and around Detroit have been hit by a wave of thefts in recent weeks. Thieves are getting their hands on new, high-end models such as the Dodge Challenger Hellcat by going straight to the source, helping themselves, and driving off. Detroit news channel WDIV Local 4 reported that over half a dozen new cars and trucks have been stolen from various storage lots since the beginning of 2022. On March 10, five Ram trucks were taken from a secured facility in Shelby Township. Several more Ram trucks were stolen on March 8, and one smashed into a semi truck's trailer as it attempted to get away. On March 3, thieves took three Dodge Challenger Hellcat models from a lot in Auburn Hills. And, on February 28, a Jeep Grand Cherokee Trackhawk and a Dodge Challenger Hellcat were stolen from a lot near the Jefferson North assembly plant. Many of the vehicles that thieves are targeting cost nearly $100,000. Stealing a new car from a storage lot is reportedly easier than it might sound. Citing anonymous sources, WDIV explained that the keys are normally left inside of the vehicles while they're parked on the storage lot, waiting to be dispatched to dealers. Security guards patrol the property, yet the thieves are finding ways to sneak into the lot, hop in a car, and drive off by ramming through the gates. Stellantis told the news channel that the Sterling Heights Police Department is investigating the thefts, and that at least one of the lots is managed by a third-party company. It declined to comment on the number of vehicles stolen or the methods used because the investigation is ongoing. In the meantime, the Sterling Heights Police Department plans to send extra patrol cars to the areas around the storage lots. There's no word on whether the missing cars have been found. And, this isn't the first time that thieves have stolen new V8-powered Dodge and Ram vehicles in the Detroit area. In October 2021, thieves stole four cars from a Dodge and Ram dealership about an hour away from Detroit; one was a rare 2021 Durango SRT Hellcat. All four cars were recovered, though the Durango was stuffed into a wall. And, in May 2018, eight Ram trucks were stolen from a factory in Warren, Michigan, by thieves who got away by driving through the main gates.

Ram considering Rumble Bee concept for production

Yellow truck enthusiasts, take note - Ram is considering production for its Rumble Bee Concept, a very, very extroverted pickup that debuted at the 2013 Woodward Dream Cruise. Drawing inspiration from the last Ram Rumble Bee, which in turn borrowed heavily from the Dodge Super Bee muscle cars of the 1960s, the Rumble Bee sports a few things that set it apart from the standard 1500 lineup.
The most obvious change is its retina-scorching, matte yellow paint. Teamed up with a two-inch suspension drop and monster 24-inch black wheels wrapped in low-profile tires, the Rumble Bee cuts an imposing figure. Matching that aggressive exterior is a 5.7-liter Hemi V8, complete with 395 horsepower and an exhaust system that can go from raucous and muscle-car-like to the full-on NASCAR at the push of a button.
According to Edmunds, after a positive reception at the Dream Cruise, the Auburn Hills automaker is now presenting the truck to dealers in a bid to gauge interest. "We try to listen to the dealers. They know their marketplace," Ram's Dave Sowers tells Edmunds, adding that Ram could produce the new truck.