2014 Ram 1500 Slt on 2040-cars

Auto blog

2019 Ram Heavy Duty gets new face, 1,000 lb-ft Cummins and the towing crown

We've seen uncovered images before in spy shots, but here are the official images and word on the 2019 Ram Heavy Duty pickups. Ram dropped so much verbiage on new features that we'd need the truck's 7,680-pound max payload rating to haul the press releases, so dig in. We'll start with that max payload rating, and the 35,100-pound tow rating. Gimlet-eyed truck watchers will note the Ram HD's max tow rating is exactly 100 pounds more than that available on a Ford Super Duty, meaning the Auburn Hills clan takes the "best-in-class" mantle for a few months. The other big number: 1,000 pound-feet of torque from the high-output version of the 6.7-liter Cummins inline-six turbodiesel, a 70-lb-ft increase over the 2018 Ram 3500 HD. Completing the specs at the top, that HO motor produces all that torque at 1,800 rpm, and makes 400 horsepower at 2,800 rpm. One step down, the standard-output 6.7-liter Cummins puts out 370 hp and 850 lb-ft. Thanks to developments like a compacted graphite iron block, lighter pistons, hollow camshaft, and new forged connecting rods and bearings, the Cummins engine has lost more than 60 pounds. The entry-level motor is a 6.4-liter Hemi gas-powered V8 with an unchanged 410 hp and 429 lb-ft. 2019 Ram Heavy Duty View 12 Photos The HO Cummins pairs to an Aisin AS69RC six-speed transmission, with upgraded hardware and programming for better shifting and oversight of the gravity-warping torque. The regular Cummins mates to a "significantly upgraded " version of the in-house 68RFE six-speed automatic. The 6.4-liter Hemi works with the well-known TorqueFlite 8HP75 eight-speed automatic, bolstered for heavy duty obligations, the first time the eight-speed makes an appearance in a Ram HD. A column-mounted shifter works the gearsets on the Cummins-equipped rigs, a rotary dial on the center stack controls the shift-by-wire eight-speed. The Cummins motors come with two 220-amp alternators. The Hemi V8 gets a 220-amp and a 160-amp alternator, which Ram says is the "first gas-driven application of its kind in either class." There will be six trims available: Tradesman, Bighorn/Lonestar, Power Wagon, Laramie, Laramie Longhorn, and Limited. The HD trucks don't share any exterior sheetmetal with the light-duty 1500, and each trim is known by different grilles, bumpers and wheels.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Chrysler set to make $266M-investment into 8-speed transmission production

Chrysler will shortly make a significant $266-million investment into its Kokomo, IN transmission factory in a bid to expand production of its eight-speed automatic transmissions. The gearboxes, which are built under license from Germany's ZF Friedrichshafen, have been well received by customers and critics, and according to an SEC filing obtained by Automotive News, the transmissions will eventually find their way to all of Chrysler's rear-drive offerings (Viper and heavy-duty Ram models, aside). According to AN, a Chrysler spokesman says the investment has not been confirmed, but once it is, it'll mark the company's latest in a growing line of investments at the facility. Chrysler has poured $1.5 billion into Kokomo since 2009.