2014 Ram 1500 Longhorn on 2040-cars

Auto blog

2019 Ram Heavy Duty will have more than 170 available Mopar parts

When it comes to factory-backed modifications, few do it better than FCA's Mopar division. Just look at all the gear that's ready at launch for the new 2020 Jeep Gladiator pickup. In the past month or so, we've seen the debut of the Ram 2500 Heavy Duty and 3500, 4500 and 5500 chassis cab models. At the tail end of the 2019 Chicago Auto Show, FCA revealed a whole host of Mopar parts for the heavy-duty Rams. The display truck is a 2019 Ram 2500 Heavy Duty Big Horn with the 6.4-liter Hemi done up in FCA's Blue Streak paint. Most of the parts are going to be ready at launch, though Mopar says some are just concepts at this point. Actual parts include a black powder-coated "Ram Bar" in the bed fitted with five 5-inch LED lights. The lights are triggered by a switch box in the cab. Other Mopar parts on the truck include a bed step and fender flares as well as interior bits like rubber floor mats and stainless steel door handles. The truck is also fitted with a number of parts that aren't actually available. That includes the 17-inch beadlock wheels fitted with Goodyear tires. There are also rock rails and a bed-mounted spare that's good for up to 37-inch tires. Outside of the truck, Mopar will have a number of parts available at the 2500's launch. Customers can get a trailer camera, fifth-wheel hitch, gooseneck ball kit, bed extender, bed liner, a cargo ramp, toolboxes and more. Related Video:

Junkyard Gem: 1997 Dodge Ram 2500, Vanlife Edition

During my journeys through the big self-service car graveyards of Colorado's Front Range, I find some interesting art cars and labor-of-love hand-built camping vehicles, plus lots of machines with impressively high final odometer readings. Today's Junkyard Gem is one that combines all three types in one fascinating late-20th-century package. I shot these photos way back in December of 2019, just before the pandemic sent thousands of new adventurers pursuing #vanlife dreams on the roads of North America. This '97 Ram three-quarter-ton van is the third generation of a Chrysler van lineage stretching back to 1970. It began life as a 127" wheelbase cargo version with the Maxi stretched rear. The 2500 Maxi's total length of just over 19 feet made it a good starting point for a camper conversion. MSRP for this hauler was $19,600 when new, or about $36,505 in 2022 frogskins. So much work went into this Ram's interior fittings and exterior paint that I knew I'd be able to find something online about its history. After a few fruitless attempts soon after I shot the photos, I back-burnered my Adventure One Van research project for a while. Then, just last weekend, success! It turns out that this van was customized by Antonio de Irun, a multidisciplinary artist in Boulder, Colorado. He refers to this Dodge as an "Adventure Reform Van" and there's a page documenting its construction on the website of a Florida custom-van company. Most of the nice stuff that was inside got removed before the van entered the junkyard ecosystem, but you can see the general structure of the living and storage layout. Plenty of carpentry and upholstery work went into the Adventure Reform Van aka Adventure One. There's electrical wiring, insulation, everything needed for life on the road. Many, many hours of work must have gone into the intricate paint designs all over the vast expanse of Ram Maxi body. So why didn't this van survive into the era of pandemic vanlife? I think this odometer tells us why: 292,844 total miles, of which I'm assuming 200,000 miles were spent on a powertrain-punishing life of deliveries and trips to job sites. The engine is this 5.9-liter Magnum V8, a modernized version of the good old LA-series 360 equipped with the distinctive "beer barrel" intake manifold and rated at 234 horsepower and 330 pound-feet. The 360 first hit the road in the 1971 model year, with production of 360s and the later Magnum 5.9s continuing well into our current century.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.