2014 Ram 1500 Laramie on 2040-cars

Auto blog

Ram ramping up MI truck production, does deal with Texas Rangers

Thanks to a host of upgrades at the Warren Truck Assembly Plant in Michgan, Ram Trucks is boosting production of the already strong-selling Ram 1500 to build 28,585 more of them a year. That works out roughly to five more per hour, or an additional 100 per day. The major key to the improvements was redesigning 353 assembly workstations to allow employees complete their tasks more efficiently. According to Ram, the expansion was done to meet growing demand for the pickup.
These kinds of comprehensive changes can't happen over night, obviously. From the end of 2013 through the summer shutdown in August, the Warren Truck plant received automation tweaks in the body shop and upgrades to the color booths in the paint shop.
However, the biggest shift was working with "UAW-represented team leaders and operators" to examine every workstation for efficiency improvements. In that analysis, the company identified and altered over 100 problems that could have caused an injury. What really helped to boost the production rate so significantly was moving about 300 parts, or grouping them into kits for better ergonomics, and eliminating walks to grab tools. Once everything was done, about 63 percent of workers at the factory got updated training.

More Ram trucks recalled over tailgate issue

Almost a year ago Fiat Chrysler recalled roughly 1.6 million Ram trucks over an issue with the locking power tailgate. The actuator limiter tab for the power locking mechanism could fracture, which would permit the actuator's lock-rod control to move beyond its limits. That would pull the locking rods open, thereby allowing the tailgate to open at any time. The 2018 recall covered Ram 1500, 2500, and 3500 pickups from the 2015 to 2017 model years, with the five-foot-seven and six-foot-four beds and the power locking tailgate option. Trucks with eight-foot beds, and those with manual-locking tailgates, were excluded. The trucks with eight-foot beds have been added to the recall as of earlier this month, putting 410,351 more trucks in the pool. According to Consumer Reports, Ram redesigned the locking assembly on the other two shorter bed sizes for trucks built after August 2, 2017, which was the end of the 2017 model year. But the eight-foot long-bed trucks didn't get the redesigned part until April 2, 2018 for some reason, making all eight-foot-bed pickups from the 2015 model year to April 1, 2018 part of the recall equation. FCA says it's not aware of any accidents or injuries because of the issue. The company plans to notify owners on June 28. The paperwork filed with the National Highway Traffic Safety Administration doesn't advise owners to stop driving the trucks, but nor does it instruct owners on how to address the problem in the meantime. Sounds like bungee cords might be the go. The fix is estimated to take 30 minutes at the dealer and entails removing the tailgate cover and installing a stop block to prevent the locking actuator's pivot arm from traveling too far. FCA says it will reimburse owners for any other repairs made to address the problem. Meanwhile, owners can contact Fiat Chrysler Automobiles customer service at 800-853-1403, and refer to FCA's number for this recall, V44. The NHTSA campaign number is 19V-347. Last year's recall comes under FCA number U74, and NHTSA campaign number 18V-486. Ram's not alone on this field. The NHTSA continues to investigate the 2017 Ford Super Duty pickups for a similar issue.

2018 Ram ProMaster Quick Spin Review | Big van, big fan

I've moved a lot over the past decade or so. Since the beginning of 2008, I've held nine different addresses: five in Alabama, two in California and two in Michigan. I've had a lot of experience moving, sometimes multiple times to multiple states in a single year. Simply put, I get around. And f or most of these moves, I made do with SUVs, hatchbacks, borrowed pickups or rented box trucks. After putting more than 2,000 miles on a GMC Savana during my (second) move to from Alabama to California, I was fed up with the headache of it all. The GMC had no cruise control, no sound deadening and a V8 that downed fuel with the gusto of a drunk at an open bar. It was an almost entirely unpleasant experience. Yes, I know that's how trucks used to be, but when there's an alternative, I'll take it. This latest move — all of 2.2 miles — was the shortest I'd had in years. While our long-term 2018 Honda Ridgeline would have sufficed for 90-percent of the move, it isn't quite long enough to move two couches, a shelf and a king-size bed. Sure, I could have gone to U-Haul, but why bother there was a Ram ProMaster in the local fleet that I could put to good use? I wanted to really see how far things have come in recent years. My chariot was a long-wheelbase high-roof van in work-site white. It's as inoffensive and anonymous as they come. The ProMaster is based on the Fiat Ducato, and it's an unfortunate looking machine, though I doubt many people in the market for a good work van give much thought to the van's design. There are a lot of variations of the ProMaster when it comes to wheelbase and cab configurations, but all models have the same standard drivetrains. Power from the 280 horsepower V6, like the one in the van I drove, is sent to the front through a six-speed automatic. A 3.0-liter turbo-diesel V6 is optional, boosting torque from 260 pound-feet to 300 pound feet, but it's paired with a less-than-stellar automated manual transmission that's not nearly as smooth or refined as its torque-converter counterpart. The seating position was high and commanding. It's a bit of a climb to get into, but once you're seated it's actually quite comfortable. Since you're nearly on top of the front wheels, forward visibility is excellent. The passenger area is spartan but packs tons of little cubbies, pockets and cup holders. I found perfect spots to stick extra bungee cords, gaffers tape and ratchet straps. Compared to the old vans I was used to, it was a revelation.