2014 Ram 1500 on 2040-cars

Auto blog

2020 Ford Super Duty Tremor vs. 2020 Ram 2500 Power Wagon: How they compare on paper

(Editor's Note: Due to inconsistencies in manufacturer reporting methods for ground clearance, an earlier version of this article stated the Ram Power Wagon's "ground clearance" to be 14.3 inches when in fact that is its "running clearance," which is deemed the ground to the lowest point of the truck MINUS the axles. The numbers below now reflect true ground clearance, or the ground to the lowest point of the truck, period. The chart and text have been updated to show both measurements for maximum accuracy and clarity.) For several years, the Ram 2500 Power Wagon has been the unquestioned king of heavy duty off-roaders. But competition is coming, and some of the strongest is from the 2020 Ford Super Duty Tremor. We decided to take a look at these trucks' specs and features to see how they compare in the realm of capability. The raw numbers are below along with some notes on each truck's unique features that go beyond the spec sheet. Off-road capability While both of these trucks boast impressive clambering abilities, each with particular strengths. The Super Duty Tremor earns points for better ground clearance and axle clearance, as well as approach angle. Some of the credit goes to the larger 35-inch tires and a shortened front air dam. On the other hand, the Power Wagon leads the Ford in departure angle, and in the ramp travel index. The latter is largely the result of the Power Wagon's electronically disconnecting sway bars, and for those unfamiliar, the ramp travel index measures articulation by having a truck drive one wheel up a ramp with the other on the ground. The farther the truck goes with the ground wheel in contact with the, well, ground, the better the score and the better the articulation. Numbers aren't everything, though. It's important to look at the equipment each truck offers, and things are closer, here, but the Ram still has an edge. Both feature off-road-friendly solid axles at both ends, but only the Power Wagon has fully locking differentials front and rear. The Tremor has a locking rear differential while the front is a limited-slip differential. The Power Wagon comes standard with a 12,000-pound integrated Warn winch, whereas such a winch is an option on the Tremor. The Tremor has its own unique features, though, including the 35-inch tires rather than the Ram's 33-inchers, and it has Ford's fancy off-road cruise control function called Trail Control. Both trucks have shocks and springs tuned for off-road use.

Stellantis not looking for further mergers, including with Renault

MILAN — Stellantis Chairman John Elkann on Monday denied the carmaker was hatching merger plans, responding to press speculation about a possible French-led tie-up with rival Renault. Elkann said that the Peugeot owner, the world's third largest carmaker by sales, was focused on the execution of its long-term business plan. "There is no plan under consideration regarding merger operations with other manufacturers," said Elkann, who also heads Exor, the Agnelli family holding company that is the largest single shareholder in Stellantis. After abandoning the Russian market, at the time its second largest after France, and reducing the scope of its global cooperation with Nissan, Renault has been seen as a potential M&A target. Speculation intensified after an electric vehicle market slowdown forced it last week to cancel IPO plans for its EV and software unit Ampere. Its market cap remains stubbornly low at little over 10 billion euros ($10.8 billion) despite a financial recovery over the past few years. Stellantis, the product of a 2021 merger between France's PSA and Fiat Chrysler and one of the most profitable groups in the industry, has a market cap of more than 85 billion euros when unlisted shares are factored in. It has a 14 brand portfolio also including Citroen, Jeep, Opel and Alfa Romeo. NEWSPAPER REPORT Italian daily Il Messaggero had said on Sunday that the French government, which is Renault's largest shareholder and also has a stake in Stellantis, was studying plans for a merger between the two groups. A spokeswoman for Renault said on Monday the group did not comment on rumors. France's Finance Ministry had declined to comment on Sunday. Stellantis has crossed swords with the Italian government, which has accused it of acting against the national interest on occasions. Industry Minister Adolfo Urso last week raised the prospect of the Italian government taking a stake in Stellantis to help to balance the French influence. Renault shares pared gains after Elkann's comments to stand 1.2% higher by 1220 GMT, having initially risen more than 4%. Stellantis CEO Carlos Tavares, a Portuguese-national, last week said in an interview with Bloomberg that the group was "ready for any kind of consolidation" and that its job was to make sure that it would be "one of the winners". Analysts, however, question the rationale of a Stellantis-Renault merger, which would also expand the group's excess capacity in Europe.

Ram ramping up MI truck production, does deal with Texas Rangers

Thanks to a host of upgrades at the Warren Truck Assembly Plant in Michgan, Ram Trucks is boosting production of the already strong-selling Ram 1500 to build 28,585 more of them a year. That works out roughly to five more per hour, or an additional 100 per day. The major key to the improvements was redesigning 353 assembly workstations to allow employees complete their tasks more efficiently. According to Ram, the expansion was done to meet growing demand for the pickup.
These kinds of comprehensive changes can't happen over night, obviously. From the end of 2013 through the summer shutdown in August, the Warren Truck plant received automation tweaks in the body shop and upgrades to the color booths in the paint shop.
However, the biggest shift was working with "UAW-represented team leaders and operators" to examine every workstation for efficiency improvements. In that analysis, the company identified and altered over 100 problems that could have caused an injury. What really helped to boost the production rate so significantly was moving about 300 parts, or grouping them into kits for better ergonomics, and eliminating walks to grab tools. Once everything was done, about 63 percent of workers at the factory got updated training.