2013 Ram 1500 Laramie on 2040-cars

Auto blog

Ram heavy-duty trucks look more conservative than new Ram 1500

We've had a pretty good peek at the 2019 Ram 1500 thanks to spy shots and renderings. (UPDATED January 2018: Here's the full reveal from the Detroit Auto Show.) And from what we've seen of it, it's a major departure from Rams of the past. We haven't seen as much of the Ram heavy-duty line, but these spy shots caught one out on the town, and it appears the Ram 2500 and 3500 will have a less controversial design. The big-rig tall grille is still the truck's focal point, but the design is a familiar one, featuring the same look featured on the current Ram's luxurious range-topping trims like the Ram Laramie Longhorn. We'll have to wait to see if the new heavy-duty trucks will continue to use this grille solely for range-topping trims and if the 1500's new look will venture up to its big brothers, and therefore banish the crosshairs for good. Regardless of the grille design, the headlights still sit fairly low next to it. That emphasizes the semi-truck design since the tops of the fenders are lower than the top of the hood, which cascades to meet said fenders. The headlights also look potentially carry-over. Really, there are so many similarities it leads us to believe the new heavy duty might be more of a refresh than a completely new design. Another interesting thing to note is that this Ram appears to use a similar drivetrain and suspension to the current heavy-duty trucks. Like the vast majority of trucks, it has a solid rear axle, but probably with coil springs as Ram currently does. Up front, though, it seems the solid front axle has also been retained. This should be good news for fans of the off-road-ready Power Wagon. We're probably still a ways away from seeing the heavy-duty Rams. Last year, we learned a rumor that the heavy-duty trucks were delayed for an unspecified amount of time. We wouldn't expect to see anything official about the truck until at least 2019, about a year after we expect to see the 2019 Ram 1500 revealed. Related Video: Featured Gallery Ram Heavy Duty spy shots View 16 Photos Image Credit: KGP Photography Spy Photos RAM Truck

Ram 1500 TRX too tame for you? Hennessey cranks its Hemi V8 to 1,012 horsepower

Ram captured the top spot on the horsepower podium when it released the Hellcat-powered 1500 TRX in 2020. The truck's 702-horsepower output places it comfortably ahead of the Ford F-150 Raptor, at least for now, but American tuner Hennessey saw plenty of room for improvement. It added over 300 horses to the TRX's cavalry. Hennessey is a master in V8-ology, so it was only a matter of time before it injected more power into the TRX. It announced two models named Mammoth 900 and Mammoth 1000, respectively, and each number vaguely corresponds to the V8's new output. The 900's 6.2-liter produces 912 horsepower and 873 pound-feet of torque, increases of 210 and 223, respectively, compared to the standard TRX. Hennessey achieved these figures by upgrading the supercharger pulleys and making relatively basic changes to the intake and exhaust systems. Stepping up to the 1000 unlocks 1,012 horsepower and 969 pound-feet of torque, numbers that give the 6,300-plus-pound truck the uncanny ability to reach 60 mph from a stop in 3.2 seconds. It flies through the quarter mile in 11.4 seconds at 120 mph. Building a pickup with supercar-like acceleration required installing a bigger, 2.65-liter supercharger, adding high-flow fuel injectors, and recalibrating the ECU. Intake and exhaust modifications are on the menu, too. Surprisingly, it doesn't sound like Hennessey made significant internal changes to the engine or to the transmission, which suggests the standard components can handle a massive amount of power. Context is useful here. Released in 2013, the fifth and final generation of the Dodge-turned-SRT-turned-Dodge again Viper took 3.3 seconds to sprint from zero to 60 mph, and it logged an 11.5-second quarter-mile time. Previewed in a computer-generated sketch, the Mammoth 1000 (shown above) also receives 20-inch wheels wrapped by 35-inch off-road tires, a 2.5-inch suspension lift, custom bumpers on both ends, extra LEDs up front, electronic fold-out steps, plus an array of model-specific emblems. Inside, Hennessey added a numbered plaque. 200 units of the Mammoth 1000 will be available for the 2021 model year, and pricing starts at $135,350 including the cost of the donor truck (which carries a base price of $71,790) and a warranty valid for two years or 24,000 miles. Put another way, you get 30.6% more power than stock for about 40% more money.

Ram, Jeep redesigns on hold, Alfa Romeo models may come sooner

Last summer, FCA outlined an ambitious five-year plan that sketched out the company's product intentions for each of its brands through the end of 2018. However, even the best strategies sometimes need tweaking. According to Reuters after speaking with unnamed people at auto suppliers, FCA is now possibly delaying at least a dozen projects in North America for a variety of reasons. From vehicle to vehicle, these postponements allegedly last anywhere from just a few months to over a year. The sources from the suppliers claim that in some cases these tweaks are for engineering and design changes. The next-gen Ram 1500 reportedly has among the shorter delays and is being pushed from mid-2017 to November 2017, according to Reuters. Also, the much-discussed future Jeep Wrangler is allegedly moving a little later to July 2017. Among the vehicles purportedly seeing longer delays, the next-gen Grand Cherokee could get pushed back about a year to 2018. That then forces the launch of the three-row, luxury Grand Wagoneer to be even further away. Jeep's upcoming C-segment CUV and the all-new Chrysler 300, Dodge Charger, and Challenger might also see postponements. The one brand allegedly seeing an accelerated plan is Alfa Romeo. Without going into detail, the sources from these suppliers claim that the Italian automaker is getting even more vehicles for its lineup and could get them even faster than planned. "Those plans need to be flexible and fluid, with the potential to add some vehicles, pull some forward and extend the life cycle of others," FCA said to Reuters about all of these allegations. "We look at these programs on a vehicle-by-vehicle basis." Investment in the auto industry has been a major topic for FCA CEO Sergio Marchionne as of late. He believes consolidation is necessary so that companies aren't burning money on the same projects. Related Video: News Source: ReutersImage Credit: Bill Pugliano / Getty Images Plants/Manufacturing Alfa Romeo Chrysler Dodge Fiat Jeep RAM Sergio Marchionne FCA fca us