2012 Ram 1500 Laramie Limited...lifted on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Ram and Jeep Wrangler drive Fiat Chrysler profits up 61 percent

MILAN — Italian American automaker Fiat Chrysler says fourth-quarter net profits rose by 61 percent, powered by North American sales of the all-new Ram 1500 and Jeep Wrangler. Fiat Chrysler Automobiles on Thursday reported quarterly net profits of 1.29 billion euros ($1.46 billion), compared with 804 million euros in 2017. Revenues rose 6 percent to 30.6 billion euros. North America profits grew by 19 percent to 6.2 billion euros, accounting for the lion's share of the automaker's global profits. The carmaker continued to have trouble in Asia, which swung to a loss due to market weakness in China and more competition in Fiat Chrysler's core SUV market. Europe also lost ground, with profits dipping 44 percent on lower shipments and weaker pricing, while Latin America more than doubled. Based on the company's earnings last year, 44,000 unionized U.S. auto workers will get $6,000 profit-sharing checks. That's $500 more than in 2017, but smaller than U.S. rivals Ford and General Motors. On Wednesday, GM announced that workers would get $10,750, while Ford workers will get $7,600.Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2020 Ram 3500 heavy duty interior spied

The 2020 Ram 2500 and 3500 trucks continue their steady testing regimen, and the engineers are still keeping the trucks under careful wraps. Or at least they are with the outside. As the photos above show, some test drivers got a little sloppy with interior coverings, and our spy photographer took advantage of the situation. And the good news is that the interior will be basically identical to that of the 2019 Ram 1500. We say good news because the Ram's stylish interior and well-thought-out controls are part of why it's our favorite fullsize pickup right now. This particular model has the 8.4-inch UConnect touchscreen infotainment. Since the entire center stack is the same as the 1500, we wouldn't be surprised if the monster 12-inch display were to be available on high-end trims. The small 5-inch infotainment will probably be the standard option. Another interesting detail is that this test truck does not have the rotary shift dial shared with the Ram 1500 and various other Chrysler products. Instead, it has a traditional steering column-mounted shift lever. As for the outside, nothing new is revealed to us. We shouldn't have to wait too long to see the production truck, though. We expect it to be revealed early next year. What we've seen so far seems to indicate that the heavy duty Rams will have styling a little closer to the old model than to the new 1500. Still, expect grilles and other cues from the lighter duty model, just translated to a slightly different shape. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.