2011 Ram 1500 on 2040-cars

Auto blog

2019 Ram 1500 finally revealed | All new, from headlights to hybrid system

Few categories are as hotly contested as the full-size truck segment. The passion from both automakers and loyal truck owners is fierce. See any number of Calvin window decals for example. Well, a new Ram 1500 is finally here, and it's lighter, stronger and better equipped than ever before to take on the Ford F-150 and the Chevy Silverado. In addition to new styling and a hugely versatile interior, both the V6 and V8 Ram 1500 are available with a 48-volt mild-hybrid system. Despite looking similar to the current Ram, this isn't merely an update. The truck is all new inside and out, improving on what worked and fixing what was aging. Overall weight is down 225 pounds, with 120 of those coming from the chassis and frame. And 98 percent of the frame is made from high-strength steel, with aluminum making up a small amount in parts like the transmission crossmember and engine mounts. The Ram 1500 also gets an aluminum hood and tailgate. The weight may be down, but the 2019 Ram 1500 is longer and wider than before. The bed height, too, has increased. Visually, it's difficult to notice the increased size. The overall design is an evolution of what Ram has offered for decades. The most obvious change is the lack of a crosshair grille, a staple since 1994. The new "RAM" grille started as an option but now carries over to every single model. It's not going to be popular with everyone, but we're sure Mopar or some other parts supplier can fill your t-shaped void. The drop fender that also debuted on the '94 Ram has been lifted, giving the front a far more upright face. There are two different headlight designs, depending on the trim and options. The top-tier LED units are wide and slim, while the standard lighting looks similar to what we have now. The front bumper can be chrome or paint, while the chrome accents carry around to parts like the new 1500 badge on the hood. Tow hooks are lower and further apart than before, while the parking sensors have been better integrated into the design. Like the headlights, the taillights are an evolution of the current shape. Both halogen and LED units are available. The full-width steel rear bumper can be had in either chrome or body color. As for paint, there are 12 colors in total, with three two-tone variants. If that's not enough variety, there are 16 new (six-lug!) wheel designs to choose from, ranging from 18 to 22 inches. View 160 Photos Inside, the 2019 Ram 1500 is more refined and practical than ever before.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Detroit Three automakers and UAW will continue to require masks

GM CEO Mary Barra at a Warren, Mich., training center in September. (Reuters)   WASHINGTON — Detroit's Big Three automakers and the United Auto Workers (UAW) union said on Wednesday that workers will continue to be required to wear masks in workplaces. The joint statement from the UAW and General Motors, Ford and Chrysler-parent Stellantis NV said it was continuing the requirements "out of an abundance of caution." The U.S. Centers for Disease Control and Prevention (CDC) said in May that fully vaccinated people do not need to wear masks in most instances, including at work. The UAW and the automakers said temperature screening upon entering facilities is expected to be phased out. The UAW and automakers continue to recommend autoworkers get vaccinated. Many U.S. employers are still requiring vaccinated workers to wear masks in workplaces. Volkswagen AG's U.S. unit said it will "no longer require masks for fully vaccinated employees after June 21, and will continue to follow CDC guidelines." Toyota is among the automakers that has ended temperature checks and entry questionnaires at U.S. plants but it is continuing to require facial coverings. Honda and Nissan said they had made no changes to their U.S. employee COVID-19 requirements.   Plants/Manufacturing Chrysler Dodge Ford GM Jeep RAM Safety coronavirus