on 2040-cars

Auto blog

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.

2013 Ram HD and Chassis Cab pickups are ready for work [UPDATE]

Auto enthusiasts often point to the pony car wars as the last bastion of one-upsmanship among Detroit's automakers, but the truth is, the pickup wars are every bit as competitive - if not more so. Auburn Hills keeps a ready eye on what their rivals in Dearborn and Detroit are doing, and vice-versa. Today, that battle is renewed with the introduction of Ram's 2013 Heavy Duty and Chassis Cab lines at the State Fair of Texas. Why a state fair? The Banner State is the perfect battleground for pickup supremacy, as Texas accounts for one of every five pickups sold in the U.S.
Towing and hauling metrics are poised for a substantial improvement. "... and not just by a little bit."
On the HD front, Chrysler is boasting that its brand-new heavies will bring best-in-class towing, torque, payload and Gross Combined Weight Rating, but thus far, it's declining to cite what those figures are. For the moment, though, Fred Diaz, President and CEO of Ram told us at an Auburn Hills background event earlier this month that key towing and hauling metrics are poised for a substantial improvement. "And not just by a little bit. I think we're going to shock the world," said Diaz.

Ram 1500 to get Pentastar V6 option in top-shelf models

Ram has seen such positive customer feedback from its 3.6-liter Pentastar V6 and TorqueFlight eight-speed automatic transmission in the Ram 1500 that it's bringing the powertrain upmarket, and it's now going to be available in truck's Laramie trim level (Laramie Limited pictured above). The new choice means better fuel economy and lower pricing in one of the 1500's higher-end models.
A Ram 1500 Laramie Quad Cab 4x2 with the 3.6-liter Pentastar and eight-speed automatic will retail for $38,775, plus a $1,195 destination charge. It's a savings of over $1,000 over the trim's current starting price.
Ram says the decision to offer the V6 option was customer driven. "Today's V6 engine is a lot stronger than yesterday," said Nick Cappa of Ram Truck media relations to Autoblog. Cappa notes that dealers have reported buyers returning from test drives who can't believe there are only six cylinders operating underhood.