Certified One-owner Clean Carfax 36k Miles Navigation, Pdk on 2040-cars

Auto blog

Toyo Tires will bring another wild catalog of rides to SEMA

Toyo Tires carts all kinds of toys to SEMA every year, the rubber company planning another 30 or so automotive exhibits this year in two locations. One of them, the Baja 911, comes with a pedigree not usually associated with the bewildering wares hawked at the Las Vegas show. TJ Russell was once lead fabricator for Singer Vehicle Design, now he's the head of Russell Built Fabrication in Sun Valley, CA. Sticking with the marque he knows well, Russell started with a 1991 Porsche Carrera 4 cabriolet, fitted the interior with a full roll cage, then built a hardtop around it to design a desert runner channeling the old Rothmans safari 911s. Underneath that bodywork lives a box-plate trailing arm suspension with 12 inches of travel, working 15-inch Fifteen52 FIA-approved Gravel wheels and 30-inch Toyo Open Country A/T II tires. Power comes from a purpose-built 3.8-liter air-cooled flat-six with about 350 horsepower — 100 hp more than stock — in a car that weighs 400 pounds less than the original. Oh, and as documented on Instagram with the tagline "All race outside, all business inside," the interior's full of quilted, cross-stitched leather, and Toyo says Russell's going to do a low-volume run of the Baja 911 starting early next year. ruffian-ford-mustang-sema-01 View 10 Photos Chris Ashton built a 1970 Ford Mustang Fastback called the Ruffian Mustang, inspired by the Trans Am Racing Series. The exterior changes are more subtle than one might think – the chin spoiler, hood scoop, and side mirrors are barely exaggerated versions of those on the original car, the intake vents astride the front lights and the steel bumpers teleported from 1970. Changes outside include de-chromed and flush-mounted glass, vented hood, front fenders that are dropped an inch, rear fender vents, dual side-exit pipes, and gargantuan fender flares over staggered Signature One wheels and Toyo Proxes 888 tires. The interior's fitted with a roll cage and race car workings. In spite of the Boss 427 badging, the engine's a 625-hp Chevrolet LS3 V8. button-built-ferrari-355-sema-01 View 13 Photos The Button Built Ferrari BB355TT picks up from last year's stanced BB328GTS widebody that gave many Internet denizens heart attacks. Laid up on a 1999 355 Berlinetta, the BB version appends a widebody kit designed Mitchell Button, rendered by Khyzyl Saleem and drenched in Azzuro la Plata, a color from Ferrari's Scagliette palette first used on a 1967 275GTB Le Mans racer.

Petrolicious finds a Porsche 356 that thrives on dirt roads

Matt Hummel is absolutely not the typical vintage Porsche owner. Instead, his mantra is simple: "Get it running!" In the latest video from Petrolicious, hop behind the wheel of a well-loved 1956 Porsche 356 for a blast over some rutted dirt and gravel roads with a fascinating owner. When he found it, Hummel's 356 had been sitting in a barn since the late '70s, and it looked extremely rough. Despite the beat condition, he eventually decided not to just let the coupe sit anymore and used some parts that he had to get it running again. Now, the Porsche with its flaking paint and ripped interior is Hummel's favorite companion for getting lost on rural roads. While Hummel's story is fascinating, Petrolicious does a superb job on the cinematography, too. This 356 lives in some picturesque surroundings, and the video captures that scenery beautifully.

2016 Porsche 911 GT3 RS prowls into Geneva with biggest NA engine in the 911 range [w/video]

We've been waiting for the debut of this road-going and race-ready Porsche 911 GT3 RS for quite some time now. As is typical for high-profile sports machines, the new 911 has been foreshadowed with spy shots and information leaks aplenty, all pointing to this grand day at Geneva. Here she is. Just a glance at the duct-sliced bodywork and massive rear wing will tell you that this Porsche means business, but let's look at its bona fides. The heart of the matter, under that short rear deck, is the largest-displacement and most powerful naturally aspirated engine in the 911 family, with 500 horsepower and 338 pound-feet of torque developed by the 4.0-liter flat-six. That hoss of an engine is mated to a newly developed version of Porsche's PDK dual-clutch gearbox – with functions such as "paddle neutral" that effectively works like depressing the clutch on a standard manual, and a Pit Speed button for on the track. Working in concert, engine and trans allow the GT3 RS to sprint to 60 miles per hour in 3.1 seconds, hit a quarter mile in 11.2, and lap the Nurburgring Nordschleife in just seven minutes, 20 seconds. (That 'Ring time makes it the fastest current 911 around the benchmark course, and five seconds faster than the current 911 GT3 – so quick.) Weight has been saved via exotic materials; the car sports a magnesium roof and carbon fiber for the trunk and engine lids. Overall the RS is 22 pounds lighter than the GT3, but also boasts a lower center of gravity. As we said at the top, there's a wide, low and aggressive body kit on the GT3 RS, all engineered with racing performance in mind. That huge rear wing is balanced in the front by a deep chin spoiler, and the front wheel arches have been punctuated with vents that help to increase downforce on the front axle. The roll cage is the most obvious interior modification to let one know that this is a racing tool, but Porsche has also slathered the space in Alcantara and installed carbon-fiber bucket seats (based on those found in the 918 Spyder) to drive the point home. The cost of such racing glory will be steep at $175,900 plus a $995 destination charge, but not out of the scope of the current ask for the 911 range, when you consider that a Turbo S runs over $180k. Look for 911 GT3 RS deliveries to start in July of this year in the US, and for track days to be more competitive for the addition. Porsche 911 GT3 RS: the Ultimate 911 for High-Performance Drivers Atlanta.