Super Low Miles, Boxter S on 2040-cars

Auto blog

Submit your questions for Autoblog Podcast #344 LIVE!

We're set to record Autoblog Podcast #344 tonight, joined by Doug DeMuro, author of Plays With Cars, formerly of Porsche Cars North America, and all-around swell guy. You can drop us your questions and comments via our Q&A module below, and we'll give them extra-diligent attention. Subscribe to the Autoblog Podcast in iTunes if you haven't already done so, and if you want to take it all in live, tune in to our UStream (audio only) channel at 10:00 PM Eastern tonight.
Discussion Topics for Autoblog Podcast Episode #344
BRZ STI?

Porsche tuners 9ff, SpeedArt going bankrupt

Times are tough in Europe right now, and that unfortunately has reaped disastrous consequences for some of its smallest niche automakers. Gumpert, Wiesmann, Artega and Lola have all filed for bankruptcy this year, and it appears that tuners are not immune to the tough times, either.
Word coming in from across the pond suggests that 9ff and SpeedArt - two of the biggest names in Porsche tuning - have filed for bankruptcy as well. 9ff is best known for the GT9, a radical hypercar barely based on the 911, while SpeedArt was once of the foremost tuners of Porsches.
Fortunately there are still plenty of tuners ready to take a wrench to your Elfen, but the reported demise of these two makes the market a little bit smaller and - for Porsche enthusiasts - maybe the world a little bit lonelier, too.

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.