1998 Porsche Boxster Luxury Sport Convertible Premium Soft Performance on 2040-cars

Auto blog

Ruf Turbo Florio is the Turbo Targa Porsche won't sell you

Porsche offers a staggering array of 911 variants. You can get the Carrera, Carrera S, Carrera GTS, Carrera 4, Carrera 4S, Carrera 4 GTS and Turbo and Turbo S (to say nothing of the GT3 and new GT3 RS). And with few exceptions, you can get each as a coupe, cabrio or Targa. Except you can't get a Turbo Targa. The partial-convertible model tops out at the GTS. But if the one thing you really wanted was a Targa with a turbo engine, the folks over at Ruf will be glad to hook you up with the tuned version you see here. It's called the Ruf Turbo Florio, taking the latter part of its handle from the second part of the Sicilian road race where Porsche got the name for its lift-top in the first place. But Ruf's take doesn't just match the factory Turbo's output – it far exceeds it: with 621 horsepower and 608 pound-feet of torque on tap, it'll put even the 911 Turbo S (on Sport Plus overboost, no less) to shame. Plus you can get it with a six-speed manual or seven-speed DCT, driving all four wheels like the factory Turbo or just the rear set like the GT2 that Porsche doesn't even make any more. It'll top out at 205 miles per hour, and all the while with the wind in your hair – but not too much of it. Related Video:

Porsche 911 GT3 RS spec sheet leaked, promises 500 hp

Axis of Oversteer has three pages of what's purported to be the spec sheet for the Porsche 911 GT3 RS, and it's got a few bolded items noting key differences with the already spectacular 911 GT3. Prime among them is its output, pegged at exactly 500 horsepower and 339 pound-feet of torque, which looks at first blush to be a minor bump: just 25 hp and 14 lb-ft over the GT3, and the redline drops 200 rpm to 8,800 rpm. If the document is accurate, though, there will be a hefty dose of weight loss to make the most of it. The bodyshell and doors are aluminum, carbon fiber reinforced plastic is used for those vented front fenders (the vanes are plastic), the front trunklid, the rear engine cover, and the rear wing, while the roof is made of magnesium and the side windows are polycarbonate. The bucket seats, door entry guards, and other interior trim pieces are also fashioned from CFRP, and it gets lightweight door panels with pull-loops. Elsewhere around the coupe, the body grows wider by 50 millimeters in front and 30 mm in back over a track that's 36 mm wider. There's a pit-lane speed limiter for track days, tinted taillights, an optional Clubsport package with a six-point seatbelt, and GT3 RS logos everywhere. It's looking more and more like this car was developed to define the word "epic." Featured Gallery Porsche 911 GT3 RS spec sheet Related Gallery 2016 Porsche 911 GT3 RS News Source: Axis of Oversteer Geneva Motor Show Porsche Coupe Performance 2015 Geneva Motor Show porsche 911 gt3

1986 Porsche 959 Prototype at Barrett-Jackson sees gavel fall at $440,000 [UPDATE: w/video]

Fans of Porsche in America have longed for the chance to buy a 959 ever since the German automaker produced and sold it (well, sold it everywhere but the United States...) in the 1980s. Well, they just had their chance. The car you see above is a Porsche 959 prototype built in 1986, and only one other running prototype still exists.
The 959 prototype can't be driven on public roads, as it carries no such certification. Somehow, we doubt that matters all that much to the new buyer - this one is probably going to be sitting in a collection. When the gavel finally fell, bidding had reached $400,000, plus a 10-percent buyer's fee.
Check out our high-res image gallery above to see this prototype up close, and scroll down below to watch a video of it crossing the auction block and for its official auction description.