2012 Awd S 4s White Black Sport Chrono Bose Adaptive Air Pasm Camera V8 Comfort on 2040-cars

Auto blog

Evo pits BMW M3 against Porsche Macan in drag battle

If you want to move five passengers in very rapid fashion and you've got a $75,000 budget, two newly introduced four-door models immediately come to mind - both are the highest performing vehicles in their respective segments. But which is faster off the line, to the 60-mile-per-hour benchmark or flat-out over an even longer run? Evo took both to paved aircraft runway to find out.
In lane one we've got the all-new Porsche Macan Turbo, which boasts a twin-turbocharged, 3.6-liter V6 rated at 400 horsepower and 406 pound-feet of torque. The Porsche is fitted with a seven-speed, dual-clutch gearbox, and the 4,244-pound crossover has the traction advantage of standard all-wheel drive. In lane two is the all-new BMW M3, powered by a twin-turbo 3.0-liter inline-six rated at 425 horsepower and 406 pound-feet of torque. It is also equipped with a seven-speed, dual-clutch gearbox, but only the rear wheels of the 3,595-pound sedan are driven. Both the BMW and Porsche arrive with launch control, which helps to remove driver error off the line.
Which automaker's launch control system is better off the line? Does all-wheel-drive grip give the crossover the advantage it needs to overcome its adversary's power-to-weight advantage? Will aerodynamics factor into the results? Which would you put in your garage, and why? The video may surprise you.

Porsche working on turbo V12 for Putin limo project?

Porsche is best known for building very well-regarded sports cars and better-selling utility vehicles. Come to the company with a big enough bag of cash, though, and the Porsche Engineering division can create just about anything. The group's past projects include working with Harley-Davidson, Mercedes-Benz and corporate cousin Audi, but if rumors prove true, then its latest partner might be the last one you'd expect.
Russian website Wroom reports that Porsche Engineering is building the engine for the Project Cortege government limousine project for Russian president Vladimir Putin. The mill is supposedly a turbocharged V12 displacing between 6.0- and 6.6-liters and making around 800 horsepower. When complete, it will reportedly be built by ZMZ with Russian-sourced parts.
The limo is expected to debut in 2017, according to Wroom, but it's just the beginning of Putin's grandiose plans, which also goes by the name of the Motorcade Project. The same platform is also meant to underpin several vehicles for use by the government, including an SUV, a small bus and a sedan. All of them would reportedly have a longitudinally mounted engine and all-wheel drive.

Toyo Tires will bring another wild catalog of rides to SEMA

Toyo Tires carts all kinds of toys to SEMA every year, the rubber company planning another 30 or so automotive exhibits this year in two locations. One of them, the Baja 911, comes with a pedigree not usually associated with the bewildering wares hawked at the Las Vegas show. TJ Russell was once lead fabricator for Singer Vehicle Design, now he's the head of Russell Built Fabrication in Sun Valley, CA. Sticking with the marque he knows well, Russell started with a 1991 Porsche Carrera 4 cabriolet, fitted the interior with a full roll cage, then built a hardtop around it to design a desert runner channeling the old Rothmans safari 911s. Underneath that bodywork lives a box-plate trailing arm suspension with 12 inches of travel, working 15-inch Fifteen52 FIA-approved Gravel wheels and 30-inch Toyo Open Country A/T II tires. Power comes from a purpose-built 3.8-liter air-cooled flat-six with about 350 horsepower — 100 hp more than stock — in a car that weighs 400 pounds less than the original. Oh, and as documented on Instagram with the tagline "All race outside, all business inside," the interior's full of quilted, cross-stitched leather, and Toyo says Russell's going to do a low-volume run of the Baja 911 starting early next year. ruffian-ford-mustang-sema-01 View 10 Photos Chris Ashton built a 1970 Ford Mustang Fastback called the Ruffian Mustang, inspired by the Trans Am Racing Series. The exterior changes are more subtle than one might think – the chin spoiler, hood scoop, and side mirrors are barely exaggerated versions of those on the original car, the intake vents astride the front lights and the steel bumpers teleported from 1970. Changes outside include de-chromed and flush-mounted glass, vented hood, front fenders that are dropped an inch, rear fender vents, dual side-exit pipes, and gargantuan fender flares over staggered Signature One wheels and Toyo Proxes 888 tires. The interior's fitted with a roll cage and race car workings. In spite of the Boss 427 badging, the engine's a 625-hp Chevrolet LS3 V8. button-built-ferrari-355-sema-01 View 13 Photos The Button Built Ferrari BB355TT picks up from last year's stanced BB328GTS widebody that gave many Internet denizens heart attacks. Laid up on a 1999 355 Berlinetta, the BB version appends a widebody kit designed Mitchell Button, rendered by Khyzyl Saleem and drenched in Azzuro la Plata, a color from Ferrari's Scagliette palette first used on a 1967 275GTB Le Mans racer.