1989 Porsche 944 S2 Coupe on 2040-cars

Auto blog

Porsche offering new tire option for Carrera GT

Let's face it: finding new tires for older cars can be challenging if tire manufacturers have stopped carrying the right sizes (this writer went through Hell to find a set of 205/60-13s). But what about tires for low-volume supercars, which use sizes that often won't fit on high-volume production vehicles? The Porsche Carrera GT isn't that old and tires are still available in the correct sizes, but the German automaker has shown its support of keeping them on the road by working with Michelin to give owners yet another tire option. Enter the Carrera GT-specific Pilot Super Sport.
It's common knowledge that tires are one of the most important pieces of the performance puzzle, and Porsche claims that the PSS tires, sized 265/35ZR-19 front and 335/30ZR-20 with Porsche's "N0" rating, will improve the Carrera GT's handling and stability all the way up to its claimed top speed of 205 miles per hour. That's important for a car with razor-sharp handling characteristics. They'll also net drivers a 10-percent increase in fuel economy on regular roads and up to 20 percent on racetracks, Porsche says.
The PSSs use cutting-edge tire technology to harness the Carrera GT's 610-horsepower. They have a dual-compound tread that's different from the inside of the tire to the outside, which, Porsche says, helps steering precision and increases maximum grip. Aramid fibers, which are lightweight but just as strong as steel, are used in the tire's belt to reduce unsprung weight.

700 horsepower Porsche GT2 RS is the wildest 911 ever

The Porsche 911 comes in a variety of flavors, each filling a certain taste for a certain customer. Sitting atop the range is the new 911 GT2 RS. In previous generations, the GT2 had a bit of a reputation as a widowmaker, a 911 with massive power that could snap and bite with the slightest agitation. Porsche says the new model has been civilized, but with 700 horsepower going to the rear wheels, we're sure it's going to be as mad as ever. Power comes from a highly massaged version of the 3.8-liter flat-six from the 911 Turbo S. The rear-mounted engine makes an outrageous 700 horsepower and 553 lb-ft of torque. Like we previously reported, the new car will use water injection to help keep things cool. The only transmission is Porsche's PDK. While enthusiasts may lament the loss of the manual, the RS models have always been about performance above all else. Simply put, the PDK is the better performance option. All that power translates to a 0-60 mph time of 2.7 seconds and a top speed of 211 mph. The engine makes 80 more horsepower than the previous model. That makes it the most powerful road-going 911 ever built. In fact, the 887 horsepower 918 Spyder is the only road-going Porsche that makes more power. The fact that Porsche trusts all of that power to go to the rear is both thrilling and terrifying at the same time. In order to manage traction, the GT2 RS gets a number of upgrades. Rear-wheel steering has become commonplace in the 911 lineup, so it's no surprise to see it here. Sticky tires with 265/35 ZR 20 section rubber at the front and 325/30 ZR 21 section rubber at the rear keep things planted. That comically large rear wing adds downforce, adding to stability. The car gets standard carbon ceramic brakes. While some people prefer traditional rotors for the street, like the PDK, this is all about performance. A number of intakes and outlets complement the rear wing and maximize aerodynamic efficiency. It's a bit of a surprise that with all the focus on downforce, the GT2 RS still manages to top out at 211 mph. The hood, front wings, wheel housing vents, door mirrors, side air intakes, parts of the rear end, and a number of interior components are all made from carbon fiber. The roof has been made of magnesium. If you want to drop any pretense of civility and comfort in the pursuit of speed, Porsche is offering a Weissach package that shaves off another 40 pounds from the already impressive wet weight of 3,241.

Porsche Mission E set for launch by 2020

Porsche will bring the Mission E electric sedan to production by 2020. The company's board just gave the thumbs up for further development of the vehicle on Dec. 4. "Even in a greatly changing motoring world, Porsche will maintain its front-row position with this fascinating sports car," Dr. Wolfgang Porsche, chairman of the supervisory board of Porsche AG, said in the model's announcement. The Mission E debuted at the 2015 Frankfurt Motor Show as a long-slung sedan in a mix of aluminum, steel, and carbon-fiber reinforced polymer. The concept featured two permanent magnet synchronous motors with over 590 horsepower, all-wheel drive with torque vectoring, and four-wheel steering. Porsche claimed that the model could reach 62 miles per hour in less than 3.5 seconds and offer a 500-kilometer (310.7-mile) range on the European testing cycle. Plus, the brand alleged the vehicle could lap the Nordschleife in less than eight minutes. The concept version also boasted an 800-volt charger to provide 80 percent of the range just 15 minutes after the driver plugged it in. We won't know for some time how much of this cutting-edge tech will actually arrive on the production version, but building the Mission E will coincide with 700-million euros ($765 million) in updates to the Porsche factory in Stuttgart-Zuffenhausen. In the coming years, the company will upgrade its engine factory to assemble electric motors. The automaker will also add a new paint shop, assembly plant, and enlarged body shop there. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Green light for Mission E The first 100% electrically powered Porsche is on its way. It will be launched at the end of the decade. The supervisory board of the Porsche AG today gave the green light for the Mission E project. Mission E, Concept Car, Press Conference IAA , Frankfurt, 2015, Porsche AG With the Mission E project, Porsche is continuing to back sustainable growth. In Stuttgart-Zuffenhausen alone more than 1,000 new jobs are being created. The company will be investing around 700 million euros in its main site there. Over the next few years, a new paint shop and a new assembly plant will be built. The existing engine factory is also being expanded for the production of electric motors. In addition, the existing body shop is being enlarged.