European 1976 Porsche 911 2.7 Targa 165hp - 4speed Manual on 2040-cars

Auto blog

The dream of the '90s is alive in Porsche 968 retro review

Only a month after Porsche confirmed that the next-generation Boxster and Cayman will get four-cylinder engines, it is apt that we have a MotorWeek retro review of the 1992 Porsche 968. Porsche hoped the 968 – nee 944 – and its naturally-aspirated, 3.0-liter, four-cylinder would revive sales of its entry-level line, but that didn't happen: going on sale in 1992, 1995 was its last year on the market. This was at a time when a stock 968 coupe cost $39,850, surpassing the out-the-door price of a loaded Chevrolet Corvette. The 968 convertible cost $51,000. That didn't stop MotorWeek's unanimous support of the 968, praising its design, the delivery of its 236 horsepower and 225 pound-feet of torque, and its handling - MotorWeek called it "Pure 90s performance," in spite of some fiddly switchgear and a noisy, firm ride. You can watch the review above. We have a feeling Porsche's four-cylinder fortunes will go much better this time around.

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

Porsche Macan spied, all lit up and dodging flurries

We've seen the upcoming Porsche Macan testing on surface roads and even on the Nürburgring, but here we have our first spy shots showing a disguised prototype doing some winter testing in snowy conditions. Still obscured by plenty of camouflage attempting to mimic its larger Cayenne sibling, we still can't get a clear look at what the Macan's face and rump are going to look like, although it does appear that some details for the front lighting are starting to emerge.
Below the headlights, those are obviously decals trying to look like turn signal lenses, but it appears that there is still some sort of lighting being hidden judging by the small circles cut into the camo. Lower in the fascia, we can also see there are LED running lights not revealed on past prototypes. The entire rear end of this Macan prototype still appears to be tacked-on camo, but the side view appears to be in production form save for the poorly disguised rear quarter windows.
As we've seen in the past, Porsche engineers are still testing the Macan alongside the Audi Q5 with which it shares its platform. There has been no word as to when we could expect to see the Macan in production or concept form, but we'd have to guess that this compact crossover is getting ready to shed its camo very soon.