No Reserve Nr 2005 Pontiac Vibe Hb Runs Great Super Clean New Tires Sunroof on 2040-cars

Auto blog

GM replacing passenger airbags in over 243,000 Pontiac Vibes

General Motors is repairing over 243,000 additional examples of the 2003-2007 Pontiac Vibe in the US and Canada to replace their Takata-supplied passenger-side airbag inflators. The company has no reports of irregular deployments in the models, though. These aren't actually newly included vehicles in the massive safety campaign. As a twin to the Toyota Matrix, the Vibe was already included in Toyota's figures, but as Pontiac-branded vehicles, GM dealers are taking care of these replacements. They have been covered as part of the Takata campaign in the past. Toyota expanded its own Takata recall to passenger-side components for 1.365 million vehicles on June 16. Earlier, General Motors also issued a campaign for 330,198 examples of the 2007 and 2008 Chevrolet Silverado 2500HD, 3500HD, GMC Sierra 2500HD, and 3500HD pickups to replace their passenger-side parts. After exposure to moisture, it's possible for these inflators to ignite too quickly in an accident and spray shrapnel at occupants. GM Statement The Vibes are included in two Toyota recall campaigns - one for high absolute humidity (HAH) areas and one for non-HAH areas. Both are considered national recalls even though only vehicles in certain HAH states and territories are in the recall. Total Pontiac Vibe passenger air bag numbers for MY 2003-2007 (U.S. and Canada only): High Absolute Humidity 89,719 Non High Absolute Humidity areas 252,685 These are the totals, which include about 99,000 previously recalled. GM knows of no field issues - irregular deployments - with these air bag inflators.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...

Junkyard Gem: 2001 Pontiac Grand Prix GTP

John DeLorean began his career working on Packard's Ultramatic Twin transmission, but he made his greatest mark on the automotive industry during his 1956-1969 tenure at GM's Pontiac Division. There, he helped develop the first production car engine with a quiet timing belt instead of a noisy chain, among other engineering feats, but his real fame came from the development of two money-printing models based more on marketing than machinery: the GTO and the Grand Prix. While the GTO gets all the attention now, the Grand Prix set the standard for the big-selling personal luxury coupes that sold like mad for decades to come. Today's Junkyard Gem is an example of the most powerful Grand Prix available at the turn of the century, found in a Denver-area self-service yard during the summer. The Grand Prix got front-wheel-drive for 1988 and a sedan version for 1990, but then something very beneficial happened in the 1997 model year: supercharging! Various flavors of the venerable 3.8-liter Buick V6 engine (itself based on the early-1960s Buick 215 V8 and thus cousin to the Rover V8) received Eaton blowers, starting in the 1992 model year. The Grand Prix didn't get its introduction to forced induction until the 1997 model year, but it kept the boosted option until the final Grand Prix rolled off the line in 2008 (the final Pontiac followed within a couple of years). This one made 240 horsepower, making it King of Grand Prix engines until the 2005 model year (when the GXP and its 303-horse V8 engine showed up). The very last year for a Grand Prix with a manual transmission was 1993 (there had been a three-pedal Grand Prix drought from 1973 through 1988, just to put things in perspective), so this car has the mandatory four-speed automatic. The Grand Prix lived on GM's W platform for its last two decades, making it sibling to the Impala, Regal, and Intrigue in 2001. Until the 2004 model year, every W-Body Grand Prix was built at Fairfax Assembly in Kansas City (no, the other Kansas City). Production of the final generation of Grand Prix took place in Ontario. It seems fitting that this car's final pre-crusher parking spot would be between two other GM products of the same era: a Monte Carlo and a Vibe. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.