Hard Top Con Manual Coupe 2.4l Cd Locking/limited Slip Differential Abs on 2040-cars

Auto blog

Win a sports car 2022 | The best giveaways this week

Autoblog may receive a share from purchases made via links on this page. Pricing and availability is subject to change. No donation or payment necessary to enter or win this sweepstakes. See official rules on Omaze. The feeling of getting a new car is wonderful. Winning that new car, or even better, your dream car, feels even better, or so we would imagine. And Omaze is here with a chance to experience that feeling. You’re probably asking yourself, what does it take to win? First of all, according to Omaze, "no donation or payment is necessary to enter or win this sweepstakes." $10 will get you 100 entries in this sweepstakes, while $50 will get you 1,000 entries and $100 will get you 2,000 entries. The best part? Each paid entry raises money for a worthy cause. See more about these causes at Omaze. Here are our favorite vehicle giveaways weÂ’ve found online this week. 2021 Ford Mustang Mach-E GT Performance Edition - Enter at Omaze Regardless of what you think about Ford using the name Mustang for an electric crossover, one thing is for certain, the Mustang Mach-E GT is an impressive piece of machinery. Here are some numbers for you: 480 horsepower, 634 lb-ft of torque, 0-60 in 3.5 seconds and 260 miles of range. Price? Well, thatÂ’s really up to you, because if you enter to win this Mach-E GT. it can be as low as $0. Here are the specs of the Mach-E in question, according to Omaze: Maximum Seating: 5 Engine: fully electric motors Drivetrain: eAWD Exterior Color: Rapid Red Metallic   Interior Color: Black Maximum Horsepower: 480 hp  Maximum Torque: 634 lb-ft Acceleration: 0-60 in 3.5 seconds Range: 235 miles Approximate Retail Value: $75,500 Cash Alt: $56,625 Special Features: GT Performance Edition; panoramic fixed-glass roof; Ford Co-Pilot360™ Active 2.0 and 360-degree camera; Brembo brakes; RTR Design Package including 20” RTR Aero 5 wheels, Nitto NT555 G2 tires and RTR Speed Block graphics Win a Restored 1969 Pontiac GTO - Enter at Omaze Joel Stocksdale, News Editor: There are an awful lot of ways to build a restomod. And a lot of those ways can be boring or tasteless. This one is neither. This is a seriously classy Pontiac GTO. Under the hood is a 461 cu. in. V8 from Butler Performance that's based on an actual Pontiac V8, not just another Chevy engine. The whole thing is subtle with a low-key metallic green and clean gray wheels. There isn't any overly flashy chrome or decals.

Junkyard Gem: 1997 Pontiac Sunfire SE Convertible

For the entire 24-year production run of the GM J platform (best known for the Chevrolet Cavalier), the Pontiac Division offered new J-Body cars for sale in the United States. First there was the J2000, followed in quick succession by the 2000, 2000 Sunbird and Sunbird. The Sunbird stuck around until the Cavalier got a major redesign for the 1995 model year, at which point Pontiac changed the car's name to Sunfire. Today's Junkyard Gem is one of those early Sunfires, a top-of-the-line SE convertible with the optional big engine and manual transmission. The Sunfire was an extremely close sibling to the same-year Cavalier (by the late 1980s, all the other US-market GM divisions had dropped their J-cars, which meant no more Skyhawks, Cimarrons or Firenzas), quite difficult to distinguish from its near-twin at a glance. The base engine for the 1997 Sunfire convertible was the pushrod 2.2-liter straight-four that powered so many J-bodies of the 1990s. That engine produced just 120 gnashing, valve-floating horsepower, not much by late-1990s standards. For a mere 450 additional dollars, however, the 2.4-liter Twin Cam engine and its high-revving 150 horses could be had by '97 Sunfire buyers. That's what's in this car. This is one of the members of the Oldsmobile Quad 4 family, though some fanatics will yell at you if you apply that name to the versions that don't have big QUAD 4 lettering cast into the valve cover. This is the most powerful engine ever used in production Sunfires. For 1997, Pontiac offered a four-speed automatic transmission for no extra cost in the Sunfire convertible. Buyers of all other Sunfire models that year had to shell out either $550 or $810 ($1,026 or $1,511 in 2023 dollars) for a two-pedal rig. That means that the buyer of this car really wanted the five-speed manual transmission (or just hungered for the $810 credit offered in the fine print for takers of the manual). Plenty of free-breathing engine power, five-on-the-floor driving enjoyment and the open skies above. What a fun car! This one made it to nearly 180,000 miles. For this car with the Quad 4 under the hood and a clutch pedal on the floor, the MSRP was $18,539 (about $34,584 today). Its Cavalier LS convertible twin with the same engine/transmission setup cost $17,365 ($32,394 now). This car has a bunch of options, including the 15" Rally aluminum wheels, so the out-the-door price would have been higher. The last year for the Sunfire was 2005, same as the Cavalier.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...