2006 Pontiac Gto 6spd on 2040-cars

Auto blog

Why Pontiac should come back and how it can be relevant again

When I was a kid growing up in Metro Detroit, our family was always entwined in the General Motors empire. My dad and some of our relatives worked for GM in various capacities, and we had our fair share of Chevrolet, GMC, and even Buick products in our humble driveway. However, it was my Uncle Ed that always had a vehicle from the one GM brand that always appealed to me the most: Pontiac. Seeing him pull up in his Pontiac 6000 and later the '90s era Grand Prix sedan that replaced it was always an exciting occasion, and both of these models also reflected the playful spirit that once defined the Pontiac brand. Back when Pontiac first got its performance groove on in the '60s, names such as GTO, Firebird, as well as Bonneville became iconic nameplates in the broader muscle car era. The '80s saw Pontiac lose some of its styling heritage, but also try new things at the same time including turbocharging as well as the mid-engine sports car with the flawed but still sleek Pontiac Fiero. When the Pontiac brand was shuttered in 2009, it was a mere few years after I earned my drivers license, and also when Pontiac was just beginning to regain some of its lost luster. Granted cookie cutter efforts like the Pontiac G3, (Chevrolet Aveo) G5, (Chevrolet Cobalt) and G6 (Chevrolet Malibu) certainly did not help matters during Pontiac's final years on the market, but two models in particular offered a compelling glimpse into what could've been for the storied brand. The first was the Pontiac Solstice roadster/coupe. Originally introduced as a concept back in 2004, and championed by everyone's fighter jet flying auto executive Bob Lutz, the Solstice was designed to be a serious competitor to the Mazda Miata, and while its interior ergonomics were flawed and the top solution not ideal. It proved to be a fun little car to drive, and also a sales success for Pontiac with initial demand exceeding expectations.This was especially due to its lineup of engines with the 2.0 liter LHU turbocharged four-cylinder engine delivering 260 horsepower in GXP variants. The second and (inarguably my favorite Pontiac model) was the Pontiac G8 sedan. Originating in Australia as the Holden Commodore VE, the G8 was designed to rectify the multitude of sins created by the last generation Bonneville. Front wheel drive was pitched in favor of rear wheel drive, and for the first time in a long time interior ergonomics and cladding free exterior styling were key building blocks for success.

Toyota urges owners of old Corolla, Matrix and RAV4 models to park them until airbags are replaced

DETROIT — Toyota and General Motors are telling the owners of about 61,000 older Corolla, RAV4, Matrix/ Pontiac Vibe models to stop driving them because their Takata airbag inflators are at risk of exploding and hurling shrapnel. The urgent warning Monday covers: Certain Corolla compact cars and Matrix hatchbacks from the 2003 and 2004 model years. RAV4 small SUVs from 2004 and 2005. Also covered are about 11,000 Pontiac Vibes from 2003 and 2004, which are essentially the same as the Matrix and were made at the same California factory. Most of the vehicles are in the U.S. “If the airbag deploys, a part inside is more likely to explode and shoot sharp metal fragments, which could cause serious injury or death to the driver or passengers,” Toyota said in a statement. Owners can go to nhtsa.gov/recalls and enter their 17-digit vehicle identification number to see if their cars are affected. If you're not the original owner of the vehicle, the manufacturer's recall letter might not reach you, so be sure to do the VIN check. The recalled RAV4s have Takata driver's airbags while the Corolla and Matrix models have them on the passenger side. The Corolla and Matrix also are under a separate recall because their airbags can be deployed without a crash, the company said. Both companies said owners should contact a local dealer instead of driving the cars in for repairs. Dealers will provide options such as mobile repair, towing the car to a dealer, or vehicle pickup and delivery. Takata used volatile ammonium nitrate to create a small explosion to inflate airbags in a crash. But the chemical propellant can deteriorate over time when exposed to high temperatures and humidity. It can explode with too much force, blowing apart a metal canister and spewing shrapnel. At least 26 people have been killed in the U.S. by Takata inflators since May 2009, and at least 30 have died worldwide including people in Malaysia and Australia. In addition, about 400 people have been injured. The exploding airbags sent Takata of Japan into bankruptcy. The potential for a dangerous malfunction led to the largest series of auto recalls in U.S. history. About 100 million inflators were recalled worldwide. Recalls Pontiac Toyota Takata airbag recall

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...